journal article·2005-12

Direct laser deposition of a single-crystal Ni3Al-based IC221W alloy

Weiping Liu, J. N. DuPont

Publisher page

Abstract

Single-crystal (SX) nickel aluminide alloys have potential for structural applications where high-temperature strength and oxidation resistance are required. In this work, SX deposits of the Ni3Al-based IC221W alloy were produced on a SX Ni-base superalloy substrate by means of the laser-engineered net shaping (LENS) process. The microstructure of the deposits was characterized. The effects of processing parameters on the SX solidification in the melt pool and on the fabricability by LENS were investigated. A simple relationship between the ratio of the temperature gradient to the growth velocity and the processing parameters was derived, which can be used qualitatively to guide the proper selection of processing conditions to maintain the columnar dendritic growth during the laser deposition. On the basis of analyses and experiments, the effects of processing parameters on the susceptibility to stray grain formation and solidification cracking are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. N.S. Stoloff, C.T. Liu, and S.C. Deevi: Intermetallics, 2000, vol. 8, pp. 1313–20.10.1016/S0966-9795(00)00077-7 ↗
2. V.K. Sikka: in High Temperature Aluminides & Intermetallics, S.H. Whang, C.T. Liu, D.P. Pope, and J.O. Stiegler, eds., TMS, Warrendale, PA, 1990, pp. 505–11.
3. Physical Metallurgy & Processing of Intermetallic Compounds, N.S. Stoloff and V.K. Sikka, eds., Chapman & Hall, New York, NY, 1994.
4. M.L. Santella and Z. Feng: Analysis of Weld Solidification Cracking in Cast Nickel Aluminide Alloys, Trends in Welding Research, Proc. 4th Int. Conf, H.B. Smartt, J.A. Johnson, S.A. David, eds., Gatlinburg, TN, June 1995, ASM INTERNATIONAL, Materials Park, OH, 1995, pp. 609–14.
5. K.M. Flores and R.H. Dauskardt: Scripta Mater., 1997, vol. 36, pp. 1377–82.10.1016/S1359-6462(97)00049-3 ↗
6. W. Hofmeister, M. Griffith, M. Ensz, and J. Smugeresky: JOM, 2001, vol. 53 (9), pp. 30–34.10.1007/s11837-001-0066-z ↗
7. G.K. Lewis and E. Schlienger: Mater. Design, 2000, vol. 21, pp. 417–23.10.1016/S0261-3069(99)00078-3 ↗
8. P.A. Kobryn, E.H. Moore, and S.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 299–305.10.1016/S1359-6462(00)00408-5 ↗
9. P.C. Collins, R. Banerjee, S. Banerjee, and H.L. Fraser: Mater. Sci. Eng. A, 2003, vol. A352, pp. 118–28.10.1016/S0921-5093(02)00909-7 ↗
10. W. Liu and J.N. DuPont: Scripta Mater., 2003, vol. 48, pp. 1337–42.10.1016/S1359-6462(03)00020-4 ↗
11. W. Liu and J.N. DuPont: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2633–41.10.1007/s11661-003-0022-3 ↗
12. W. Liu and J.N. DuPont: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1133–40.10.1007/s11661-004-0039-2 ↗
13. M. Gaumann, S. Henry, F. Cleton, J.D. Wagniere, and W. Kurz: Mater. Sci. Eng. A, 1999, vol. A271, pp. 232–41.10.1016/S0921-5093(99)00202-6 ↗
14. M. Gaumann, C. Bezencon, P. Canalis, and W. Kurz: Acta Mater., 2001, vol. 49, pp. 1051–62.10.1016/S1359-6454(00)00367-0 ↗
15. Handbook of Ternary Alloy Phase Diagram, P. Villars, A. Prince, and H. Okamoto, eds., ASM International, Materials Park, OH, 1995, vol. 3, p. 3162.
16. J.M. Vitek, S.A. David, and L.A. Boatner: Sci./Technol. Weld Joining, 1997, vol. 2, pp. 109–18.10.1179/stw.1997.2.3.109 ↗
17. M.C. Fleming: Solification Processing, McGraw-Hill, New York, NY, 1974, pp. 58–64.
18. M. Rappaz, S.A. David, J.M. Vitek, and L.A. Boatner: Metall. Mater. Trans. A, 1989, vol. 20A, pp. 1125–38.10.1007/BF02650147 ↗
19. D. Rosenthal: Trans. ASME, 1946, vol. 43 (11), pp. 849–66.
20. W. Liu and J.N. DuPont: Acta Mater., 2004, vol. 52, pp. 4833–47.
21. R.R. Unocic and J.N. DuPont: Metall. Mater. Trans. B, 2004, vol. 35B: 143–152.10.1007/s11663-004-0104-7 ↗
22. J.W. Park, S.S. Babu, J.M. Vitek, E.A. Kenik, and S.A. David: J. Appl. Phys., 2003, vol. 94, pp. 4203–09.10.1063/1.1602950 ↗