Effects of Deformation Twinning on Energy Dissipation in High Rate Deformed Zirconium
Source abstract
Abstract
The posit that deformation twinning can result in energy storage is examined by measuring the temperature increase of zirconium during adiabatic compression at high strain rates and correlating the response with the resulting microstructure. After examining the underlying assumptions of homogeneous deformation via microscopy and numerical modeling, it is determined that the occurrence of twinning does not correlate with significant energy storage relative to dissipation, and the appearance of storage may be caused by inhomogeneity in the deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · High-pressure geophysics and materials · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. W.S. Farren, G.I. Taylor: Proc. R. Soc. London A, 1925, vol. 107, pp. 422–5110.1098/rspa.1925.0034 ↗
2. H. Quinney, G.I. Taylor: Proc. R. Soc. London A, 1937, vol. 163, pp. 157–8110.1098/rspa.1937.0217 ↗
3. M.B. Bever, D.L. Holt, and A.L. Titchener: Progr. Mater. Sci., 1973, vol. 1710.1016/0079-6425(73)90001-7 ↗
4. J.J. Mason, A.J. Rosakis, G. Ravichandran: Mech. Mater., 1994, vol. 17, pp. 135–4510.1016/0167-6636(94)90054-X ↗
5. J. Hodowany: Ph.D. Thesis, Graduate Aeronautical Laboratories, California Institute of Technology, Pasadena, CA, 1997
6. R. Kapoor, S. Nemat-Nasser: Mech. Mater., 1998, vol. 27, pp. 1–1210.1016/S0167-6636(97)00036-7 ↗
7. A.N. Stroh: Proc. R. Soc. London A, 1953, vol. 218, pp. 391–40010.1098/rspa.1953.0112 ↗
8. F.R.N. Nabarro: Theory of Crystal Dislocations, Oxford University Press, Oxford, United Kingdom, 1967
9. J.P. Hirth, J. Lothe: Theory of Dislocations, McGraw-Hill Inc., New York, NY, 1968
10. J.T. Moore, D. Kuhlman-Wilsdorf: 2nd Int. Conf. on the Strength of Metals and Alloys, American Society of Metals (ASM), Metals Park, OH, 1970, vol. 2, pp. 484–88
11. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1987, vol. 86, pp. 53–6610.1016/0025-5416(87)90442-3 ↗
12. G. Subhash, G. Ravichandran, B.J. Pletka: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1479–8710.1007/s11661-997-0210-7 ↗
13. D. Macdougall: Exp. Mech., 2000, vol. 40, pp. 298–30610.1007/BF02327503 ↗
14. E. Tenckhoff: ASTM Special Technical Publication (STP) 966, ASTM, Philadelphia, PA, 1988
15. J.W. Christian and S. Mahajan: Progr. Mater. Sci., 1995, vol. 39, pp. 1–15710.1016/0079-6425(94)00007-7 ↗
16. G.T. Gray: Twinning in Advanced Materials, Minerals Metals and Materials Society (TMS), Warrendale, PA, 1994, pp. 337–49
17. K.T. Ramesh: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 927–3510.1007/s11661-002-0162-x ↗
18. M.H. Yoo, J.R. Morris, K.M. Ho, S.R. Agnew: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 813–2210.1007/s11661-002-0150-1 ↗
19. E.J. Rapperport, C.S. Hartley: Trans. TMS-AIME, 1960, vol. 218, pp. 869–76
20. A. Akhtar: Acta Metall., 1973, vol. 21, pp. 1–1110.1016/0001-6160(73)90213-7 ↗
21. A. Akhtar: J. Nucl. Mater., 1973, vol. 47, pp. 79–8610.1016/0022-3115(73)90189-X ↗
22. R.J. McCabe, E.K. Cerrata, A. Misra, G.C. Kaschner, C.N. Tomé: Phil. Mag., 2006, vol. 86, pp. 3595–361110.1080/14786430600684500 ↗
23. E. Cerreta, G.T. Gray III: Metall. Mater. Trans. A, 2004, vol. 33A, pp. 1999–201110.1007/s11661-004-0149-x ↗
24. A.K. Aiyangar, B.W. Neuberger, P.G. Oberson, S. Ankem: Metall. Mater. Trans. A, 2006, vol. 36A, p. 637
25. H. Conrad: Progr. Mater. Sci., 1981, vol. 26, pp. 123–40310.1016/0079-6425(81)90001-3 ↗
26. S. Nemat-Nasser, W.G. Guo, J.Y. Cheng: Acta Mater., 1999, vol. 47, pp. 3705–2010.1016/S1359-6454(99)00203-7 ↗
27. M.A. Meyers, O. Vohringer, and V.A. Lubarda: Acta Metall., 2001, vol. 49, pp. 4025–3910.1016/S1359-6454(01)00300-7 ↗
28. G.C. Kaschner, G.T. Gray III: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1997–200310.1007/s11661-000-0227-7 ↗
29. M.P. Biget, G. Saada: J. Phys. III France, 1995, vol. 5, pp. 1833–4010.1051/jp3:1995219 ↗
30. D.O. Hobson: Trans. TMS-AIME, 1968, vol. 242, pp. 1105–10
31. M.G. Isayenkova and Y.A. Perlovich: Izv. Akad. Nauk SSSR. Metally, 1987, No. 3, pp. 152–55
32. M.G. Isayenkova, Y.A. Perlovich: Phys. Met. Metall., 1991, vol. 71, pp. 81–86
33. C.N. Tomé, P.J. Maudlin, R.A. Lebensohn, G.C. Kaschner: Acta Mater., 2001, vol. 49, pp. 3085–9610.1016/S1359-6454(01)00190-2 ↗
34. J. Hodowany, G. Ravichandran, A.J. Rosakis, P. Rosakis: Exp. Mech., 2000, vol. 40, pp. 112–2310.1007/BF02325036 ↗
35. Y. Rabin, D. Rittel: Exp. Mech., 2000, vol. 40, pp. 197–20210.1007/BF02325046 ↗
36. ATI Wah Chang: Allegheny Technologies, Allegheny, OR, 2005
37. G.T. Gray III: ASM Handbook, vol. 8, Mechanical Testing and Evaluation, ASM, Materials Park, OH, 2000
38. D. Rittel: Mech. Mater., 1999, vol. 31, pp. 131–3910.1016/S0167-6636(98)00063-5 ↗
39. Z. Li, J. Lambros: Int. J. Solid. Struct., 2001, vol. 38, pp. 3549–6210.1016/S0020-7683(00)00223-7 ↗
40. Z. Li, J. Lambros: Compos. Appl. Sci. Manuf., 2000, vol. 31A, pp. 537–4710.1016/S1359-835X(99)00102-5 ↗
41. T.W. Bjerke: Ph.D. Thesis, University of Delaware, Newark, DE, 2002
42. J.F. Bingert, T.A. Mason, G.C. Kaschner, P.J. Maudlin, G.T. Gray III: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 955–6310.1007/s11661-002-0165-7 ↗
43. G.C. Kaschner, C.N. Tome, I.J. Beyerlein, S.C. Vogel, D.W. Brown, R.J. McCabe: Acta Mater., 2006, vol. 54, pp. 2887–9610.1016/j.actamat.2006.02.036 ↗
44. G.I. Taylor: J. Inst. Met., 1938, vol. 62
45. C.N. Tomé, R.A. Lebensohn, U.F. Kocks: Acta Metall. Mater., 1991, vol. 39, p. 266710.1016/0956-7151(91)90083-D ↗
46. R.A. Lebensohn, C.N. Tomé: Acta Metall. Mater., 1993, vol. 41, pp. 2611–2410.1016/0956-7151(93)90130-K ↗
47. M.H. Yoo, J.K. Lee: Phil. Mag. A, 1991, vol. 63, pp. 987–100010.1080/01418619108213931 ↗