Three-Dimensional Visualization of the Interaction between Fatigue Crack and Micropores in an Aluminum Alloy Using Synchrotron X-Ray Microtomography
Source abstract
Abstract
The effect of the flow-forming process on the fatigue behavior of an Al-Si-Mg alloy was investigated using synchrotron X-ray microtomography. The fatigue life of the flow-formed-T6 specimen was found to be longer than that of the as-cast-T6 in all the selected stress amplitudes. The X-ray-scanned radiographs of a flow-formed-T6 specimen were reconstructed to allow three-dimensional (3-D) visualization of distribution of micropores and pore-crack interactions. Observations were performed on different tomographic slices to investigate the interaction between the micropores and the crack. Micropores have been associated with deflections of the crack path. Mode I and Mode II stress-intensity factors (SIFs) were calculated at each position along the fatigue-crack path using a micromechanics model. The SIF increased rapidly when the fatigue crack came close to a micropore. It was found that the average value of SIFs along entire crack paths was slightly higher than the remotely applied stress intensity, although the level of antishielding was pronounced in some local regions. Crystallographic texture is proposed to be the important factor for the observed higher fatigue resistance in flow-formed-T6 material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Fatigue and fracture mechanics · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Q.G. Wang: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2887–99.10.1007/s11661-003-0189-7 ↗
2. H. Mayer, M. Papakyriacou, B. Zettl, S.E. Stanzl-Tschegg: Int. J. Fatigue, 2003, vol. 25, pp. 245–56.10.1016/S0142-1123(02)00054-3 ↗
3. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood: Mater. Sci. Eng. A, 2000, vol. 280, pp. 37–49.10.1016/S0921-5093(99)00653-X ↗
4. Q.G. Wang, D. Apelian, D.A. Lados: J. Light Met., 2001, vol. 1, pp. 73–8410.1016/S1471-5317(00)00008-0 ↗
5. J. Linder, M. Axelsson, H. Nilsson: Int. J. Fatigue, 2006, vol. 28, pp. 1752–5810.1016/j.ijfatigue.2006.01.001 ↗
6. P. Groche, D. Fritsche: Int. J. Mach. Tools Manuf., 2006, vol. 46, pp. 1261–6510.1016/j.ijmachtools.2006.01.016 ↗
7. O. Düber, B. Künkler, U. Krupp, H.J. Christ, C.P. Fritzen: Int. J. Fatigue, 2006, vol. 28, pp. 983–9210.1016/j.ijfatigue.2005.07.048 ↗
8. A. Fathulla, B. Weiss, R. Stickler: The Behavior of Short Fatigue Cracks, EFG Pub. 1, K.J. Miller, E.R. de los Rios, eds., Mechanical Engineering Publications, London, 1986, pp. 115–32.
9. N.A. Fleck, R.A. Smith: Powder Metall., 1981, vol. 3, pp. 121–2510.1179/pom.1981.24.3.121 ↗
10. J.M. Hyzak, I.M. Bernstein: Metall. Trans. A, 1982, vol. 13A, pp. 45–52.10.1007/BF02642414 ↗
11. S. Bashir, P. Taupin, S.D. Antolovich: Metall. Trans. A, 1979, vol. 10A, pp. 1481–9010.1007/BF02812013 ↗
12. K.J. Miller: Fatigue Fract. Eng. Mater. Struct., 1982, vol. 5, pp. 223–3210.1111/j.1460-2695.1982.tb01250.x ↗
13. J. Lankford: Fatigue Fract. Eng. Mater. Struct., 1982, vol. 5, pp. 238–48.10.1111/j.1460-2695.1982.tb01251.x ↗
14. S. Suresh, R.O. Ritchie: Int. Met. Rev., 1984, vol. 29, pp. 445–7610.1179/imr.1984.29.1.445 ↗
15. K. Shiozawa, Y. Tohda, S.M. Sun: Fatigue Fract. Eng. Mater. Struct., 1997, vol. 20, pp. 237–47.10.1111/j.1460-2695.1997.tb00281.x ↗
16. M.J. Caton, J.W. Jones, J.E. Allison: Mater. Sci. Eng. A, 2001, vol. A314, pp. 81–8510.1016/S0921-5093(00)01916-X ↗
17. F. Heubaum, M.E. Fine: Scripta Mater., 1984, vol. 18, pp. 1235–40.10.1016/0036-9748(84)90113-3 ↗
18. T. Seeger, P. Heuler: J. Testing Eval., 1980, vol. 8, pp. 199–20410.1520/JTE11613J ↗
19. P. DiMascio, R.A. Queeney: Int. J. Powder Metall. Powder Technol., 1983, vol. 19, pp. 127–35
20. R.D. Pendse, R.O. Ritchie: Metall. Trans. A, 1985, vol.16A, pp. 1491–50110.1007/BF02658681 ↗
21. H. Toda, I. Sinclair, J.-Y. Buffière, E. Maire, K.H. Khor, P. Gregson, T. Kobayashi: Acta Mater., 2003, vol. 52, pp. 1305–17.10.1016/j.actamat.2003.11.014 ↗
22. H. Toda, I. Sinclair, J.-Y. Buffière, E. Maire, T. Connolley, M. Joyce, K.H. Khor, P. Gregson: Phil. Mag., 2003, vol. 83, pp. 2429–4810.1080/1478643031000115754 ↗
23. L. Qian, H. Toda, K. Uesugi, T. Kobayashi, T. Ohgaki, M. Kobayashi: Appl. Phys. Lett., 2005, vol. 87, pp. 241907-1–310.1063/1.2142081 ↗
24. T. Ohgaki, H. Toda, I. Sinclair, J.-Y. Buffière, W. Ludwig, T. Kobayashi, M. Niinomi, T. Akahori: Mater. Sci. Eng. A, 2006, vol. 427, pp. 1–610.1016/j.msea.2005.07.050 ↗
25. H. Toda, H. Mizutani, T. Kobayashi, T. Akahori, M. Niinomi: Mater. Trans., 2005, vol. 46, pp. 2229–3610.2320/matertrans.46.2229 ↗
26. W. Ludwig, J.-Y. Buffière, S. Savelli, P. Cloetens: Acta Mater., 2003, vol. 51, pp. 585–9810.1016/S1359-6454(02)00320-8 ↗
27. O. Lame, D. Bellet, M. Di Michiel, D. Bouvard: Acta Mater., 2004, vol. 52, pp. 977–8410.1016/j.actamat.2003.10.032 ↗
28. J.-Y. Buffière, S. Savelli, P.H. Jouneau, E. Maire, R. Fougères: Mater. Sci. Eng., 2001, vol. A316, pp. 115–2610.1016/S0921-5093(01)01225-4 ↗
29. H. Toda, T. Ohgaki, K. Uesugi, M. Kobayashi, N. Kuroda, T. Kobayashi, M. Niinomi, T. Akahori, K. Makii, Y. Aruga: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1211–1910.1007/s11661-006-1072-0 ↗
30. Y.X. Gao, J.Z. Yi, P.D. Lee, T.C. Lindley: Acta Mater. 2004, vol. 52, pp. 5435–4910.1016/j.actamat.2004.07.035 ↗
31. J.Z. Yi, Y.X. Gao, P.D. Lee, T.C. Lindley: Mater. Sci. Eng. A, 2004, vol. 386, pp. 396–40710.1016/j.msea.2004.07.044 ↗
32. J.H. Horng, D.S. Jiang, T.S. Lui, L.H. Chen: Int. J. Cast Met. Res., 2000, vol. 13, pp. 215–22.10.1080/13640461.2000.11819404 ↗
33. K. Gall, N. Yang, M. Horstemeyer, D.L. McDowell, J. Fan: Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp.159–7210.1046/j.1460-2695.2000.00239.x ↗
34. F.T. Lee, J.F. Major, F.H. Samuel: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1553–70.10.1007/BF02647606 ↗
35. K. Gall, N. Yang, M. Hostemeyer, D.L. McDowell, J. Fan: Metall. Mater. Trans. A, 1999, vol. 30, pp. 3079–8810.1007/s11661-999-0218-2 ↗
36. D.A. Lados, D. Apelian, J.K. Donald: Acta Mater., 2006, vol. 54, pp. 1475–8610.1016/j.actamat.2005.11.019 ↗
37. D.A. Lados, D. Apelian: Mater. Sci. Eng. A, 2004, vol. 385, pp. 200–11
38. S.W. Kim, S.W. Han, U.J. Lee, K.D. Woo: Mater. Lett., 2003, vol. 58, pp. 257–61.10.1016/S0167-577X(03)00456-7 ↗
39. K.S. Chan, P. Jones, Q.G. Wang: Mater. Sci. Eng. A, 2003, vol. 341, pp. 18–3410.1016/S0921-5093(02)00196-X ↗
40. Y. Xu, S.H. Zhang, P. Li, K. Yang, D.B. Shan, Y. Lu: J. Mater. Proc. Technol., 2001, vol. 113, pp. 710–1310.1016/S0924-0136(01)00644-6 ↗
41. M.J. Caton, J.W. Jones, H. Mayer, S. Stanzl-Tschegg, J.E. Allison: Metall. Mater. Trans. A, 2003, vol. 34, pp. 33–41.10.1007/s11661-003-0206-x ↗
42. M.J. Couper, A.E. Neeson, J.R. Griffith: Fatigue Fract. Eng. Mater. Struct., 1990, vol. 13, pp. 213–27.10.1111/j.1460-2695.1990.tb00594.x ↗
43. A.A. Dabayeh, R.X. Xu, B.P. Du, T.H. Topper: Int. J. Fatigue, 1996, vol. 18, pp. 95–10410.1016/0142-1123(95)00073-9 ↗
44. M. Sonsino, J. Ziese: Int. J. Fatigue, 1993, vol. 15, pp. 75–8410.1016/0142-1123(93)90001-7 ↗
45. B. Skallerud, T. Iveland, G. Härkegård: Eng. Fract. Mech., 1993, vol. 44, pp. 857–7410.1016/0013-7944(93)90108-5 ↗
46. K.X. Hu, A. Chandra, Y. Huang: Int. J. Solids Struct., 1993, vol. 30, pp. 1473–89.10.1016/0020-7683(93)90072-F ↗
47. A.C.O. Miranda, M.A. Meggiolaro, J.T.P. Castro, L.F. Martha, T.N. Bittencourt: Eng. Fract. Mech., 2003, vol. 70, pp. 1259–7910.1016/S0013-7944(02)00099-1 ↗
48. Z.H. Li, Q. Chen: Int. J. Fract., 2002, vol. 118, pp. 29–4010.1023/A:1022652725943 ↗
49. A.K. Soh, C.H. Yang: Eng. Fract. Mech., 2004, vol. 71, pp. 193–21710.1016/S0013-7944(03)00097-3 ↗
50. T.L. Anderson: Fracture Mechanics: Fundamentals and Applications, 3rd ed., CRC Press, Boca Raton, FL, 2005, pp. 45–48.10.1201/9781420058215 ↗
51. F. Erdogan, C.G. Sih: ASME J. Basic. Eng., 1963, vol. 85, pp. 519–2710.1115/1.3656897 ↗
52. C. Capdevila, Y.L. Chen, N.C.K. Lassen, A.R. Jones, H.K.D.H. Bhadeshia: Mater. Sci. Technol. 2001, vol. 17, pp. 693–99.10.1179/026708301101510410 ↗
53. T. Zhai, X.P. Jiang, J.X. Li, M.D. Garratt, G.H. Bray: Int. J. Fatigue, 2005, vol. 27, pp. 1202–0910.1016/j.ijfatigue.2005.06.021 ↗
54. Z. B. Sajuri, Y. Miyashita, Y. Hosokai, Y. Mutoh: Int. J. Mech. Sci., 2006, vol. 48, pp. 198–20910.1016/j.ijmecsci.2005.09.003 ↗
55. D.L. Chen, M.C. Chaturvedi, N. Goel, N.L. Richards: Int. J. Fatigue, 1999, vol. 21, pp. 1079–8610.1016/S0142-1123(99)00087-0 ↗
56. R.K. Singh, A.K. Singh, N. Eswara Prasad: Mater. Sci. Eng., 2000, vol. A277, pp. 114–2210.1016/S0921-5093(99)00549-3 ↗
57. A. Mateo, L. Llanes, N. Akdut, J. Stolarz, M. Anglada: Int. J. Fatigue, 2003, vol. 25, pp. 481–8810.1016/S0142-1123(02)00173-1 ↗