journal article·2005-12

Formability of friction-stir-welded dissimilar-aluminum-alloy sheets

M. P. Miles, T. W. Nelson, D. W. Melton

Publisher page

Abstract

Friction stir welding (FSW) was investigated as a method for joining dissimilar-aluminum alloys 5182-O, 5754-O, and 6022-T4. These alloys are used in automotive applications in which parts consisting of dissimilar welded combinations of these alloys may be of interest. This study focuses on the formability of friction-stir-welded, dissimilar-alloy pairs of essentially the same gage, in order to investigate the mechanical properties that can be obtained using this approach. Testing showed that the properties of welded 5182/5754 alloy pairs retained reasonably good formability compared to base material performance. However, the 5182/6022 and 5754/6022 alloy pairs had significantly reduced formability compared to the base material properties, with failures occurring in the heat-affected zone (HAZ) of the 6022 or in the weld nugget itself. However, this level of formability was not much worse than that of monolithic, friction-stir-welded 6022.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. M.M. Mossman and J.C. Lippold: Welding J., 2002, Sept., pp. 188S–194S.
2. W.B. Lee, Y.M. Yeon, and S.B. Jung: J. Mater. Sci., 2003, vol. 38, pp. 4183–91.10.1023/A:1026337807920 ↗
3. J.H. Ouyang and R. Kovacevic: J. Mater. Eng. Performance, 2002, vol. 11 (1), pp. 51–63.10.1361/105994902770344394 ↗
4. P.A. Friedman and G.T. Kridli: J. Mater. Eng. Performance, 2000, vol. 9 (5), pp. 541–51.10.1361/105994900770345674 ↗
5. A. Buste, X. Lalbin, and M.J. Worswick: Proc. Int. Symp. on Light Metals, M. Bouchard and A. Faucher, eds., Canadian Institute of Mining, Metallurgy, and Petroleum, Montreal. 1999, pp. 485–500.
6. R.W. Davies, G.J. Grant, H.E. Oliver, M.A. Khaleel, and M.T. Smith: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 275–83.10.1007/s11661-001-0259-7 ↗
7. E.R. Pickering, M.A. Glagola, R.M. Ramage, and G.A. Taylor: 1995 Int. Congr. Expo. Meeting, Society of Automotive Engineers, Warrendale, PA, pp. 67–73.
8. A.K. Ghosh: Met. Progr., 1975, May, pp. 52–54.10.5465/ambpp.1975.4980688 ↗
9. A.K. Ghosh: Met. Eng. Q., 1975, Aug., pp. 53–64.10.1021/cen-v053n039.p064 ↗
10. M.P. Miles, J.L. Siles, R.H. Wagoner, and K. Narasimhan: Metall. Trans. A, 1993, vol. 24A, pp. 1143–51.10.1007/BF02657245 ↗
11. Y.S. Suh and R.H. Wagoner: J. Mater. Eng. Performance, 1996, vol. 5, pp. 489–99.10.1007/BF02648846 ↗
12. R.H. Wagoner, W. Wang, and S. Sriram: J. Mater. Processing Technol., 1994, 45, pp. 13–18.10.1016/0924-0136(94)90311-5 ↗
13. S.P. Keeler and W.A. Backofen: Trans. ASM, 1963, vol. 56, pp. 25–48.
14. S.S. Hecker: Sheet Met. Ind., 1975, Nov., pp. 671–76.
15. M.P. Miles, D. Melton, and T.W. Nelson: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3461–68.10.1007/s11661-004-0183-8 ↗
16. A.V. Bhagwan, G.T. Kridli, and P.A. Friedman: NAMRC XXXI Conf., Hamilton, ON, Canada, Society of Manufacturing Engineers, Dearborn, MI, 2003, pp. 1–8.