Tensile properties and microstructure of haynes 25 alloy after aging at elevated temperatures for extended times
Source abstract
Abstract
The tensile properties of Haynes 25 alloy have been measured after various aging treatments, time, and temperature: as received; and aged at 600 °C for three months; 800 °C for 6 and 12 months; and 1000 °C for 3 and 6 months. Contour plots in temperature-ln (time) space were constructed based on the literature and our own data, detailing changes in yield strength, ultimate tensile strength, and tensile elongation. Scanning electron microscopy and transmission electron microscopy observations of the Haynes 25 alloy microstructure provided an explanation of why the properties changed with aging. Intense lattice distortions after aging at 600 °C, the presence of an α-Co3W, a L12-ordered, fcc phase, a=0.357 nm, after aging at 800 °C, and the nucleation and growth of W3Co3C carbides from aging at 800 °C and 1000 °C produced the changes in tensile properties. We did not observe either the Co2W Laves phase or Co7W6 γ phase in any of the material conditions we examined, using TEM of thin foils: as received and aged at 600 °C, 800 °C, and 1000 °C. Other researchers believe these phases cause a loss of ductility in the Haynes 25 alloy with prolonged high-temperature exposure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High Temperature Alloys and Creep · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. H.J. Beattie, Jr. and F.L. VerSnyder: Trans. ASM, 1953, vol. 45, pp. 397–428.
2. S.T. Wlodek: Trans. ASM, 1963, vol. 56, pp. 287–303.
3. N. Yukawa and K. Sato: Proc. Int. Conf. on Strength of Metals and Alloys I (ICSMA I), Omachi, Japan, Japan Institute of Metals, Omachi, Japan, 1967, pp. 680–86.
4. Haynes International, http://www.haynesintl.com/25alloy/H3057Cts.htm, last viewed June 28, 2004.
5. J.P. Moore: Oak Ridge National Laboratory, Oak Ridge, TN, private communication, June 2001.
6. J.P. Moore: Oak Ridge National Laboratory, Oak Ridge, TN, private communication, September 2002.
7. Haynes International, http://www.haynesintl.com/25alloy/H3057Cpf.htm, last viewed June 28, 2004.