Thermal strain in the mushy zone related to hot tearing
Source abstract
Abstract
A volume-averaged two-phase model addressing the main transport phenomena associated with hot tearing in an isotropic mushy zone during solidification of metallic alloys has recently been presented elsewhere along with a new hot tearing criterion addressing both inadequate melt feeding and excessive deformation at relatively high solid fractions. The viscoplastic deformation in the mushy zone is addressed by a model in which the coherent mush is considered as a porous medium saturated with liquid. The thermal straining of the mush is accounted for by a recently developed model taking into account that there is no thermal strain in the mushy zone at low solid fractions because the dendrites then are free to move in the liquid, and that the thermal strain in the mushy zone tends toward the thermal strain in the fully solidified material when the solid fraction tends toward one. In the present work, the authors determined how variations in the parameters of the constitutive equation for thermal strain influence the hot tearing susceptibility calculated by the criterion. It turns out that varying the parameters in this equation has a significant effect on both liquid pressure drop and viscoplastic strain, which are key parameters in the hot tearing criterion. However, changing the parameters in this constitutive equation will result in changes in the viscoplastic strain and the liquid pressure drop that have opposite effects on the hot tearing susceptibility. The net effect on the hot tearing susceptibility is thus small.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. J. Campbell: Castings, Butterworth Heinemann, Oxford, United Kingdom, 1991.
2. I. Farup and A. Mo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1461–72.10.1007/s11661-000-0264-2 ↗
3. M. M’Hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081–93.10.1007/s11661-002-0040-6 ↗
4. J. Ni and C. Beckermann: Metall. Mater. Trans. B, 1991, vol. 22B, pp. 349–61.10.1007/BF02651234 ↗
5. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1997, vol. 13, no. 3, pp. 215–35.10.1016/S0749-6419(97)00009-0 ↗
6. C.L. Martin, D. Favier, and M. Suéry: Inter. J. Plasticity, 1999, vol. 15, pp. 981–1008.10.1016/S0749-6419(99)00017-0 ↗
7. C.L. Martin, M. Braccini, and M. Suéry: Mater. Sci. Eng. A, 2002, vol. 325A, pp. 293–302.
8. O. Ludwig, B. Commet, J.-M. Drezet, C.L. Martin, and M. Suéry: in Modeling of Casting, Welding and Advanced Solidification Processes X.D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., 2003, pp. 183–90.
9. M. M’Hamdi, A. Mo, and H.G. Fjær: Metall. Mater. Trans. A, in press.
10. M. M’Hamdi, H.G. Fjær, A. Mo, D. Mortensen, S. Benum: in Solidification of aluminium alloys. Q. Han, M.G. Chu, D.A. Granger, eds., TMS, Warrendale, PA, 2004, pp. 191–99.
11. H.G. Fjær and A. Mo: Metall. Mater. Trans. B, 1990, vol. 21B, pp. 1049–61.
12. B. Magnin, L. Katgerman, and B. Hannart: in Modelling of Casting, Welding and Advanced Solidification Processes X. M. Cross and J. Campbell, eds., 1995, pp. 303–10.
13. H.G. Fjær, E.K. Jensen, and A. Mo: Proc. 5 th International Aluminium Extrusion Technology Seminar, R.I. Werner and V.R. Bird, eds., The Aluminium Association, Aluminium Extruders Council, 1992, pp. 113–20.
14. D.J. Lahaie and M. Bouchard: Metall. Mater. Trans. B, 2001, vol. 32, pp. 697–705.10.1007/s11663-001-0124-5 ↗
15. M. Rappaz, J.-M. Drezet, M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
16. U. Feurer: Giesserei Forschung, 1976, vol. 28, p. 75.
17. L. Katgerman: J. Met. 1982, vol. 34, pp. 46–49.
18. A. Stangeland, A. Mo, Ø. Nielsen, D. Eskin, and M. M’Hamdi: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2903–15.10.1007/s11661-004-0238-x ↗
19. D. Viano, D. StJohn, J. Grandfield, C. Cáceres: “Hot tearing in Aluminium-Cupper alloys”, Conference paper at the TMS Annual Meeting in San Francisco, California, USA, February 2005, p. 1069.
20. A.L. Dons, E.K. Jensen, Y. Langsrud, E. Trømborg, and S. Brusethaug: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2135–46.10.1007/s11661-999-0025-9 ↗
21. C.L. Martin, O. Ludwig, and M. Suéry: In H.A. Mang, F.G. Rammerstorfer, J. Eberhardsteiner, eds. Proc. World Congress on Computational Mechanics V. Vienna, Austria, 2002, Available at: http://wccm.tuwien.ac.at/index.html
22. M. Rappaz, J.-M. Drezet, P.-D. Grasso, and A. Jacot: in Modelling of Casting, Welding and Advanced Solidification Processes X. D. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., 2003, pp. 53–60, TMS, Warrendale, PA.
23. V. Mathier, A. Jacot, and M. Rappaz: Modelling Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 1–12.10.1088/0965-0393/12/3/009 ↗
24. S.S. Instone: PhD Thesis, Department of Mining, Minerals and Materials Engineering, The University of Queensland, Brisbane, Australia, 1999.
25. S.S. Insone, D. StJohn, and J. Grandfield: Int. J. Cast Met. Res., 2000, vol. 12, no. 6, pp. 441–56.10.1080/13640461.2000.11819381 ↗
26. H.G. Fjær, E.J. Holm, and M. M’Hamdi: Aluminium, 2002, vol. 78, pp. 843–47.
27. A. Stangeland: Ph.D. Thesis, University of Oslo, Oslo, Norway, 2005.
28. J.A. Spittle and A.A. Cushway: Met. Technol. 1983, vol. 10, no. 1, pp. 6–13.10.1179/030716983803291226 ↗
29. A. Stangeland, A. Mo, and D. Eskin: unpublished research, 2005.
30. M. M’Hamdi and A. Mo: Mater. Sci. Eng. A. Advances in Solidification Processes, Stockholm, 7–10 June, 2005.
31. R.D. Pehlke, A. Jeyarajan, and H. Wada. Summary of Thermal properties for casting alloys and mold materials, National Science Foundation Applied Research Division, Report No. NSF/MEA-82028, National Technical Information Service, Springfield USA, 1982.
32. O. Ludwig: Ph.D. Thesis, Institut National Polytechnique de Grenoble, Grenoble, France, 2004.
33. Ø. Nielsen, L. Arnberg, A. Mo, and H. Thevik: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2455–62.10.1007/s11661-999-0254-y ↗