journal article·2017-01Open access

Evolution of Grain Boundary Precipitates in an Al-Cu-Li Alloy During Aging

Noémie Ott, Shravan K. Kairy, Yuanming Yan, Nick Birbilis

Abstract

The grain boundary microstructure of Al-Cu-Li alloy AA2050 was investigated for different isothermal aging times to rationalize intergranular corrosion (IGC) characteristics. In the underaged condition, the dominant grain boundary precipitates are fine T1 (Al2CuLi). Extended aging revealed that grain boundaries were decorated by large T1 precipitates and S′ phase (Al2CuMg), with S′ growth not dimensionally constrained. Such a transition in the precipitate type at grain boundaries is a unique feature of the Al-Cu-Li system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. E.A. Starke: in: N.E. Prasad, A.A. Gokhale, R.J.H. Wanhill (Eds.): Aluminum-Lithium Alloys, Butterworth-Heinemann, Boston, 2014, pp. 3–26.10.1016/B978-0-12-401698-9.00001-X ↗
2. R.J. Rioja and J. Liu: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3325-3337.10.1007/s11661-012-1155-z ↗
3. T. Dursun and C. Soutis: Mater. Des., 2014, vol. 56, pp. 862–71.10.1016/j.matdes.2013.12.002 ↗
4. P.S. Chen, A.K. Kuruvilla, T.W. Malone and W.P. Stanton: J. Mater. Eng. Perform., 1998, vol. 7, pp. 682–90.10.1361/105994998770347576 ↗
5. N.E. Prasad and T.R. Ramachandran in: N.E. Prasad, A.A. Gokhale, R.J.H. Wanhill (Eds.): Aluminum-lithium Alloys, Butterworth-Heinemann, Boston, 2014, pp. 61–97.10.1016/B978-0-12-401698-9.00003-3 ↗
6. M. Murayama and K. Hono: Scripta Mater., 2001, vol. 44, pp. 701–06.10.1016/S1359-6462(00)00651-5 ↗
7. V. Araullo-Peters, B. Gault, F. de Geuser, A. Deschamps and J.M. Cairney: Acta Mater., 2014, vol. 66, pp. 199–20810.1016/j.actamat.2013.12.001 ↗
8. P. Donnadieu, Y. Shao, F. de Geuser, G.A. Botton, S. Lazar, M. Cheynet, M. de Boissieu and A. Deschamps: Acta Mater., 2011, vol. 59, pp. 462–7210.1016/j.actamat.2010.09.044 ↗
9. W.A. Cassada, G.J. Shiflet and E.A. Starke: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 287–97.10.1007/BF02656798 ↗
10. S.C. Wang and M.J. Starink: Inter. Mater. Rev., 2005, vol. 50, pp. 193–215.10.1179/174328005X14357 ↗
11. R. Yoshimura, T.J. Konno, E. Abe and K. Hiraga: Acta Mater., 2003, vol. 51, pp. 4251–66.10.1016/S1359-6454(03)00253-2 ↗
12. C. Giummarra, R.J. Rioja, G.H. Bray, P.E. Magnusen and J.P. Moran: in Aluminium alloys—their physical and mechanical properties’, J. Hirsch., B. Skrotzki and G. Gottstein, eds., Wiley-VCH GmbH & Co.KGaA, Weinheim, 2008, vol 1, pp. 176–88.
13. N.J.H. Holroyd, G.M. Scamans, R.C. Newman and A.K. Vasudevan, in: N.E. Prasad, A.A. Gokhale, R.J.H. Wanhill (Eds.): Aluminum–Lithium Alloys, Butterworth-Heinemann, Boston, 2014, pp. 457–500.10.1016/B978-0-12-401698-9.00014-8 ↗
14. S.C. Wang and M.J. Starink: Acta Mater., 2007, vol. 55, pp. 933–41.10.1016/j.actamat.2006.09.015 ↗
15. S.P. Ringer, K. Hono, I.J. Polmear and T. Sakurai: Acta Mater. 1996, vol. 44, pp. 1883–98.10.1016/1359-6454(95)00314-2 ↗
16. V. Radmilovic, G. Thomas, G.J. Shiflet and E.A. Starke: Scripta Metall., 1989, vol. 23, pp. 1141–46.10.1016/0036-9748(89)90315-3 ↗
17. V. Radmilovic, R. Kilaas, U. Dahmen and G.J. Shiflet: Acta Mater., 1999, vol. 47, pp. 3987–97.10.1016/S1359-6454(99)00259-1 ↗
18. A.K. Gupta, P. Gaunt and M.C. Chaturvedi: Philos. Mag. A: Phys. Condens. Matter. Struct. Defects Mech. Prop., 1987, vol. 55, pp. 375–87.10.1080/01418618708209875 ↗
19. A. Charai, T. Walther, C. Alfonso, A.M. Zahra and C.Y. Zahra: Acta Mater., 2000, vol. 48, pp. 2751–64.10.1016/S1359-6454(99)00422-X ↗
20. J.M. Silcock and T.J. Heal: Acta Crystallogr., 1956, vol. 9, pp. 680.10.1107/S0365110X56001820 ↗
21. A. Garg and J.M. Howe: Acta Metall. Mater., 1991, vol. 39, pp. 1925-1937.10.1016/0956-7151(91)90161-S ↗
22. J.M. Chabala, R. Levi-Setti, K.K. Soni, D.B. Williams and D.E. Newbury: Appl. Surf. Sci., 1991, vol. 51, pp. 185–92.10.1016/0169-4332(91)90401-5 ↗
23. D. Tsivoulas and J.D. Robson: Acta Mater., 2015, vol. 93, pp. 73-86.10.1016/j.actamat.2015.03.057 ↗
24. T. Dorin, A. Deschamps, F. de Geuser, and C. Sigli: Acta Mater., 2014, vol. 75, pp. 134–46.10.1016/j.actamat.2014.04.046 ↗
25. B. Decreus, A. Deschamps, P. Donnadieu and J.C. Ehrström: Mater. Sci. Eng. A, 2013, vol. 586, pp. 418–27.10.1016/j.msea.2013.06.075 ↗
26. J-F. Li, N. Birbilis, D-Y. Liu, Y-L. Chen, X-H. Zhang and C. Cai, Corros. Sci., 2016, vol. 105, pp. 44–57.10.1016/j.corsci.2016.01.001 ↗
27. N. Ott, Y. Yan, S. Ramamurthy, S. Kairy and N. Birbilis: Scripta Mater., 2016, vol.119, pp. 17–20.10.1016/j.scriptamat.2016.03.021 ↗
28. C. Henon and S. Rouault: In Proceedings ICAA13: 13th International Conference on Aluminum Alloys, Wiley, New York, 2012. pp. 431–36.10.1002/9781118495292.ch63 ↗
29. B.J. Connolly and J.R. Scully: Scripta Mater., 2000, vol. 42, pp. 1039–45.10.1016/S1359-6462(00)00333-X ↗
30. M.E. Parker and R.G. Kelly: Corrosion, 2016. Vol.72, pp. 1342–50.10.5006/2103 ↗
31. R.J. Rioja and E.A. Ludwiczak: Identification of metastable phases in Al-Cu-Li alloy (2090), in: C. Baker, P.J. Gregson, S.J. Harris, C.J. Peel eds., Aluminium-Lithium Alloys III, Proceedings of the Third International Aluminium-Lithium Conference, Inst of Metals, London, 1986, pp. 471–82.
32. K.S. Kumar, S.A. Brown and J.R. Pickens: Scripta Metall. Mater., 1990, vol. 24, pp. 1245–50.10.1016/0956-716X(90)90336-F ↗
33. J.C. Huang and A.J. Ardell: Mater. Sci. Technol., 1987, vol. 3, pp. 176–88.
34. K.M. Knowles and W.M. Stobbs: Acta Crystallogr Sec B., 1988, vol. 44, pp. 207–27.10.1107/S0108768187012308 ↗
35. B. Noble and G.E. Thompson: Met. Sci. J., 1971, vol. 5, pp. 114–20.10.1179/030634571790439333 ↗
36. K.D. Ralston, N. Birbilis, M. Weyland, and C.R. Hutchinson: Acta Mater., 2010, vol. 58, pp. 5941–48.10.1016/j.actamat.2010.07.010 ↗