Intrinsic Effects due to the Reduction of Thickness on the Mechanical Behavior of Nickel Polycrystals
Source abstract
Abstract
Uniaxial tensile tests were performed on high-purity nickel polycrystals with thicknesses (t) ranging from 12.5 to 3200 μm. The grain size (d) of each sample was set to a value close to 100 μm in order to avoid grain size effects. Experimental results highlight the intrinsic effect of the thickness on the mechanical properties of nickel. For plastic strains higher than 0.01, a strong softening of the flow stress is clearly observed when the t/d ratio decreases from four to one. This critical range is independent of the plastic strain. Transmission electron microscopy (TEM) investigations of dislocation structures were carried out in core and surface regions of samples plastically strained in the second hardening stage. It is shown that the mean dislocation cell diameter obtains values two or three times higher near free surfaces than in core areas for specimens with t/d ratios lying at a range of 1 to 4. This observation can be interpreted in terms of an increase in the mean free path of mobile dislocations in the second hardening stage. The transition between polycrystal and single-crystal behavior for nickel with constant grain size and various thicknesses is, therefore, an intrinsic effect related to progressively stronger surface softening effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. E. Arzt: Acta Mater., 1998, vol. 46, pp. 5611–26.10.1016/S1359-6454(98)00231-6 ↗
2. T. Fulop, W.A.M. Brekelmans, and M.G.D. Geers: J. Mater. Proc. Technol., 2006, vol. 174, pp. 233–38.10.1016/j.jmatprotec.2006.01.006 ↗
3. T.A. Kals and R. Eckstein: J. Mater. Proc. Technol., 2000, vol. 103, pp. 95–101.10.1016/S0924-0136(00)00391-5 ↗
4. J. Gil Sevillano, I. Ocaña Arizcorreta, and L.P. Kubin: Mater. Sci. Eng., 2001, vols. A309–A310, pp. 393–405.10.1016/S0921-5093(00)01733-0 ↗
5. S. Miyazaki, K. Shibata, and H. Fujita: Acta Metall., 1979, vol. 27, pp. 855–62.10.1016/0001-6160(79)90120-2 ↗
6. A.W. Thompson: Scripta Metall., 1973, vol. 8, pp. 145–48.10.1016/0036-9748(74)90461-X ↗
7. R.W. Armstrong: J. Mech. Phys. Solids, 1961, vol. 9, pp. 196–99.10.1016/0022-5096(61)90018-7 ↗
8. J.F. Michel and P. Picart: J. Mater. Proc. Technol., 2003, vol. 141, pp. 439–46.10.1016/S0924-0136(03)00570-3 ↗
9. L.V. Raulea, A.M. Goijaerts, L.E. Govaert, and F.P.T. Baaijens: J. Mater. Proc. Technol., 2001, vol. 115, pp. 44–48.10.1016/S0924-0136(01)00770-1 ↗
10. N. Hansen: Acta Metall., 1977, vol. 25, pp. 863–69.10.1016/0001-6160(77)90171-7 ↗
11. J.S. Stölken and A.G. Evans: Acta Mater., 1998, vol. 46, pp. 5109–15.10.1016/S1359-6454(98)00153-0 ↗
12. G. Simons, C. Weippert, J. Dual, and J. Villain: Mater. Sci. Eng., 2006, vol. A416, pp. 290–99.10.1016/j.msea.2005.10.060 ↗
13. M. Klein, A. Hadrboletz, B. Weiss, and G. Khatibi: Mater. Sci. Eng., 2001, vols. A 319–321, pp. 924–28.10.1016/S0921-5093(01)01043-7 ↗
14. B. Weiss, V. Groger, G. Khatibi, A. Kotas, P. Zimprich, R. Stickler, and B. Zagar: Sens. Actuators, 2002, vol. A 99, pp. 172–82.10.1016/S0924-4247(01)00877-9 ↗
15. P.J.M. Janssen, T.H. de Keijser, and M.G.D. Geers: Mater. Sci. Eng., 2006, vol. A 419, pp. 238–48.10.1016/j.msea.2005.12.029 ↗
16. C. Keller and E. Hug: Mater. Lett., 2008, vol. 62, pp. 1718–20.10.1016/j.matlet.2007.09.069 ↗
17. C. Keller, E. Hug, and D. Chateigner: Mater. Sci. Eng., 2009, vol. A 500, pp. 207–15.10.1016/j.msea.2008.09.054 ↗
18. I.R. Kramer: Trans. TMS-AIME, 1963, vol. 227, pp. 1003–10.
19. S. Berbenni, V. Favier, and M. Berveiller: Int. J. Plast., 2007, vol. 23, pp. 114–42.10.1016/j.ijplas.2006.03.004 ↗
20. E. Mazza, G. Danuser, and J. Dual: Microsystem Technol., 1996, vol. 2, pp. 83–91.10.1007/s005420050021 ↗
21. G. Simons: Ph.D. Thesis 15763, Swiss Federal Institute of Technology, Zurich, 2004.
22. C. Keller: Ph.D. Thesis, Université de Caen, Caen, France, 2009.
23. S. Hong and H. Hoffmann: Process Scaling, BIAS, F. Vollersten and F. Hollmann, eds., Bremen, Verlag, 2003, pp. 145–51.
24. F. Vollertsen, H. Schulze Niehoff, and Z. Hu: Int. J. Mach. Tools Manufact., 2006, vol. 46, pp. 1172–79.10.1016/j.ijmachtools.2006.01.033 ↗
25. A.W. Thompson: Acta Metall., 1977, vol. 25, pp. 83–86.10.1016/0001-6160(77)90249-8 ↗
26. P.B. Hirsch, A. Howie, R.B. Nicholson, D.W. Pashley, and M.J. Whelan: Electron Microscopy of Thin Crystals, 2nd ed., Butterworths, London, 1967.
27. C. Keller, E. Hug, R. Retoux, and X. Feaugas: Mech. Mater., 2010, vol. 42, pp. 44–54.10.1016/j.mechmat.2009.09.002 ↗
28. K. Sumino and M. Yamamoto: Acta Metall., 1963, vol. 11, pp. 1234–43.
29. X. Feaugas and H. Haddou: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2329–40.10.1007/s11661-003-0296-5 ↗
30. X. Feaugas: Acta Mater., 1999, vol. 47, pp. 3617–32.10.1016/S1359-6454(99)00222-0 ↗
31. C.B. Carter and S.M. Holmes: Phil. Mag., 1977, vol. 35, pp. 1161–72.10.1080/14786437708232942 ↗
32. H. Mecking: Work Hardening in Tension and Fatigue, A.W. Thompson, ed., TMS-AIME, New York, 1977, pp. 67–88.
33. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
34. M. Rudloff, M. Risbet, C. Keller, and E. Hug: Mater. Lett., 2008, vol. 62, pp. 3591–93.10.1016/j.matlet.2008.03.058 ↗
35. H. Mughrabi, K. Herz, and X. Stark: Acta Metall., 1976, vol. 24, pp. 659–68.10.1016/0001-6160(76)90086-9 ↗
36. H. Mughrabi: Mater. Sci. Eng., 2004, vols. A387–A389, pp. 209–13.10.1016/j.msea.2004.01.086 ↗
37. E. Nes: Prog. Mater. Sci., 1997, vol. 41, pp. 129–93.10.1016/S0079-6425(97)00032-7 ↗
38. A.W. Thompson, M.I. Baskes, and W.F. Flanagan: Acta Metall., 1973, vol. 21, pp. 1017–28.10.1016/0001-6160(73)90158-2 ↗
39. J.T. Fourie: Phil. Mag., 1967, vol. 17, pp. 735–56.10.1080/14786436808223026 ↗
40. H. Mughrabi: Phys. Status Solidi, 1971, vol. 44, pp. 391–402.10.1002/pssb.2220440140 ↗
41. T. Tabata and H. Fujita: J. Phys. Soc. Jpn., 1972, vol. 32, pp. 1536–44.10.1143/JPSJ.32.1536 ↗
42. J.T. Fourie: Strength of Metals and Alloys, 7th Int. Conf., Pergamon Press, New York, NY, 1986, pp. 99–104.10.1016/B978-0-08-031642-0.50024-6 ↗
43. K. Kolb and E. Macherauch: Phil. Mag., 1961, vol. 7, pp. 580–86.
44. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1989, vol. A 113, pp. 1–41.10.1016/0921-5093(89)90290-6 ↗
45. F.-H. Yeh, C.-L. Li, and Y.-H. Lu: J Mater. Proc. Technol., 2008, vol. 201, pp. 237–41.10.1016/j.jmatprotec.2007.11.138 ↗
46. F. Vollertsen, Z. Hu, H.S. Niehoff, and C. Theiler: J. Mater. Proc. Technol., 2004, vol. 151, pp. 70–79.10.1016/j.jmatprotec.2004.04.266 ↗
47. Y. Saotome, K. Yasuda, and H. Kaga: J. Mater. Proc. Technol., 2001, vol. 113, pp. 641–47.10.1016/S0924-0136(01)00626-4 ↗