journal article·2013-01

Analysis of Tensile Stress-Strain and Work-Hardening Behavior in 9Cr-1Mo Ferritic Steel

B. K. Choudhary, D. P. Rao Palaparti, E. Isaac Samuel

Publisher page

Abstract

Detailed analysis on tensile true stress (σ)-true plastic strain (e) and work-hardening behavior of 9Cr-1Mo steel have been performed in the framework of the Voce relationship and Kocks-Mecking approach for wide range of temperatures, 300 K to 873 K (27 °C to 600 °C) and strain rates (6.33 × 10−5 to 6.33 × 10−3 s−1). At all test conditions, σ-e data were adequately described by the Voce equation. 9Cr-1Mo steel exhibited two-stage work-hardening behavior characterized by a rapid decrease in instantaneous work-hardening rate (θ = dσ/de) with stress at low stresses (transient stage) followed by a gradual decrease in θ at high stresses (stage III). The variations of work-hardening parameters and θ-σ as a function of temperature and strain rate exhibited three distinct temperature regimes. Both work-hardening parameters and θ-σ displayed signatures of dynamic strain aging at intermediate temperatures and dominance of dynamic recovery at high temperatures. Excellent correlations have been obtained between work-hardening parameters evaluated using the Voce relationship and the respective tensile properties. A comparison of work-hardening parameters obtained using the Voce equation and Kocks-Mecking approach suggested an analogy between the two for the steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. D.S. Wood, A.B. Baldwin, F.W. Grounds, J. Wynn, E.G. Wilson, and J. Waring: Ferritic Steels for Fast Reactor Steam Generators, S.F. Pugh and E.A. Little, eds., British Nuclear Energy Society, London, U.K., 1977, pp. 189–92.
2. S.J. Sanderson: Ferritic Steels for High Temperature Applications, A.K. Khare, ed., ASM, Materials Park, OH, 1981, pp. 85–99.
3. V.K. Sikka: Ferritic Alloys for Use in Nuclear Energy Technologies, J.W. Davies and D.J. Michael, eds., TMS-AIME, Warrendale, PA, 1984, pp. 317–27.
4. B.J. Cane and R.S. Fidler: Ferritic Steels for Fast Reactor Steam Generators, S.F. Pugh and E.A. Little, eds., British Nuclear Energy Society, London, U.K., 1977, pp. 193–99.
5. A. Alamo, J.L. Bertin, V.K. Shamardin, and P. Wident: J. Nucl. Mater., 2007, vols. 367–370, pp. 54–59.10.1016/j.jnucmat.2007.03.166 ↗
6. K.J. Harrelson, S.H. Rou, and R.C. Wilcox: J. Nucl. Mater., 1986, vols. 141–143, pp. 508–12.10.1016/S0022-3115(86)80091-5 ↗
7. J.H. Hollomon: Trans. AIME, 1945, vol. 162, pp. 268–90.
8. P. Ludwik: Elements der Technologischen Mechanik, Verlag Von Julius Springer, Leipzig, Germany, 1909, p. 32.10.1007/978-3-662-40293-1 ↗
9. H.W. Swift: J. Mech. Phys. Solids, 1952, vol. 1, pp. 1–18.10.1016/0022-5096(52)90002-1 ↗
10. D.C. Ludwigson: Metall. Trans., 1971, vol. 2, pp. 2825–28.10.1007/BF02813258 ↗
11. E. Voce: J. Inst. Metall., 1948, vol. 74, pp. 537–62.
12. E. Voce: Metallurgia, 1955, vol. 51, pp. 219–26.
13. U.F. Kocks: J. Eng. Mater. Technol., 1976, vol. 98, pp. 76–85.10.1115/1.3443340 ↗
14. H. Mecking and U.F. Kocks: Acta Metall. Mater., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
15. Y. Estrin and H. Mecking: Acta Metall. Mater., 1984, vol. 32, pp. 57–70.10.1016/0001-6160(84)90202-5 ↗
16. Y. Estrin: in Unified Constitutive Laws for Plastic Deformation, A.S. Krausz and K. Krausz, eds., Academic Press, New York, NY, 1996, pp. 69–106.10.1016/B978-012425970-6/50003-5 ↗
17. N.S. Mishra, S. Mishra, and V. Ramaswamy: Metall. Trans. A, 1989, vol. 20A, pp. 2819–29.10.1007/BF02670174 ↗
18. R. Kishore and T.K. Sinha: Metall. Mater. Trans. A., 1996, vol. 27A, pp. 3340–43.10.1007/BF02663885 ↗
19. P.V. Sivaprasad, S. Venugopal, and S. Venkadesan: Metall. Mater. Trans. A, 1997, vol. 29A, pp. 171–78.10.1007/s11661-997-0092-8 ↗
20. B.K. Choudhary, E.I. Samuel, K. Bhanu Sankara Rao, and S.L. Mannan: Mater. Sci. Technol., 2001, vol. 17, pp. 223–31.10.1179/026708301101509890 ↗
21. C.G. Shastry, M.D. Mathew, K. Bhanu Sankara Rao, and S.L. Mannan: Int. J. Pres. Ves. Pip., 2004, vol. 81, pp. 297–301.10.1016/j.ijpvp.2003.11.016 ↗
22. C.A. Hippsley and N.P. Haworth: Mater. Sci. Technol., 1998, vol. 4, pp. 791–802.10.1179/026708388790221953 ↗
23. B.A. Senior, F.W. Noble, and B.L. Eyre: Acta Metall., 1986, vol. 34, pp. 1321–27.10.1016/0001-6160(86)90019-2 ↗
24. B.K. Choudhary, S. Saroja, K. Bhanu Sankara Rao, and S.L. Mannan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2825–34.10.1007/s11661-999-0120-y ↗
25. E. Pink and A. Grinberg: Mater. Sci. Eng., 1981, vol. 51, pp. 1–8.10.1016/0025-5416(81)90099-9 ↗
26. D.P.R. Palaparti, B.K. Choudhary, E.I. Samuel, V.S. Srinivasan, and M.D. Mathew: Mater. Sci. Eng. A, 2012, vol. 538, pp. 110–17.10.1016/j.msea.2011.12.109 ↗
27. “Design and Construction Rules for Mechanical Components of FBR Nuclear Islands,” RCC-MR, Section 1, Subsection Z, Appendix A3.18S.22, 2002.
28. B.K. Choudhary, V.S. Srinvasan, and M.D. Mathew: Mater. High Temp., 2011, vol. 28, pp. 155–61.10.3184/096034011X13072941275843 ↗
29. B.K. Choudhary, K. Bhanu Sankara Rao, S.L. Mannan, and B.P. Kashyap: Mater. Sci. Technol., 1999, vol. 15, pp. 791–97.10.1179/026708399101506580 ↗
30. A.K. Roy, P. Kumar, and D. Maitra: Mater. Sci. Eng. A, 2009, vol. 499, pp. 379–86.10.1016/j.msea.2008.08.027 ↗
31. D.J. Dingley and D. McLean: Acta Metall., 1967, vol. 15, pp. 885–901.10.1016/0001-6160(67)90371-9 ↗
32. A.M. Garde, A.T. Santhanam, and R.E. Reed-Hill: Acta Metall. Mater., 1972, vol. 20, pp. 215–20.10.1016/0001-6160(72)90183-6 ↗
33. D.J. Michel, J. Moteff, and A.J. Lovell: Acta Metall., 1973, vol. 21, pp. 1269–77.10.1016/0001-6160(73)90168-5 ↗
34. J.G. Morris: Mater. Sci. Eng., 1974, vol. 13, pp. 101–08.10.1016/0025-5416(74)90177-3 ↗
35. E. Hornbogan: Trans. TMS-ASM, 1964, vol. 57, pp. 120–32.
36. J.W. Edington and R.E. Smallman: Acta Metall., 1964, vol. 12, pp. 1313–28.10.1016/0001-6160(64)90120-8 ↗
37. B.P. Kashyap, K. McTaggart, and K. Tangri: Philos. Mag., 1988, vol. 57, pp. 97–114.10.1080/01418618808204501 ↗
38. S. Okamato, D.K. Matlock, and G. Krauss: Scripta Metall., 1991, vol. 25, pp. 39–44.10.1016/0956-716X(91)90350-A ↗
39. P. Spatig, N. Baluc, and M. Victoria: Mater. Sci. Eng. A, 2001, vols. 309–310, pp. 425–29.10.1016/S0921-5093(00)01634-8 ↗
40. R. Bonade and P. Spatig: Mater. Sci. Eng. A, 2005, vols. 400–401, pp. 234–40.
41. G. Gottstein and A.S. Argon: Acta Metall. Mater., 1987, vol. 35, pp. 1261–71.10.1016/0001-6160(87)90007-1 ↗
42. U.F. Kocks: Mechanical Testing for Deformation Model Developmnent, R.W. Rohde and J.C. Swearengen, eds., ASTM STP 765, American Scociety for Testing and Materials, Philadelphia, PA, 1982, pp. 121–38.
43. H.J. Kleemola and M.A. Nieminen: Metall. Trans., 1974, vol. 5, pp. 1863–66.10.1007/BF02644152 ↗
44. Y. Tomita and K. Okabayashi: Metall. Trans. A., 1984, vol. 16A, pp. 2247–49.10.1007/BF02647108 ↗
45. X. Feaugas: Acta Mater., 1999, vol. 47, pp. 3617–32.10.1016/S1359-6454(99)00222-0 ↗
46. T. Takeuchi: Jpn. J. Appl. Phys., 1970, vol. 9, pp. 391–400.10.1143/JJAP.9.391 ↗
47. A. Matsuda: J. Jpn Inst. Metal., 1976, vol. 40, p. 270.10.2320/jinstmet1952.40.3_270 ↗
48. E.I. Samuel, B.K. Choudhary, and K. Bhanu Sankara Rao: Scripta Mater., 2002, vol. 46, pp. 507–12.10.1016/S1359-6462(02)00023-4 ↗
49. D. McLean: Mechanical Properties of Metals, R.E. Krieger Publishing Company, New York, NY, 1977, pp. 114–67.