journal article·2011-10

A Transient Thermal Model for Friction Stir Weld. Part II: Effects of Weld Conditions

X. X. Zhang, B. L. Xiao, Z. Y. Ma

Publisher page

Abstract

In Part II of this series of articles, the transient thermal model, which was introduced in Part I, is used to explore the effects of welding conditions on the heat generation and temperature. FSW of the 6061-T651 aluminum alloy is modeled to demonstrate the model. The following two steps are adopted to study the influence of welding conditions on the heat generation and temperature. First, the thermal model is used to compute the heat generation and temperature for different welding conditions, the calculated results are compared with the reported experimental temperature, and a good agreement is observed. Second, the analytical method is used to explore the approximate functions describing the effect of welding conditions on the heat generation and temperature. Based on the computed results, we discuss the relationship between the welding conditions, heat generation, temperature, and friction coefficient, and propose a relationship map between them for the first time at the end.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
2. C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling, and C.C. Bampton: Scripta. Mater., 1997, vol. 36, pp. 69–75.10.1016/S1359-6462(96)00344-2 ↗
3. M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, R.A. Spurling, and W.H. Bingle: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1955–64.10.1007/s11661-998-0021-5 ↗
4. Y.S. Sato, H. Kokawa, M. Enmoto, and S. Jogan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2429–38.10.1007/s11661-999-0251-1 ↗
5. Y.S. Sato, M. Urata, and H. Kokawa: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 625–35.10.1007/s11661-002-0124-3 ↗
6. P. Cavaliere, G. Campanile, F. Panella, and A. Squillace: J. Mater. Process. Technol., 2006, vol. 5, pp. 263–70.10.1016/j.jmatprotec.2006.06.015 ↗
7. W.B. Lee, Y.M. Yeon, and S.B. Jung: Mater. Trans., 2004, vol. 45, pp. 1700–05.10.2320/matertrans.45.1700 ↗
8. S.G. Lim, S.S. Kim, C.G. Lee, and S.J. Kim: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2829–35.10.1007/s11661-004-0230-5 ↗
9. S.R. Ren, Z.Y. Ma, and L.Q. Chen: Scripta Mater., 2007, vol. 56, pp. 69–72.10.1016/j.scriptamat.2006.08.054 ↗
10. A. Scialpi, L.A.C. De Filippis, and P. Cavaliere: Mater. Des., 2007, vol. 28, pp. 1124–29.10.1016/j.matdes.2006.01.031 ↗
11. H. Fujii, L. Cui, M. Maeda, and K. Nogi: Mater. Sci. Eng. A, 2006, vol. A419, pp. 25–31.10.1016/j.msea.2005.11.045 ↗
12. F.C. Liu and Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2378–88.10.1007/s11661-008-9586-2 ↗
13. H.B. Schmidt and J.H. Hattel: Scripta Mater., 2008, vol. 58, pp. 332–37.10.1016/j.scriptamat.2007.10.008 ↗
14. J.H. Kim, F. Barlat, C. Kim, and K. Chung: Metall. Mater. Int., 2009, vol. 15, pp. 125–32.10.1007/s12540-009-0125-5 ↗
15. S. Xu, X. Deng, and A.P. Reynolds: Sci. Technol. Weld. Join., 2001, vol. 6, pp. 191–93.10.1179/136217101101538640 ↗
16. H. Schmidt and J. Hattel: Model. Simul. Mater. Sci. Eng., 2005, vol. 13, pp. 77–93.10.1088/0965-0393/13/1/006 ↗
17. Q.Z. Zhang, L.W. Zhang, W.W. Liu, X.G. Zhang, W.H. Zhu, and S. Qu: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 737–43.10.1179/174329306X153222 ↗
18. Z. Zhang and H.W. Zhang: Int. J. Adv. Manuf. Technol., 2008, vol. 37, pp. 279–93.10.1007/s00170-007-0971-6 ↗
19. R. Nandan, G.G. Roy, T.J. Lienert, and T. DebRoy: Acta Mater., 2007, vol. 55, pp. 883–95.10.1016/j.actamat.2006.09.009 ↗
20. A. Arora, R. Nandan, A.P. Reynolds, and T. DebRoy: Scripta Mater., 2009, vol. 60, pp. 13–16.10.1016/j.scriptamat.2008.08.015 ↗
21. A.P. Reynolds, W. Tang, Z. Khandkar, J.A. Khan, and K. Lindner: Sci. Technol. Weld. Join., 2005, vol. 10, pp. 190–99.10.1179/174329305X37024 ↗
22. Y.J. Chao and X. Qi: Proc. 1st Int. Symp. on Friction Stir Welding, TWI, Thousand Oaks, CA, June 1999, pp. 31–38.
23. Ø. Frigaard, Ø. Grong, and O.T. Midling: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1189–98.10.1007/s11661-001-0128-4 ↗
24. M. Song and R. Kovacevic: Int. J. Mach. Tools. Manuf., 2003, vol. 43, pp. 605–15.10.1016/S0890-6955(03)00022-1 ↗
25. M.Z.H. Khandkar, J.A. Khan, and A.P. Reynolds: Sci. Technol. Weld. Join., 2003, vol. 8, pp. 165–74.10.1179/136217103225010943 ↗
26. H. Schmidt, J. Hattel, and J. Wert: Model. Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 143–57.10.1088/0965-0393/12/1/013 ↗
27. H. Schmidt and J. Hattel: Sci. Technol. Weld. Join., 2005, vol. 10, pp. 176–86.10.1179/174329305X36070 ↗
28. M.J. Peel, A. Steuwer, P.J. Withers, T. Dickerson, Q. Shi, and H. Shercliff: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2183–93.10.1007/BF02586138 ↗
29. X.X. Zhang, B.L. Xiao, and Z.Y. Ma: Metall. Mater. Trans. A. DOI: 10.1007/s11661-011-0729-5.10.1007/s11661-011-0729-5 ↗
30. P. Colegrove, M. Pinter, D. Graham, and T. Miller: Proc. 2nd Int. Symp. on Friction Stir Welding, TWI, Gothenburg, Sweden, June 2000, pp. 26–28.
31. Q. Shi, T. Dickerson, and H.R. Shercliff: Proc. 4th Int. Symp. on Friction Stir Welding, TWI, Park City, UT, May 2003, pp. 14–16.
32. Recommended Values of Thermophysical Properties for Selected Commercial Alloys, C.M. Kenneth, ed., Woodhead Publishing Ltd., Cambridge, England, 2002.
33. J.H. Yan, M.A. Sutton, and A.P. Reynolds: Sci. Technol. Weld Join., 2005, vol. 10, pp. 725–36.10.1179/174329305X68778 ↗
34. T. Long, W. Tang, and A.P. Reynolds: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 311–17.10.1179/174329307X197566 ↗
35. K. Mundra, T. DebRoy, and K.M. Kelkar: Numer. Heat Transfer A, 1996, vol. 29, pp. 115–29.10.1080/10407789608913782 ↗