journal article·2011-06Open access

Isothermal Transformation of a CMnSi Steel Below the MS Temperature

Donghwi Kim, John G. Speer, B. C. De Cooman

Abstract

After applying an austenitizing heat treatment above Ac3 followed by quenching to a temperature below the martensite-start (MS) temperature, an isothermal transformation was observed by means of dilatation measurement in a low-alloyed, low-carbon steel. The precise nature of this isothermal transformation below the MS temperature is still unclear. The present contribution is a comprehensive comparison of the main difference between the isothermal transformation below the MS temperature and the athermal martensitic transformation using electron microscopy and internal friction measurements. The mechanical properties of the transformation product also were characterized. The observations revealed that the isothermal transformation product below the MS temperature had its own characteristic microstructure with a Kurdjumov–Sachs orientation relationship with the parent austenite and without carbide precipitation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. B.L. Averbach and M. Cohen: Trans. AIME, 1949, vol. 41, pp. 1024-60.
2. S.R. Pati and M. Cohen: Acta Metall., 1969, vol. 17, pp. 189-99.10.1016/0001-6160(69)90058-3 ↗
3. G.V. Kurdjumov and O.P. Maksimova: Dokl. Akad. Nauk. SSSR, 1948, vol. 61, p. 83.
4. S.V. Radcliffe and E.C. Rollason: ISIJ Int., 1959, vol. 191, pp. 56-65.
5. M. Oka and H. Okamoto: Metall. Trans. A, 1988, vol. 19A, pp. 447-52.10.1007/BF02649258 ↗
6. A. Borgenstam and M. Hillert: Acta Mater., 1997, vol. 45, pp. 651-62.10.1016/S1359-6454(96)00186-3 ↗
7. S.J. Kim, Han S. Kim, and B.C. De Cooman: AIST Steel Properties and Applications Symp., Proc. of the Materials Science and Technology 2007 Conf, AIST, Detroit, MI, 2007, pp. 73–83.
8. S.M.C. van Bohemen, M.J. Santofimia, and J. Sietsma: Scripta Mater., 2008, vol. 58, pp. 488-91.10.1016/j.scriptamat.2007.10.045 ↗
9. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323-31.10.1016/j.actamat.2006.07.009 ↗
10. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279-88.10.1016/j.actamat.2005.11.001 ↗
11. G. Nolze: Cryst. Res. Tech., 2006, vol. 41, no. 1, pp. 72-77.10.1002/crat.200410533 ↗
12. G. Miyamoto, N. Takayama, and T. Furuhara: Scripta Mater., 2009, vol. 60, pp. 1113-16.10.1016/j.scriptamat.2009.02.053 ↗
13. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789-99.10.1016/S1359-6454(02)00577-3 ↗
14. K. Wakasa and C.M. Wayman: Acta Metall., 1981, vol. 29, pp. 991-1011.10.1016/0001-6160(81)90052-3 ↗
15. B.P.J. Sandvik and C.M. Wayman: Metallography, 1983, vol. 16, pp. 199-227.10.1016/0026-0800(83)90005-8 ↗
16. R. Bagramov, D. Mari, and W. Benoit: Phil. Mag. A, 2001, vol. 81, no. 12, pp. 2797-808.10.1080/01418610108217165 ↗
17. M.S. Blanter, I.S. Golovin, H. Neuhäuser, and H.-R. Sinning: Internal Friction in Metallic Materials, Springer, Berlin, Germany, 2007, pp. 356-412.10.1007/978-3-540-68758-0 ↗
18. I. Tkalcec and D. Mari: Defect. Diffus. Forum, 2002, vols. 203–205, pp. 253-56.10.4028/www.scientific.net/DDF.203-205.253 ↗
19. I. Tkalcec, D. Mari, and W. Benoit: Mater. Sci. Eng. A, 2006, vol. 442, pp. 471-75.10.1016/j.msea.2006.03.115 ↗
20. J. Parisot and G. Ferron: Physica Status Solidi A, 1977, vol. 44, pp. 549-55.10.1002/pssa.2210440218 ↗
21. R.A. Johnson: Acta Metall., 1965, vol. 13, pp. 1259-62.10.1016/0001-6160(65)90035-0 ↗
22. A.S. Nowick and B.S. Berry: Anelastic Relaxation in Crystalline Solids, Academic Press, New York, NY, 1972, pp. 52–63, 402–10.
23. J. McGrath and R. Rawlings: Acta Metall., 1966, vol. 14, pp. 1-4.10.1016/0001-6160(66)90264-1 ↗
24. T.S. Ke: Scripta Metall., 1982, vol. 15, pp. 225-32.
25. A. Seeger: Scripta Metall., 1982, vol. 16, pp. 241-47.10.1016/0036-9748(82)90343-X ↗
26. A. Seeger, M. Weller, J. Diehl, Z.L. Pan, J.X. Zhang, and T.S. Ke: Zeitschrift Fuer Metallkunde, 1982, vol. 73, pp. 1-20.
27. H. Mecking and U.F. Cocks: Acta Metall., 1981, vol. 29, pp. 1865-75.10.1016/0001-6160(81)90112-7 ↗
28. Y. Lan, H.J. Klaar, and W. Dahl: Metall. Trans. A, 1992, vol. 23A, pp. 537-44.10.1007/BF02801171 ↗
29. Y. Lan, H.J. Klaar, and W. Dahl: Metall. Trans. A, 1992, vol. 23A, pp. 545-49.10.1007/BF02801172 ↗
30. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57-70.10.1016/0001-6160(84)90202-5 ↗
31. Y. Bergstrom and W. Roberts: Acta Metall., 1973, vol. 21, pp. 741-45.10.1016/0001-6160(73)90038-2 ↗
32. R. Rodriguez and I. Gutierrez: Mater. Sci. Forum, 2003, vols. 426–432, pp. 4525-30.10.4028/www.scientific.net/MSF.426-432.4525 ↗