journal article·2017-07Open access

Modeling of Ti-W Solidification Microstructures Under Additive Manufacturing Conditions

Matthew R. Rolchigo, Michael Y. Mendoza, Peyman Samimi, David A. Brice, Brian Martin, Peter C. Collins, Richard LeSar

Abstract

Abstract Additive manufacturing (AM) processes have many benefits for the fabrication of alloy parts, including the potential for greater microstructural control and targeted properties than traditional metallurgy processes. To accelerate utilization of this process to produce such parts, an effective computational modeling approach to identify the relationships between material and process parameters, microstructure, and part properties is essential. Development of such a model requires accounting for the many factors in play during this process, including laser absorption, material addition and melting, fluid flow, various modes of heat transport, and solidification. In this paper, we start with a more modest goal, to create a multiscale model for a specific AM process, Laser Engineered Net Shaping (LENS™), which couples a continuum-level description of a simplified beam melting problem (coupling heat absorption, heat transport, and fluid flow) with a Lattice Boltzmann-cellular automata (LB-CA) microscale model of combined fluid flow, solute transport, and solidification. We apply this model to a binary Ti-5.5 wt pct W alloy and compare calculated quantities, such as dendrite arm spacing, with experimental results reported in a companion paper.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (99)

Show source-provided references
1. P.C. Collins, D.A. Brice, P. Samimi, I. Ghamarian, and H.L. Fraser: Annu. Rev. Mater. Res., 2016, vol. 46, pp. 63-91.10.1146/annurev-matsci-070115-031816 ↗
2. L.E. Murr, S.M. Gaytan, F. Medina, E. Martinez, J.L. Martinez, D.H. Hernandez, B.I. Machado, D.A. Ramirez, and R.B. Wicker: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1861-68.10.1016/j.msea.2009.11.015 ↗
3. M.L. Griffith, M.T. Ensz, J.D. Piskar, C.V. Robino, J.A. Brooks, J.A. Philliber, J.E. Smugeresky, and W.H. Hofmeister: Mater. Res. Soc. Symp. Proc., 2000, vol. 625, pp. 9-20.10.1557/PROC-625-9 ↗
4. S.A. Khanoki and D. Pasini: J. Biomech Eng. Trans. Asme, 2012, vol. 134, p. 10.
5. Dejian Liu, John C. Lippold, Jia Li, Stan R. Rohklin, Justin Vollbrecht, Richard Grylls: Metall. Meter. Trans. A, 2014, vol. 45A, pp. 4454-69.10.1007/s11661-014-2397-8 ↗
6. Gerd Lutjering and James C. Williams: Titanium, 2nd ed., Springer-Verlag Berlin Heidelberg, 2007.
7. Carolin Körner, Elham Attar, and Peter Heinl: J. Mater. Process. Technol., 2011, vol. 211, pp. 978-87.10.1016/j.jmatprotec.2010.12.016 ↗
8. William Hofmeister, Melissa Wert, John Smugeresky, Joel A. Philiber, Michelle Griffith, and Mark Ensz: JOM-e, 1999, vol. 51, pp. 1–6.
9. Riqing Ye, John E. Smugeresky, Baolong Zheng, Yizhang Zhou, and Enrique J. Lavernia: Mater. Sci. Eng. A, 2006, vol. 428, pp. 47-53.10.1016/j.msea.2006.04.079 ↗
10. Liang Wang and Sergio Felicelli: Mater. Sci. Eng. A, 2006, vol. 435-436, pp. 625-31.10.1016/j.msea.2006.07.087 ↗
11. L Wang, S. Felicelli, Y. Gooroochurn, P.T. Wang, and M.F. Horstemeyer: Mater. Sci. Eng. A, 2008, vol. 474, pp. 148-56.10.1016/j.msea.2007.04.119 ↗
12. Ahmed Hussein, Liang Hao, Chunze Yan, and Richard Everson: Mater. Des., 2013, vol. 52, pp. 638-47.10.1016/j.matdes.2013.05.070 ↗
13. I.A. Roberts, C.J. Wang, R. Esterlein, M. Stanford, and D.J. Mynors: Int. J. Mach. Tool. Manu., 2009, vol. 49, pp. 916-23.10.1016/j.ijmachtools.2009.07.004 ↗
14. J. Mazumder: Opt. Eng., 1991, vol. 38, issue 8, pp. 1208-1219.10.1117/12.55899 ↗
15. Saad A. Khairallah, Andrew T. Anderson, Alexander Rubenchik, and Wayne E. King: Acta Mater., 2016, vol. 108, pp. 36-45.10.1016/j.actamat.2016.02.014 ↗
16. Matthias Markl and Carolin Körner: Annu. Rev. Mater. Res., 2016, vol. 46, pp. 93-123.10.1146/annurev-matsci-070115-032158 ↗
17. M.C. Tsai and S. Kou: Int. J. Numer. Meth. Fl., 1989, vol. 9, issue 12, pp. 1503-1516.10.1002/fld.1650091206 ↗
18. S. Kou and Y.H. Wang: Weld. J., 1986, vol. 65, issue 3, pp. S63-S70.
19. C.L. Chan, J. Mazumder, and M.M. Chen: J. Appl. Phys., 1988, vol. 64, issue 11, pp. 6166-6174.10.1063/1.342121 ↗
20. L.X. Yang, X.F. Peng, and B.X. Wang: Int. J. Heat Mass Trans., 2001, vol. 44, pp. 4465-4473.10.1016/S0017-9310(01)00086-2 ↗
21. K. Mundra, T. DebRoy, and K.M. Kelkar: Numer. Heat Tr A-Appl., 1996, vol. 29, issue 2, pp. 115-129.10.1080/10407789608913782 ↗
22. Mahdi Jamshidinia, Fanrong Kong, and Radovan Kovacevic: J. Manuf. Sci. E-T ASME, 2013, vol. 135, p. 061010.10.1115/1.4025746 ↗
23. M. Picasso and A.F.A. Hoadley: Int. J. Numer. Method H., 1994, vol. 4, pp. 61-83.10.1108/EUM0000000004031 ↗
24. A.F.A Hoadley and M. Rappaz: Metall. Trans. B, 1992, vol. 23, issue 5, pp. 631-642.
25. He, X. and J. Mazumder: J. Appl. Phys., 2007, vol. 101, p. 053113.10.1063/1.2710780 ↗
26. H.L. Wei, J. Mazumder, and T. DebRoy: Sci. Rep., 2015, vol. 5:16446.10.1038/srep16446 ↗
27. Ranadip Acharya, Rohan Bansal, Justin J. Gambone, and Suman Das: Metall. Mater. Trans. B, 2014, vol. 45, issue 6, pp. 2247-61.10.1007/s11663-014-0117-9 ↗
28. Simon Morville, Muriel Carin, Partice Peyre, Myriam Gharbi, Denis Carron, Philippe Le Masson, and Remy Fabbro: J. Laser Appl., 2012, vol. 24, pp. 1–3.10.2351/1.4726445 ↗
29. Shiyi Chen and Gary D. Doolen: Annu. Rev. Fluid Mech., 1998, vol. 30, pp. 329-64.10.1146/annurev.fluid.30.1.329 ↗
30. Qing Liu and Ya-Ling He: Physica A, 2015, vol. 438, pp. 94-106.10.1016/j.physa.2015.06.018 ↗
31. Dipankar Chatterjee and Suman Chakraborty: Phys. Lett. A, 2006, vol. 351, pp. 359-67.10.1016/j.physleta.2005.11.014 ↗
32. El Alami Semma, Mohammed Ganaoui, and Rachid Bennacer: C. R. Mec., 2007, vol. 335, pp. 295-303.10.1016/j.crme.2007.05.015 ↗
33. Mohsen Eshraghi and Sergio D. Felicelli: Int. J. Heat Mass., 2012, vol. 55, pp. 2420-28.10.1016/j.ijheatmasstransfer.2012.01.018 ↗
34. Carolin Körner, Thomas Pohl, Ulrich Rude, Nils Thurey, Thomas Zeiser: Numerical Solution of Partial Differential Equations on Parallel Computers, A.M. Bruaset and A. Tveito, Editors. 2006, Springer, Berlin. pp. 439–66.
35. Jelinek B, Eshraghi M, Felicelli S, Peters JF. Large-scale parallel lattice Boltzmann–cellular automaton model of two-dimensional dendritic growth. Computer Physics Communications. 2014 Mar 31;185(3):939-47.10.1016/j.cpc.2013.09.013 ↗
36. Carolin Koerner, Andreas Bauereiss, Elham Attar: Modell. Simul. Mater. Sci. Eng., 2013, vol. 21, p. 55.
37. Anderson, T.D., J.N. DuPont, and T. DebRoy, Origin of stray grain formation in single-crystal superalloy weld pools from heat transfer and fluid flow modeling. Acta Mater., 2010. 58(4): p. 1441-1454.10.1016/j.actamat.2009.10.051 ↗
38. Weiping Liu and J.N. DuPont: Acta Mater., 2004, vol. 52, issue 16, pp. 4833-4847.
39. Chunlei Qiu, Chinnapat Panwisawas, Mark Ward, Hector C. Basoalto, Jeffery W. Brooks, Moataz M. Attallah: Acta Mater., 2015, vol. 96, pp. 72-79.10.1016/j.actamat.2015.06.004 ↗
40. Ranadip Acharya, Rohan Bansal, Justin J. Gambone, and Suman Das: Metall. Mater. Trans. B, 2014, vol. 45, issue 6, pp. 2279-2290.10.1007/s11663-014-0183-z ↗
41. Srikanth Bontha, Nathan W. Klingbeil, Pamela A. Kobryn, and Hamish L. Fraser: J. Mater. Process. Technol., 2006 vol. 178, pp. 135-42.10.1016/j.jmatprotec.2006.03.155 ↗
42. Srikanth Bontha, Nathan W. Klingbeil, Pamela A. Kobryn, and Hamish L. Fraser: Mater. Sci. Eng. A, 2009, vol. 513-14, pp. 311-18.10.1016/j.msea.2009.02.019 ↗
43. N.W. Klingbeil, S. Bontha, C.J. Brown, D.R. Gaddam, P.A. Kobryn, H.L. Fraser, and J.W. Sears: DTIC Document, 2004.
44. M. Rappaz and Ch.-A. Gandin: Acta Metall. Et Mater., 1993, vol. 41, issue 2, pp. 345-360.
45. Abha Rai, Matthias Markl, Carolin Körner: Comput. Mater. Sci., 2016, vol. 124, pp. 37-48.10.1016/j.commatsci.2016.07.005 ↗
46. H. Yin and S.D. Felicelli: Acta Mater., 2010, vol. 58, pp. 1455-65.10.1016/j.actamat.2009.10.053 ↗
47. L. Beltran-Sanchez and D.M. Stefanescu: Metall. Mater. Trans. A, 2003, vol. 34, pp. 367-82.10.1007/s11661-003-0338-z ↗
48. M. Nakagawa, Y. Natsume, and K. Ohsasa: Isij Int., 2006, vol. 46, pp. 909-13.10.2355/isijinternational.46.909 ↗
49. M.F. Zhu and D.M. Stefanescu: Acta Mater., 2007, vol. 55, pp. 1741-55.10.1016/j.actamat.2006.10.037 ↗
50. Rui Chen, Qingyan Xu, and Baicheng Liu: J. Mater. Sci. Technol., 2014, vol. 30, pp. 1311-20.10.1016/j.jmst.2014.06.006 ↗
51. Rui Chen, Qingyan Xu, and Baicheng Liu: Comput. Mater. Sci., 2015, vol. 105, pp. 90-100.10.1016/j.commatsci.2015.04.035 ↗
52. Dongke Sun, Mingfang Zhu, Shiyan Pan, Dierk Raabe: Acta Mater., 2009, vol. 57, pp. 1755-67.10.1016/j.actamat.2008.12.019 ↗
53. Mingfang Zhu, Dongke Sun, Shiyan Pan, Qingyu Zhang, Dierk Rabbe: Modell. Simul. Mater. Sci. Eng., 2014, vol. 22. p. 15.
54. Mohsen Eshraghi, Sergio D. Felicelli, and Bohumir Jelinek: J. Cryst. Growth, 2012, vol. 354, pp. 129-34.10.1016/j.jcrysgro.2012.06.002 ↗
55. H. Yin, S.D. Felicelli, and L. Wang: Acta Mater., 2011, vol. 59, pp. 3124-36.10.1016/j.actamat.2011.01.052 ↗
56. D.K. Sun, M.F. Zhu, T. Dai, W.S. Cao, S.L. Chen, D. Raabe, C.P. Hong: Int. J. Cast Met. Res., 2011, vol. 24, pp. 177-83.10.1179/136404611X13001912813988 ↗
57. Ming-Fang Zhu, Ting Dai, Sung-Yoon Lee, Chun-Pyo Hong: Comput. Math. Appl., 2008, vol. 55, pp. 1620-28.10.1016/j.camwa.2007.08.023 ↗
58. Mohsen Eshraghi, Bohumir Jelinek, and Sergio D. Felicelli: Jom, 2015, vol. 67, pp. 1786-92.10.1007/s11837-015-1446-0 ↗
59. M. Marek: Physica D, 2013, vol. 253, pp. 73-84.10.1016/j.physd.2013.03.005 ↗
60. W. Wang, P.D. Lee, and M. McLean: Acta Mater., 2003, vol. 51, pp. 2971-87.10.1016/S1359-6454(03)00110-1 ↗
61. Xiaohong Zhan, Yanhong Wei, and Zhino Dong: J. Mater. Process. Technol., 2008, vol. 208, pp. 1-8.10.1016/j.jmatprotec.2007.12.130 ↗
62. Wenda Tan and Yung C. Shin: Comp. Mater. Sci., 2015, vol. 98, pp. 446-458.10.1016/j.commatsci.2014.10.063 ↗
63. M.Y. Mendoza, P. Samimi, D.A. Brice, B.W. Martin, M.R. Rolchigo, R. LeSar, and P.C. Collins: Metall. Mater. Trans. A, 2017, DOI:10.1007/s11661-017-4117-7.10.1007/s11661-017-4117-7 ↗
64. W. Kurz and D.J. Fischer: Fundamentals of Solidification, 3rd ed., Trans Tech Publications Ltd, Aedermannsdorf, Switzerland, 1992.
65. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Taylor and Francis Group, Boca Raton, FL, 2004.
66. S. Jonsson, S: Ti-W Phase Diagram, ASM Alloy Phase Diagrams Database, P. Villars, editor-in-chief, H. Okamoto and K. Cenzual, section editors; http://asminternational.org, ASM International, Materials Park, OH, 2016.
67. M.C. Flemmings: Metall. Trans., 1974, vol. 5, pp. 2121-34.10.1007/BF02643923 ↗
68. S. Katayama and A. Matsunawa: International Congress on Applications of Lasers & Electro-Optics (ICALEO), 1984, vol. 44, pp. 60-67.
69. M.J. Bermingham, D. Kent, H. Zhan, D.H. StJohn, M.S. Dargusch: Acta Mater., 2015, vol. 91, pp. 289-303.10.1016/j.actamat.2015.03.035 ↗
70. T. Vilaro, C. Colin, J.D. Bartout: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3190-99.10.1007/s11661-011-0731-y ↗
71. Qiu C, Ravi GA, Dance C, Ranson A, Dilworth S, Attallah MM. Fabrication of large Ti–6Al–4V structures by direct laser deposition. Journal of Alloys and Compounds. 2015 Apr 25;629:351-61.10.1016/j.jallcom.2014.12.234 ↗
72. Matthias Markl, Regina Ammer, Ulrich Rude, Carolin Korner: Int. J. Adv. Des. Manuf. Technol., 2015, vol. 78, pp. 239-47.10.1007/s00170-014-6594-9 ↗
73. Saad A. Khairallah and Andy Anderson: J. Mater. Process. Technol., 2014, vol. 214, pp. 2627-36.10.1016/j.jmatprotec.2014.06.001 ↗
74. F.J. Gurtler, M. Karg, K.H. Leitz, M. Schmidt: Phys. Procedia, 2013, vol. 41, pp. 881-86.10.1016/j.phpro.2013.03.162 ↗
75. Levich, V.G.E., Physicochemical Hydrodynamics. 1962, Englewood Cliffs: Prentice-Hall.
76. Sauro Succi: The Lattice Boltzmann Equation: For Fluid Dynamics and Beyond, Oxford University Press, New York N.Y., 2001.10.1093/oso/9780198503989.001.0001 ↗
77. Xhaoli Guo, Baochang Shi, Chuguang Xheng: Int. J. Numer. Methods Fluids, 2002, vol. 39, pp. 325-42.10.1002/fld.337 ↗
78. C.S. Nor Azwadi and S. Syahrullail: WSEAS Trans. Math., 2009, vol. 8, pp. 561-71.
79. Suman Chakraborty and Dipankar Chatterjee: J. Fluid Mech., 2007, vol. 592, pp. 155-75.10.1017/S0022112007008555 ↗
80. Xiaoyi He and Li-Shi Luo: J. Stat. Phys., 1997, vol. 88, issue 3-4: pp. 927-944.10.1023/B:JOSS.0000015179.12689.e4 ↗
81. Robert S. Maier, Robert S. Bernard, and Daryl W. Grunau: Phys. Fluids, 1996, vol. 8, issue 7, pp. 1788-1801.10.1063/1.868961 ↗
82. Zhou, J.G.: Int. J. Numer. Meth. Fl, 2009, vol. 61, pp. 848-863.10.1002/fld.1978 ↗
83. X. He, S. Chen, and G.D. Doolen: J. Comput. Phys., 1998, vol. 146, pp. 282-300.10.1006/jcph.1998.6057 ↗
84. B. Trouette: Comput. Math. Appl., 2013, vol. 66, pp. 1360-71.10.1016/j.camwa.2013.07.024 ↗
85. G. Barrios, R. Rechtman, J. Rojas, and R. Tovar: J. Fluid Mech., 2005, vol. 522, pp. 91-100.10.1017/S0022112004001983 ↗
86. Palmer, B. J., & Rector, D. R. (2000). Lattice Boltzmann algorithm for simulating thermal flow in compressible fluids. J. Comput. Phys., 161(1), 1–20.10.1006/jcph.2000.6425 ↗
87. Peter Galenko: Phys. Rev. B, 2002, vol. 65, pp. 145.10.1103/PhysRevB.65.144103 ↗
88. Lazaro Beltran-Sanchez and Doru M. Stefanescu: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2471-85.10.1007/s11661-006-0227-3 ↗
89. W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall., 1986, vol. 34, pp. 823-30.10.1016/0001-6160(86)90056-8 ↗
90. H.B. Dong and P.D. Lee: Acta Mater., 2005, vol. 53, pp. 659-68.10.1016/j.actamat.2004.10.019 ↗
91. Boettinger, W.J.: Mater. Sci. Eng., 1988, 98:123–130.10.1016/0025-5416(88)90140-1 ↗
92. M. Grujicic, G. Cao, and R.S. Figliola: Appl. Surf. Sci., 2001, vol. 183, pp. 43-57.10.1016/S0169-4332(01)00553-0 ↗
93. Amrita Basak and Suman Das: Annu. Rev. Mater. Res., 2016, vol. 46, pp. 125-49.10.1146/annurev-matsci-070115-031728 ↗
94. P.C. Collins, C.V. Haden, I. Ghamarian, B.J. Hayes, T. Ales, G. Penso, V. Dixit, G. Harlow: Jom, 2014, vol. 66, pp. 1299-1309.10.1007/s11837-014-1007-y ↗
95. Iida, T., and Guthrie, I.L.: The Physical Properties of Liquid Metals, Oxford University Press, New York, 1988.
96. L. Battezzati and A.L. Greer: Acta Metall., 1989, vol. 37, pp. 1791-1802.10.1016/0001-6160(89)90064-3 ↗
97. Paul-Francois Paradis, Takehiko Ishikawa, Ryuici Fujii, Shinchi Yoda, Tsukuba Ibaraki: Heat Tran. Asian Res., 2006, vol. 35, pp. 152-6470.10.1002/htj.20101 ↗
98. P. Kubichek and B. Vozniakova: Radioisotope Application in Metallurgy, 1982, vol. 16, pp. 231-35.
99. Shadab Anwar, Danny Thorne Jr., and Michael C. Sukop: Vadose Zone J., 2013, vol. 12, pp. 1539–1663.10.2136/vzj2012.0192 ↗