Effect of Ca Addition on the Intensity of the Rare Earth Texture Component in Extruded Magnesium Alloys
Source abstract
Abstract
Extruded Mg alloys usually display strong basal fiber textures, which are related to poor formability. Inspired by the texture weakening effect of the addition of rare earths (RE) to Mg alloys, two Mg-Ca alloys were designed and a range of extrusion conditions were explored in attempts to reproduce this effect. Constant strain rate and strain rate change compression tests were performed on the specially prepared Mg-0.5Ca and Mg-1Ca alloys. Dynamic strain aging (DSA) was observed to take place in both alloys over a well-defined temperature and strain rate range. Seven extrusion trials were then carried out on the Mg-0.5Ca alloy within and external to the DSA range of conditions. From the resulting textures and microstructures, it is concluded that the 〈11−21〉 (RE) texture component is formed when extrusion is carried out while DSA is taking place. The occurrence of this type of texture weakening is attributed to the promotion of recrystallization within the shear bands formed when the rate sensitivity is negative. The latter in turn arises because of the DSA taking place in the presence of solute Ca.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. E. Yukutake, J. Kaneko, M. Sugamata: Mater. Trans., 2003, vol. 44, pp. 452–57.10.2320/matertrans.44.452 ↗
2. T. Itoi, T. Inazawa, M. Yamasaki, Y. Kawamura, M. Hirohashi: Mater. Sci. Eng. A, 2013, vol. 560, pp. 216–23.10.1016/j.msea.2012.09.059 ↗
3. K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yi, D. Letzig: Scripta Mater., 2010, vol. 63, pp. 725–30.10.1016/j.scriptamat.2009.12.033 ↗
4. T. Al-Samman and X. Li: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3809–22.10.1016/j.msea.2011.01.080 ↗
5. I. Basu, T. Al-Samman: Acta Mater., 2014, vol. 67, pp. 116–33.10.1016/j.actamat.2013.12.015 ↗
6. Y. Chino, K. Sassa, M. Mabuchi: Mater. Sci. Eng. A, 2009, vol. 513–514, pp. 394–400.10.1016/j.msea.2009.01.074 ↗
7. J.W. Senn and S.R. Agnew: in Conference of Metallurgists TMS, M.O. Pekguleryuz and L.W.F. Mackenzie, eds., Montreal, 2006, pp. 115–30.
8. N. Stanford, M.D. Callaghan, B. de Jong: Mater. Sci. Eng. A, 2013, vol. 565, pp. 459–68.10.1016/j.msea.2012.12.023 ↗
9. J. Bohlen, M.R. Nürnberg, J.W. Senn, D. Letzig, S.R. Agnew: Acta Mater., 2007, vol. 55, pp. 2101–12.10.1016/j.actamat.2006.11.013 ↗
10. L.W.F. Mackenzie, M.O. Pekguleryuz: Scripta Mater., 2008, vol. 59, pp. 665–68.10.1016/j.scriptamat.2008.05.021 ↗
11. R.K. Mishra, A.K. Gupta, P.R. Rao, A.K. Sachdev, A.M. Kumar, A.A. Luo: Scripta Mater., 2008, vol. 59, pp. 562–65.10.1016/j.scriptamat.2008.05.019 ↗
12. N. Stanford, D. Atwell, A. Beer, C. Davies, M.R. Barnett: Scripta Mater., 2008, vol. 59, pp. 772–75.10.1016/j.scriptamat.2008.06.008 ↗
13. N. Stanford: Mater. Sci. Eng. A, 2010, vol. 528, pp. 314–22.10.1016/j.msea.2010.08.097 ↗
14. D.W. Kim, B.C. Suh, M.S. Shim, J.H. Bae, D.H. Kim, N. Kim: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2950–61.10.1007/s11661-013-1674-2 ↗
15. Y. Chino, T. Ueda, Y. Otomatsu, K. Sassa, X. Huang, K. Suzuki, M. Mabuchi: Mater. Trans., 2011, vol. 52, pp. 1477–82.10.2320/matertrans.M2011048 ↗
16. L. Jiang, J.J. Jonas, and R. Mishra: in Magnesium Technology 2011, W. Sillekens, S. Agnew, S. Mathaudhu, and N. Neelameggham, eds., TMS, San Diego, 2011, pp. 333–38.
17. L. Jiang, J.J. Jonas, R. Mishra: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6596–6605.10.1016/j.msea.2011.05.027 ↗
18. J. Baird: The Inhomogeneity of Plastic Deformation, ASM Seminar, 1973, pp. 191–222.
19. T. Chandra, J.J. Jonas: Metall. Trans., 1970, vol. 1, pp. 2079–82.10.1007/BF02643417 ↗
20. N. Stanford, M.R. Barnett: Mater. Sci. Eng. A, 2008, vol. 496, pp. 399–408.10.1016/j.msea.2008.05.045 ↗
21. S.L. Semiatin and J.J. Jonas: Formability & Workability of Metals: Plastic Instability and Flow Localization, American Society for Metals, Materials Park, OH, 1984.10.1016/0001-6160(84)90080-4 ↗
22. C.R. Hutchinson, J.F. Nie, S. Gorsse: Metall. Mater. Trans. A, 2005, vol. 36, pp. 2093–2105.10.1007/s11661-005-0330-x ↗
23. J. Čermák, I. Stloukal: Phys. Status Solidi A, 2006, vol. 203, pp. 2386–92.10.1002/pssa.200622219 ↗
24. P.G. Shewmon and F.N. Rhines: J. Met., 1954, vol. 6, pp. 1021–25.10.1007/BF03398339 ↗
25. L. Huber, I. Elfimov, J. Rottler, M. Militzer. Phys. Rev. B., 2012, vol. 85, pp. 144301.10.1103/PhysRevB.85.144301 ↗
26. L. Jiang, J.J. Jonas, R.K. Mishra, A.A. Luo, A.K. Sachdev, S. Godet. Acta Mater., 2007, vol. 55, pp. 3899–3910.10.1016/j.actamat.2007.03.006 ↗
27. B.C. Wonsiewicz, W.A. Backofen. Trans. Metall. Soc. AIME, 1967, vol. 239, pp. 1422–31.