journal article·2004-01

Simulation of the sintering densification and shrinkage behavior of powder-injection-molded 17-4 PH stainless steel

Young-Sam Kwon, Yunxin Wu, Pavan Suri, Randall M. German

Publisher page

Abstract

This study simulates the sintering behavior of powder-injection-molded 17-4 PH stainless steel to predict the geometry of the sintered components. Sintering is considered as the viscous deformation process of a porous body under the influence of sintering stress. Consequently, modified constitutive equations applicable to linear viscous, compressible material, based on a continuum-mechanics approach, were utilized in simulating the sintering kinetics, with grain-boundary diffusion as the dominant densification mechanism. Quenching and other experiments were conducted to quantify the densification and grain-growth behavior of the powder-injection-molded 17-4 PH samples during sintering, to determine the material parameters required for the constitutive model. The predictive capability of the model was verified by comparing the theoretical calculations with the experimentally observed variation in sintering shrinkage of the samples determined by dilatometry. The predictions underestimate shrinkage above 700 °C, a factor related to the volume change from the phase transformations observed during the sintering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. R.M. German and A. Bose: Injection Molding of Metals and Ceramics, Metal Powder Industries Federation, Princeton, NJ, 1997.
2. Y. Wu, D. Blaine, B. Marx, C. Schlaefer, and R.M. German: J. Mater. Sci., 2002, vol. 37, pp. 3573–83.10.1023/A:1016532418920 ↗
3. Y. Wu, D. Blaine, B. Marx, C. Schlaefer, and R.M. German: Metall. Mater. Trans. A. 2002, vol. 33A, pp. 2185–94.10.1007/s11661-002-0050-4 ↗
4. J. Besson and M. Abouaf: J. Am. Ceram. Soc., 1992, vol. 75, pp. 2165–72.10.1111/j.1151-2916.1992.tb04479.x ↗
5. R.M. McMeeking and L.T. Kuhn: Acta Metall. Mater., 1992, vol. 40, pp. 961–69.10.1016/0956-7151(92)90073-N ↗
6. K. Darcovich, L. Bera, and K. Shinagawa: Mater. Sci. Eng. A, 2003, vol. 341, pp. 247–55.10.1016/S0921-5093(02)00237-X ↗
7. S. Helle, K.E. Eastering, and M.F. Ashby: Acta Metall., 1985, vol. 33, pp. 2163–74.10.1016/0001-6160(85)90177-4 ↗
8. M.F. Ashby: Background Reading HIP 6.0, University of Cambridge, Cambridge, United Kingdom, 1990.
9. Y.-S. Kwon and K.T. Kim: ASME J. Eng. Mater. Technol., 1996, vol. 118, pp. 448–55.10.1115/1.2805941 ↗
10. J.C. Lassale, B. Sherman, and K. Bartone: in Advances in Powder Metallurgy and Particulate Materials, C.L. Rose and M.H. Thibodeau, eds., Metal Powders Industries Federation, Princeton, NJ, 1999, vol. 2, pp. 6.19–6.26.
11. Method for Determination of Density of Compacted or Sintered Powder Metallurgy Products, MPIF Standard No. 42, Metal Powder Industries Federation, Princeton, NJ, 2002, pp. 59–62.
12. Standard Test Methods for Determining Average Grain Size, ASTM Designation E 112-96, ASTM, Philadelphia, PA, 1996, p. 16.
13. P.E. Mchugh and H. Riedel: Acta Metall., 1997, vol. 45, pp. 2995–3003.
14. R.M. German: Sintering Theory and Practice, John Wiley & Sons, Inc., New York, NY, 1996.
15. R.M. German: Powder Metallurgy Science, 2nd Edition, Metal Powder Industries Federation, Princeton, NJ, 1994.
16. O. Gillia and D. Bouvard: Mater. Sci. Eng. A, 2000, vol. 279, pp. 185–91.10.1016/S0921-5093(99)00621-8 ↗