journal article·2016-12Open access

Phase Field Simulations of Autocatalytic Formation of Alpha Lamellar Colonies in Ti-6Al-4V

Bala Radhakrishnan, Sarma Gorti, Suresh Sudharsanam Babu

Abstract

We present phase field simulations incorporating contributions due to chemical free energy, anisotropic interfacial energy, and elastic energy due to transformation strain, to demonstrate the nucleation and growth of multiple variants of alpha from undercooled beta in Ti-6Al-4V under isothermal conditions. A new composite nucleation seeding approach is used within the phase field simulations to demonstrate that the presence of a pre-existing strain field can cause the nucleation of specific crystallographic variants of alpha based on minimization of local elastic strain energy. Under conditions where specific combinations of elastic strains exist, for example in the vicinity of one or more pre-existing alpha variants, the nucleation of a new alpha variant is followed by the successive nucleation of the same variant in the form of a lamellar colony by an autocatalytic mechanism. At a given thermodynamic undercooling, the colony structure was favored at a nucleation rate that was low enough to allow sufficient growth of previously nucleated variants before another nucleus formed in their vicinity. Basket weave morphology was formed at higher nucleation rates where multiple nuclei variants grew almost simultaneously under evolving strain fields of several adjacent nuclei.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. N. Stanford and P.S. Bate, Acta. Mater. 2004, vol. 52, pp. 5215-5224.10.1016/j.actamat.2004.07.034 ↗
2. S.M. Kelly et al., Porccedings of the 7th International Conference on Trends in Welding Research, May 16–20, 2005, Pine Mountain, GA, pp. 65–70.
3. R.D. Townsend and J.S. Kirkaldy, Trans. ASM, 1969, vol. 61, pp.605–19.
4. H.I. Aaronson et al., Mater Sci Eng, 1995, vol. B32, pp. 107-123.10.1016/0921-5107(95)80022-0 ↗
5. R. Shi and Y. Wang, Acta Mater, 2013, vol. 61, pp. 6006-6024.10.1016/j.actamat.2013.06.042 ↗
6. S.M. Kelly and S.L. Kampe, Metall. Trans. A, 2004, vol. 35A, pp. 1861-1867.10.1007/s11661-004-0094-8 ↗
7. S.M. Kelly and S.L. Kampe, Metall. Trans. A, 2004, vol. 35A, pp. 1869-1879.10.1007/s11661-004-0095-7 ↗
8. D. Qiu, R. Shi, D. Zhang, W. Lu and Y. Wang, Acta Metall., 2015, vol. 88, pp. 218-231.
9. Y. Liao et al., Journal of Applied Physics, 2010, vol. 108, 063518.10.1063/1.3481858 ↗
10. J. W. Christian, “The Theory of Transformations in Metals and Alloys – Part 1,” Pergamon, Oxford, 2002.
11. G.A. Sargent et al., Metall. Trans. A, 2012, vol. 43A, pp. 3570-3585.10.1007/s11661-012-1245-y ↗
12. R.V. Ramanujan and P.J. Maziasz, Metall. Trans. A, 1996, vol. 27A, pp. 1661-1673.10.1007/BF02649823 ↗
13. S.G. Kim, W.T. Kim and T. Suzuki, Phys Rev E, 1999, vol. 60, pp. 7186-7197.10.1103/PhysRevE.60.7186 ↗
14. I. Steinbach and M. Apel, Physica D, 2006, vol. 217, pp. 153-160.10.1016/j.physd.2006.04.001 ↗
15. H. Kobayashi et al., Scripta Mater., 2003, vol. 48, pp. 689-694.10.1016/S1359-6462(02)00557-2 ↗
16. L.Q. Chen, Annual Review of Materials Research, 2002, vol. 32, 113-140.10.1146/annurev.matsci.32.112001.132041 ↗
17. N. Moelans, B. Blanpain and P. Wollants, Calphad , 2008, vol. 32, pp. 268–294.10.1016/j.calphad.2007.11.003 ↗
18. A.G. Khachaturyan, Theory of structural transformations in solids, John Wiley & Sons, New York, 1983, pp. 226-240.
19. K. Ammar, B. Appolaire, G. Cailletaud and S. Forest, Eur. J. Comput. Mech., 2009, vol. 18, pp. 485-523.10.3166/ejcm.18.485-523 ↗
20. S.Y. Hu and L.Q. Chen, Acta Mater., 2001, vol. 49, pp. 1879-1890.10.1016/S1359-6454(01)00118-5 ↗
21. J.L.W. Warwick et al., Acta Mater., 2012, vol. 60, pp. 4117-4127.10.1016/j.actamat.2012.03.039 ↗
22. I. Katzarov, S. Malinov and W. Sha, Metallurgical and Materials Transactions, 2002, vol. 33A, pp. 1027-1040.10.1007/s11661-002-0204-4 ↗
23. C.G. Rhodes and N.E. Paton, Metallurgical Transactions, 1979, vol. 10A, pp. 209-216.10.1007/BF02817630 ↗
24. Y. Ohmori, K. Nakai, H. Ohtsubo and M. Tsunofuri, Mater. Trans. JIM, 1994, vol. 35, pp. 238-246.10.2320/matertrans1989.35.238 ↗
25. T. Ahmed and H.J. Rack, Materials Science and Eng., 1998, A243, pp. 206-211.10.1016/S0921-5093(97)00802-2 ↗
26. Y. Ji et al., Journal of Phase Equilibria and Diffusion, 2016, vol. 37, pp. 53-64.10.1007/s11669-015-0436-9 ↗
27. S.L. Semiatin et al., Metall. Mater. Trans. A, 2004, vol. 35, pp. 3015-3018.10.1007/s11661-004-0250-1 ↗
28. D. Good: J. Inst. Met., 1959–1960, vol. 88, pp. 444–48.
29. L-Q. Chen and J. Shen, Computer Physics Communications, 1998, vol. 108, pp. 147-158.10.1016/S0010-4655(97)00115-X ↗
30. D. Pekurovsky, SIAM Journal of Scientific Computing, 2012, vol. 34, pp. C192-C209.10.1137/11082748X ↗
31. T.W. Heo and L-Q.Chen: JOM, 2014, vol. 66, pp. 1520–28.10.1007/s11837-014-1033-9 ↗
32. R. Shi, N. Ma and Y. Wang, Acta Mater. Vol. 60, 2012, pp. 4172-4184.10.1016/j.actamat.2012.04.019 ↗
33. F. Diu, D.W. Zhao and G.C. Yang, Metall. Mater. Trans., 2001, vol. 32B, pp. 449-457.
34. O.M. Barabash et al., Journal of Applied Physics, 2003, vol. 94, pp. 738-742.10.1063/1.1579863 ↗
35. O.M. Barabash et al., Journal of Applied Physics, 2004, vol. 96, pp. 3673-367.10.1063/1.1777393 ↗