Bainite Transformation in Deformed Austenite
Source abstract
Abstract
This study documents the characteristics of bainite transformations in deformed austenite during continuous cooling of a low-carbon microalloyed steel. In particular, it describes the distinguishing features of the two types of bainite observed: conventional bainite (CB) and acicular ferrite (AF). CB nucleates at prior austenite grain boundaries and grows as packets of parallel ferrite laths. Growth of CB packets is limited by either the deformation substructure (“mechanical stabilization”) or austenite grain boundaries. AF nucleates at intragranular sites and grows as individual ferrite laths or groups of parallel laths. In an AF group of parallel laths, some neighboring laths have the same orientation, but a significant number have dissimilar orientations. Neighboring laths having dissimilar orientation are two variants of either Kurdjumov–Sachs (KS) or Nishiyama–Wasserman (NW). It is proposed that the AF nucleation sites are dislocation boundaries having a relatively high misorientation (i.e., microbands (MBs) and minimized by the variant selection mechanism).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. D. Boyd, I. Yakubtsov, R. Zhang, and P. Poruks: in Pipelines for the 21st Century, W. Chen, ed., CIM, Montreal, 2005, pp. 63–82.
2. A.J. DeArdo: in Pipelines for the 21st Century, W. Chen, ed., CIM, Montreal, 2005, pp. 85–100.
3. T. Gladman, D. Dulieu, and I. McIvor: Microalloying 75, Union Carbide Corporation, New York, NY, 1977, pp. 32–55.
4. I. Tamura, C. Ouchi, T. Tanaka, and H. Sekine: Thermomechanical Processing of High Strength Low Alloy Steels, Butterworth and Co., London, 1988.
5. H.K.D.H. Bhadeshia: Bainite in Steels, Institute of Materials, London, 1992, p. 365.
6. H. Nakasugi, H. Matsuda, and H. Tamehiro: Alloys for the 1980’s, Climax Molybdenum, Ann Arbor, MI, 1980, p. 213.
7. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937–45.10.2355/isijinternational.35.937 ↗
8. Y.E. Smith and C.A. Siebert: Metall. Trans., 1971, vol. 2, pp. 1711–25.10.1007/BF02663352 ↗
9. K. Fujiwara, S. Okaguchi, and H. Ohtani: ISIJ Int., 1995, vol. 35, pp. 1006–12.10.2355/isijinternational.35.1006 ↗
10. J.R. Yang, C.Y. Huang, and C.S. Chiou: ISIJ Int., 1995, vol. 35, pp. 1013–19.10.2355/isijinternational.35.1013 ↗
11. S. Yamamoto, H. Yokoyama, K. Yamada, and M. Nikura: ISIJ Int., 1995, vol. 35, pp. 1020–26.10.2355/isijinternational.35.1020 ↗
12. E.V. Pereloma, C. Bayley, and J.D. Boyd: Mater. Sci. Eng., 1996, vol. A210, pp. 16–24.10.1016/0921-5093(95)10065-2 ↗
13. D.Q. Bai, S. Yue, T.M. Maccagno, and J.J. Jonas: ISIJ Int., 1998, vol. 38, pp. 371–79.10.2355/isijinternational.38.371 ↗
14. I.A. Yakubtsov and J.D. Boyd: Mater. Sci. Technol., 2001, vol. 17, pp. 296–301.10.1179/026708301773002491 ↗
15. C.H. Lee, H.K.D.H. Bhadeshia, and H.-C. Lee: Mater. Sci. Eng., 2003, vol. A360, pp. 249–57.10.1016/S0921-5093(03)00477-5 ↗
16. Atlas for Bainitic Microstructures, Vol. 1, ISIJ, Tokyo, 1992.
17. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21A, pp. 817–29.10.1007/BF02656565 ↗
18. H.K.D.H. Bhadeshia: Bainite in Steels, Institute of Materials, London, 1992, p. 245.
19. G. Thewlis: Mater. Sci. Forum, 2003, vols. 426–432, pp. 4019–26.10.4028/www.scientific.net/MSF.426-432.4019 ↗
20. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Trans. A, 1990, vol. 21, pp. 1493–1507.10.1007/BF02672564 ↗
21. P.H. Shipway and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1995, vol. 11, pp. 1116–28.10.1179/mst.1995.11.11.1116 ↗
22. J.R. Yang, C.S. Chiou, and C.Y. Huang: THERMEC 97: Int. Conf. on Thermomechanical Processing of Steels and Other Materials, TMS, Warrendale, PA, 1997, pp. 435–41.
23. F. Kawabata, M. Okatsu, K. Amano, and Y. Nakano: Pipeline Technology, R. Denys, ed., Elsevier, New York, NY, 1995, vol. 2, pp. 263–71.
24. B. Gardiola, C. Esling, M. Humbert, and K.E. Hensger: Adv. Eng. Mater., 2003, vol. 5, pp. 583–87.10.1002/adem.200300389 ↗
25. Y. Zhang: Ph.D. Thesis, Queen’s University, Kingston, ON, Canada, 2004, pp. 82–94.
26. A. Lambert-Perlade, A.F. Gourgues, and A. Pineau: Acta Mater., 2004, vol. 52, pp. 2337–48.10.1016/j.actamat.2004.01.025 ↗
27. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
28. A. Ali and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1989, vol. 5, pp. 398–402.10.1179/mst.1989.5.4.398 ↗
29. I.A. Yakubtsov and J.D. Boyd: Thermec 2000: Int. Conf. on Processing and Manufacturing of Advanced Materials, T. Chandra, K. Higashi, C. Suryanarayana, and C. Tome, eds., Elsevier, New York, NY, 2001, CD.
30. P.J. Hurley, P.D. Hodgson, and B.C. Muddle: Scripta Mater., 2001, vol. 45, pp. 25–32.10.1016/S1359-6462(01)00987-3 ↗
31. W.M. Rainforth, M.P. Black, R.L. Higginson, E.J. Palmiere, C.M. Sellars, I. Prabst, P. Warbichler, and F. Hofer: Acta Mater., 2002, vol. 50, pp. 735–47.10.1016/S1359-6454(01)00389-5 ↗