Coble, Orowan Strengthening, and Dislocation Climb Mechanisms in a Nb-Modified Zircaloy Cladding
Source abstract
Abstract
Biaxial creep tests on HANA-4 tubes, Nb-added Zircaloy-4 were conducted using internal pressurization of closed-end tubes to investigate the rate-controlling mechanisms over a range of hoop stresses, $$ 8.38 \times 10 - 5 E - 2.87 \times 10 - 3 E $$ , at three different temperatures 673 K, 723 K, and 773 K (400 °C, 450 °C, and 500 °C). The mechanistic creep parameters such as stress exponent (n) and activation energy (Q C) were then determined from steady-state creep rates. Based on the variance in stress exponent with respect to the applied stress, three regimes have been identified: a stress exponent close to 1 at low stresses that increased to 3 at the intermediate stresses, which became 4.5 at high stresses. An activation energy value of 226 kJ/mol was evaluated for the n = 3 and n = 4.5 regimes, which lies close to the activation energy for self-diffusion (Q L) in α-Zr alloys. Further, TEM analyses of crept microstructures and comparison of experimental results with standard models were undertaken to find out the rate-controlling mechanisms. Coble creep, climbing of dislocations to bypass β-Nb precipitates, and dynamic recovery by edge dislocation climb are proposed as the rate-controlling mechanisms in the n = 1, n = 3, and n = 4.5 regimes of HANA-4, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. K. Linga Murty and Indrajit Charit, Progress in Nuclear Energy 2006, vol. 48, pp. 325-359.10.1016/j.pnucene.2005.09.011 ↗
2. K.L. Murty and I. Charit, J Nucl Mater 2008, vol. 383, pp. 189-195.10.1016/j.jnucmat.2008.08.044 ↗
3. I. Charit and K.L. Murty, J Nucl Mater 2008, vol. 374, pp. 354-363.10.1016/j.jnucmat.2007.08.019 ↗
4. K.L. Murty, T Indian I Metals 2000, vol. 53, pp. 107-120.
5. Hyun-Gil Kim, Il-Hyun Kim, Byung-Kwan Choi, Jeong-Yong Park, Yong-Hwan Jeong and Kyu-Tae Kim, Corrosion Science 2010, vol. 52, pp. 3162-3167.10.1016/j.corsci.2010.05.014 ↗
6. Y. I. Jung, M. H. Lee, H. G. Kim, J. Y. Park and Y. H. Jeong, Journal of Alloys and Compounds 2009, vol. 479, pp. 423-426.10.1016/j.jallcom.2008.12.089 ↗
7. Jeong YH, Kim HG, Kim DJ, Choi BK and Kim JH, J Nucl Mater 2003, vol. 323, pp. 72-80.10.1016/j.jnucmat.2003.08.031 ↗
8. Jeong YH, Lee KO and Kim HG, J Nucl Mater 2002, vol. 302, pp. 9-19.10.1016/S0022-3115(02)00703-1 ↗
9. Jeong YH, Park S-Y, Lee M-H, Choi B-K, Baek J-H, Park J-Y, Kim J-H and Kim H-G, Journal of Nuclear Science and Technology 2006, vol. 43, pp. 977-983.10.1080/18811248.2006.9711185 ↗
10. K.L. Murty, Jom-J Min Met Mat S 2000, vol. 52, pp. 34-38.10.1007/s11837-000-0185-y ↗
11. K.L. Murty, Jom-J Min Met Mat S 1999, vol. 51, pp. 32-39.10.1007/s11837-999-0184-6 ↗
12. Y. Zhou, B. Devarajan and K.L. Murty, Nucl Eng Des 2004, vol. 228, pp. 3-13.10.1016/j.nucengdes.2003.06.013 ↗
13. K.L. Murty, J. Ravi and A. Wiratmo, Nucl Eng Des 1995, vol. 156, pp. 359-371.10.1016/0029-5493(94)00960-7 ↗
14. J.C. Britt, J. Ravi, Wiratmo, and K.L. Murty: Proceedings of the Sixth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors 1993, pp. 483–90.
15. W. R. Thorpe and I. O. Smith, J Nucl Mater 1978, vol. 75, pp. 209-219.10.1016/0022-3115(78)90001-6 ↗
16. A. Pahutová, J. $$ {{\overset{\lower0.5em\hbox{$\smash{\scriptscriptstyle\smile}$}}{\text{C}}}}{\text{adek}} $$, and V. $$ {{\overset{\lower0.5em\hbox{$\smash{\scriptscriptstyle\smile}$}}{\text{C}}}}$$erný: J Nucl Mater, 1976, vol. 61, pp. 285–96.
17. M. I. Alymov, E. N. Pirogov and L. L. Artyukhina, At Energy 1987, vol. 62, pp. 441-444.10.1007/BF01124108 ↗
18. K. Linga Murty, J. Ravi and Wiratmo, Nucl Eng Des 1995, vol. 156, pp. 359-371.10.1016/0029-5493(94)00960-7 ↗
19. J. Ravi and K.L. Murty: in Johannes Weertman Symposium: TMS Annual Meeting, R.J. Arsenault, D. Cole, H. Sizek, P. Liaw, G. Parameswaran, and G. Kostorz, eds., The Society, Anaheim, California, 1996, pp. 203–09.
20. K.L. Murty, Scripta Metallurgica 1973, vol. 7, pp. 899-903.10.1016/0036-9748(73)90138-5 ↗
21. T. A. Hayes and M. E. Kassner, Metall Mater Trans A 2006, vol. 37A, pp. 2389-2396.10.1007/BF02586213 ↗
22. Hayes T.A., Kassner ME and Rosen R.S., Metall and Mat Trans A 2002, vol. 33, pp. 337–343.10.1007/s11661-002-0095-4 ↗
23. J Weertman, Transactions of the ASM 1968, vol. 61, pp. 680-694.
24. E. Orowan: Symposium on Internal Stresses in Metals and Alloys, London, 1948, p 451.
25. J.W. Martin: Precipitation Hardening, Butterworth-Heinemann, Oxford, 1998.
26. S. Gollapudi, I. Charit and K.L. Murty, Acta Mater 2008, vol. 56, pp. 2406-2419.10.1016/j.actamat.2008.01.052 ↗
27. I. Charit and K.L. Murty, Mater Sci Forum 2007, vol. 539-543, pp. 3377-3382.10.4028/www.scientific.net/MSF.539-543.3377 ↗
28. H. Okamoto, Journal of Phase Equilibria 1992, vol. 13, p. 577.10.1007/BF02665776 ↗
29. R. Jerlerud and A. R. Massih, J Nucl Mater 2007, vol. 360, pp. 242-254.10.1016/j.jnucmat.2006.10.008 ↗
30. A. Guillermet: Zeitschrift fur Metailkunde 1991, vol. 82, pp. 478–87.
31. H. E. Rosinger and D. O. Northwood, J Nucl Mater 1979, vol. 79, pp. 170-179.10.1016/0022-3115(79)90444-6 ↗
32. V.S. Lyashenko, V.N. Bykon and L.V. Pavlinov, Fiz. metal. metalloved 1959, vol. 8, pp. 362-369.
33. R. L. Coble, J Appl Phys 1963, vol. 34, pp. 1679-1682.10.1063/1.1702656 ↗
34. J. Harper and J. E. Dorn, Acta Metallurgica 1957, vol. 5, pp. 654-665.10.1016/0001-6160(57)90112-8 ↗
35. Conyers Herring, J Appl Phys 1950, vol. 21, pp. 437-445.10.1063/1.1699681 ↗
36. F.R.N. Nabarro: The Physical Society, London, 1948.
37. K.L. Murty, Mater Sci Eng 1974, vol. 14, pp. 169-177.10.1016/0025-5416(74)90010-X ↗
38. J. Novotný, J. Fiala and J. Čadek, Acta Metallurgica 1985, vol. 33, pp. 905-911.10.1016/0001-6160(85)90115-4 ↗
39. B. Kombaiah and K. Linga Murty: Philos. Mag. 2015, vol. 95, pp. 1656–79.10.1080/14786435.2015.1042939 ↗
40. K. Vieregge, R. Willecke and C. Herzig, Le Journal de Physique Colloques 1990, vol. 51, pp. 691-696.10.1051/jphyscol:19901110 ↗
41. J.E. Bird, A.K. Mukherjee, and J.E. Dorn: in Quantitative relation between properties and microstructure, D.G. Brandon and A. Rosen, eds. Israel University Pressm, Haifa, Israel, 1969, pp 255–342.
42. K. Linga, Mater Sci Eng 1974, vol. 14, pp. 169-177.10.1016/0025-5416(74)90010-X ↗
43. J. Weertman, J Appl Phys 1957, vol. 28, pp. 1185-1189.10.1063/1.1722604 ↗
44. N.Q. Vo, C.H. Liebscher, M.J. S. Rawlings, M. Asta and D.C. Dunand, Acta Mater 2014, vol. 71, pp. 89-99.10.1016/j.actamat.2014.02.020 ↗
45. Emmanuelle A. Marquis and David C. Dunand, Scripta Mater 2002, vol. 47, pp. 503-508.10.1016/S1359-6462(02)00165-3 ↗
46. J. Rösler and E. Arzt, Acta Metallurgica 1988, vol. 36, pp. 1043-1051.10.1016/0001-6160(88)90158-7 ↗
47. E. Arzt and J. Rösler, Acta Metallurgica 1988, vol. 36, pp. 1053-1060.10.1016/0001-6160(88)90159-9 ↗
48. E. Arzt and M. F. Ashby, Scripta Metallurgica 1982, vol. 16, pp. 1285-1290.10.1016/0036-9748(82)90484-7 ↗
49. B.G. Clark, I.M. Robertson, L.M. Dougherty, D.C. Ahn and P. Sofronis, Journal of Materials Research 2005, vol. 20, pp. 1792-1801.10.1557/JMR.2005.0224 ↗
50. Arne Melander and Per Åke Persson, Acta Metallurgica 1978, vol. 26, pp. 267-278.10.1016/0001-6160(78)90127-X ↗
51. R. Lagneborg and B. Bergman, Metal Science 1976, vol. 10, pp. 20-28.10.1179/030634576790431462 ↗
52. J. Čadek: Creep in Metallic Materials, Elsevier Science Publishers B. V., Amsterdam, The Netharlands, 1988.
53. R. W. Weeks, S. R. Pati, M. F. Ashby and P. Barrand, Acta Metallurgica 1969, vol. 17, pp. 1403-1410.10.1016/0001-6160(69)90002-9 ↗
54. B. M. Morrow, R. W. Kozar, K. R. Anderson and M. J. Mills, Acta Mater 2013, vol. 61, pp. 4452-4460.10.1016/j.actamat.2013.04.014 ↗
55. G. B. Viswanathan, V. K. Vasudevan and M. J. Mills, Acta Mater 1999, vol. 47, pp. 1399-1411.10.1016/S1359-6454(99)00021-X ↗
56. F. R. N. Nabarro, Materials Science and Engineering: A 2004, vol. 387–389, pp. 659-664.10.1016/j.msea.2003.09.118 ↗
57. J. Weertman, J Appl Phys 1957, vol. 28, pp. 362-364.10.1063/1.1722747 ↗
58. J. Weertman: in Rate Processes in Plastic Deformation of Materials, A.K. Mukherjee and J.C.M. Li , eds, ASM, Cleveland, Ohio, 1972, pp. 315–336.
59. J Weertman, T Metall Soc Aime 1960, vol. 218, p. 207.
60. Bo Jansson and Arne Melander, Scripta Metallurgica 1978, vol. 12, pp. 497-498.10.1016/0036-9748(78)90194-1 ↗
61. P.G. Shewmon: Transformations in Metals, McGraw-Hill, New York, 1969, p. 312.
62. M. Ivermark, J. Robson, M. Preuss, and S.W. Dean, J. ASTM Int., 2010, vol. 7, p. 103011.10.1520/JAI103011 ↗
63. J. D. Robson, J Nucl Mater 2008, vol. 377, pp. 415-422.10.1016/j.jnucmat.2008.03.016 ↗
64. E. Nembach, Physica Status Solidi (a), 1983, vol. 78, pp. 571-581.10.1002/pssa.2210780223 ↗
65. J. Goldak, L. T. Lloyd and C. S. Barrett, Physical Review 1966, vol. 144, pp. 478-484.10.1103/PhysRev.144.478 ↗
66. Y.F. Bychkov, A. N. Rozanov and D. M. Skorov, The Soviet Journal of Atomic Energy 1957, vol. 2, pp. 171-175.10.1007/BF01832087 ↗