Quantitative Study of Microstructure-Dependent Thermal Conductivity in Mg-4Ce-xAl-0.5Mn Alloys
Source abstract
Abstract
The effect of microstructure on thermal conductivity was investigated for Mg-4Ce-xAl-0.5Mn (x = 0 to 6 wt pct) alloys produced by gravity casting and high-pressure die casting. The solidification microstructure of the alloys was quantitatively studied using CALculation of PHase Diagrams (CALPHAD) modeling and experimental characterization. The lattice volume of Mg solid solution was measured via X-ray diffraction (XRD) method. The results show that the thermal conductivity is influenced mostly by lattice volume, and, to a lesser extent, by intermetallic compounds. Also, thermal conductivity has a strong negative correlation with the concentration of total solute atoms. When the addition of Al is less than 3 wt pct, the thermal conductivity of die casting alloys with higher cooling rate and solute concentration is lower than that of gravity casting alloys. However, their thermal conductivities tend to be equal when the Al addition exceeds about 3 wt pct, as the concentration of solute atom is approaching the solid solubility limit. Two methods (structural model and Wiedemann–Franz law) were proposed and modified to predict their thermal conductivities, respectively. Both can provide a good prediction of thermal conductivity values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
2. M.K. Kulekci: Int. J. Adv. Manuf. Technol., 2008, vol. 39, pp. 851–65.10.1007/s00170-007-1279-2 ↗
3. X. Shi, D. Li, A.A. Luo, B. Hu, L. Li, X. Zeng, and W. Ding: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4788–99.10.1007/s11661-013-1799-3 ↗
4. A. Rudajevová, M. Staněk, and P. Lukáč: Mater. Sci. Eng. A, 2003, vol. 341, pp. 152–57.10.1016/S0921-5093(02)00233-2 ↗
5. A. Rudajevová, J. Kiehn, K.U. Kainer, B.L. Mordike, and P. Lukáč: Scr. Mater., 1999, vol. 40, pp. 57–62.10.1016/S1359-6462(98)00390-X ↗
6. C. Wang, Z. Cui, H. Liu, Y. Chen, W. Ding, and S. Xiao: Mater. Des., 2015, vol. 84, pp. 48–52.10.1016/j.matdes.2015.06.110 ↗
7. T. Ying, H. Chi, M. Zheng, Z. Li, and C. Uher: Acta Mater., 2014, vol. 80, pp. 288–95.10.1016/j.actamat.2014.07.063 ↗
8. C. Su, D. Li, A.A. Luo, T. Ying, and X. Zeng: J. Alloys Compd., 2018, vol. 747, pp. 431–37.10.1016/j.jallcom.2018.03.070 ↗
9. T.B. Massalski and H. Okamoto: Binary Alloys Phase Diagrams, 2nd ed., Springer, Berlin, 1990, pp. 574–84.
10. J. Zhang, Z. Leng, M. Zhang, J. Meng, and R. Wu: J. Alloys Compd., 2011, vol. 509, pp. 1069–78.10.1016/j.jallcom.2010.09.185 ↗
11. T. Rzychoń, A. Kiełbus, J. Cwajna, and J. Mizera: Mater. Charact., 2009, vol. 60, pp. 1107–13.10.1016/j.matchar.2009.05.014 ↗
12. S. Zhu, T. Abbott, M. Gibson, J. Nie, and M. Easton: Mater. Sci. Eng. A, 2016, vol. 656, pp. 343–38.10.1016/j.msea.2016.01.012 ↗
13. J.F. Wang, J. K. Carson, M. F. North, and D. J. Cleland: Int. J. Heat Mass Transfer, 2006, vol. 49, pp. 3075–83.10.1016/j.ijheatmasstransfer.2006.02.007 ↗
14. R.C. Progelhof, J.L. Throne, and R.R. Reutsch: Polym. Eng. Sci., 1976, vol. 16, pp. 615–25.10.1002/pen.760160905 ↗
15. E. Behrens: J. Compos. Mater., 1968, vol. 2, pp. 2–17.10.1177/002199836800200101 ↗
16. T.H. Bauer: Int. J. Heat Mass Transfer, 1993, vol. 36, pp. 4181–91.10.1016/0017-9310(93)90080-P ↗
17. J. K. Carson and J. P. Sekhon: Int. Commun. Heat Mass Transfer, 2010, vol. 37, pp. 1226–29.10.1016/j.icheatmasstransfer.2010.07.024 ↗
18. F. Stadler, H. Antrekowitsch, W. Fragner, H. Kaufmann, E.R. Pinatel, and P.J. Uggowitzer: Mater. Sci. Eng. A, 2013, vol. 560, pp. 481–91.10.1016/j.msea.2012.09.093 ↗
19. J.K. Chen, H.Y. Hung, F. Wang, and K. Tang: J. Mater. Sci., 2015, vol. 50, pp. 5630–39.10.1007/s10853-015-9115-9 ↗
20. Powell RW: Int. J. Heat Mass Transfer, 1965, vol. 8, pp. 1033–45.10.1016/0017-9310(65)90086-4 ↗
21. C. Uher: Thermal Conductivity—Theory, Properties and Applications, Kluwer Academic/Plenum Publishers, New York, 2004, pp. 21–91.10.1007/0-387-26017-X_2 ↗
22. Y.S. Touloukiana and E.H. Buyco: Thermophysical Properties of Matter, Plenum Press, New York, 1970, pp. 124–127.
23. A. Lindemann, J. Schmidt, M. Todte, and T. Zeuner: Thermochim. Acta, 2002, vol. 382, pp. 269–75.10.1016/S0040-6031(01)00752-3 ↗
24. Alan A. Luo: CALPHAD, 2015, vol. 50, pp. 6–22.10.1016/j.calphad.2015.04.002 ↗
25. Renhai Shi and Alan A. Luo: CALPHAD, 2018, vol. 62, pp. 1–17.10.1016/j.calphad.2018.04.009 ↗
26. J. Wang, R. Liao, L. Wang, Y. Wu, Z. Cao, and L. Wang: J. Alloys Compd., 2009, vol. 477, pp. 341–45.10.1016/j.jallcom.2008.09.143 ↗
27. W. Sun, X. Shi, E. Cinkilic, and A. A. Luo: J. Mater. Sci., 2016, vol. 51, pp. 6287–94.10.1007/s10853-016-9925-4 ↗
28. J. Yang: Thermal Conductivity—Theory, Properties and Applications, Kluwer Academic/Plenum Publishers, New York, 2004, pp. 1–20.
29. J. Peng, L. Zhong, Y. Wang, Y. Lu, and F. Pan: Mater. Des., 2015, vol. 87, pp. 914–19.10.1016/j.matdes.2015.08.043 ↗
30. P. G. Klemens and R. K. Williams: Int. Met. Rev., 1986, vol. 31, pp. 197–215.10.1179/095066086790324294 ↗
31. J. Yuan, K. Zhang, X. Zhang, X. Li, T. Li, Y. Li, M. Ma, and G. Shi: J. Alloys Compd., 2013, vol. 578, pp. 32–36.10.1016/j.jallcom.2013.03.184 ↗
32. A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk: Metall. Mater. Trans., 2009, vol. 40, pp. 2435–2446.10.1007/s11661-009-9917-y ↗
33. M.J. Aziz: J. Appl. Phys., 1982, vol. 53, pp. 1158–68.10.1063/1.329867 ↗
34. J.C. Maxwell: A Treatise on Electricity and Magnetism, 3rd ed., Dover Publications Inc., New York, 1954, Chapter 9.
35. J. Wang, J.K. Carson, M.F. North, and D.J. Cleland: Int. J. Heat Mass Transfer, 2008, vol. 51, pp. 2389–97.10.1016/j.ijheatmasstransfer.2007.08.028 ↗
36. R. Landauer: J. Appl. Phys., 1952, vol. 23, pp. 779–84.10.1063/1.1702301 ↗
37. J. Helsing and G. Grimvall: J. Appl. Phys., 1991, vol. 70, pp. 1198–1206.10.1063/1.349573 ↗
38. R. L. Hamilton and O. K. Crosser: Ind. Eng. Chem. Fundamen., 1962, vol. 1, pp. 187–91.10.1021/i160003a005 ↗
39. J.-B. Vaney, A. Piarristeguy, V. Ohorodniichuck, O. Ferry, A. Pradel, E. Alleno, J. Monnier, E. B. Lopes, A. P. Gonçalves, G. Delaizir, C. Candolfi, A. Dauscher, and B. Lenoir: J. Mater. Chem. C, 2015, vol. 3, pp. 11090–98.10.1039/C5TC02087E ↗
40. H.C. Pan, F.S. Pan, R.M. Yang, J. Peng, C.Y. Zhao, J. She, Z.Y. Gao, and A.T. Tang: J. Mater. Sci., 2014, vol. 49, pp. 3107–24.10.1007/s10853-013-8012-3 ↗
41. Y.S. Touloukian: Thermophysical Properties of Matter, Plenum Press, New York, 1970, pp. 1310–17.
42. H. Pan, F. Pan, X. Wang, J. Peng, J. Gou, J. She, and A. Tang: Int. J. Thermophys., 2013, vol. 34, pp. 1336–46.10.1007/s10765-013-1490-3 ↗
43. R.N. Lumley, N. Deeva, R. Larsen, J. Gembarovic, and J. Freeman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1074–86.10.1007/s11661-012-1443-7 ↗
44. X. Zheng, D.G. Cahill, P. Krasnochtchekov, R.S. Averback, and J.-C. Zhao: Acta Mater., 2007, vol. 55, pp. 5177–85.10.1016/j.actamat.2007.05.037 ↗