Environmental Fatigue-Crack Surface Crystallography for Al-Zn-Cu-Mg-Mn/Zr
Source abstract
Abstract
The scanning electron microscope (SEM)–based electron backscattered diffraction (EBSD)/stereology technique quantitatively establishes distributions of the crystallographic characteristics of environmental-fatigue crack features for slightly overaged Al-Zn-Cu-Mg-X (X = Zr or Mn) alloys stressed in the low-growth-rate regime. Results for these homogeneous slip alloys conform to a substantial companion study of planar slip-prone Al-Cu-Mg/Li. Transgranular-crack characteristics are similar for the Mn and Zr variants, independent of grain size and recrystallization. Two morphologies of facetlike features exhibit a wide range of crystallographic orientations, change character at grain boundaries indicating an important role of grain orientation, and form in highly tensile-stressed spatial orientations about a crack tip. Similar characteristics for Al-Zn and Al-Cu suggest a common damage mechanism, speculatively attributed to hydrogen-environment embrittlement by decohesion. Slip-deformation band cracking resulting in facets near {111}, stimulated by H-enhanced localized plasticity, is not a viable mechanism for environmental fatigue. Repetitively stepped facets with surface curvature may involve H-enhanced cleavage along {100} or {110} planes subsequently distorted by plasticity. Broad-flat facets speculatively result from tensile stress-based cracking through dislocation cell structure, evolved by cyclic plasticity and containing trapped H.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Aluminum Alloy Microstructure Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. R.P. Gangloff: in Fatigue ‘02, A.F. Blom, ed., Engineering Materials Advisory Services, West Midlands, United Kingdom, 2002, pp. 3401–34
2. J. Petit, J. de Fouquet, G. Henaff: in Handbook on Fatigue Crack Propagation in Metallic Structures, A. Carpinteri, ed., Elsevier, New York, NY, 1994, pp. 1159–120410.1016/B978-0-444-81645-0.50010-X ↗
3. J. Petit, G. Henaff, and C. Sarrazin-Baudoux: Comprehensive Structural Integrity, Pergamon Press, Oxford, United Kingdom, 2003, pp. 211–8010.1016/B0-08-043749-4/06130-9 ↗
4. R.P. Wei and R.P. Gangloff: in Fracture Mechanics: Perspectives and Directions. 20th Symp, ASTM STP 1020, R.P. Wei and R.P. Gangloff, eds., ASTM, Phiadelphia, PA, 1989, pp. 233–6410.1520/STP1020-EB ↗
5. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, London, 1998, pp. 335–5110.1017/CBO9780511806575 ↗
6. R.S. Piascik, R.P. Gangloff: Metall. Trans. A, 1993, vol. 24A, pp. 2751–6210.1007/BF02659499 ↗
7. D.C. Slavik, C.P. Blankenship Jr., E.A. Starke Jr., R.P. Gangloff: Metall. Trans. A, 1993, vol. 24A, pp. 1807–1710.1007/BF02657855 ↗
8. D.C. Slavik, R.P. Gangloff: Acta Mater., 1996, vol. 44, pp. 3515–3410.1016/1359-6454(96)00013-4 ↗
9. D.C. Slavik, J.A. Wert, R.P. Gangloff: J. Mater. Res., 1993, vol. 8, pp. 2482–9110.1557/JMR.1993.2482 ↗
10. T.H. Sanders, E.A. Starke Jr.: Acta Metall., 1982, vol. 30, pp. 927–3910.1016/0001-6160(82)90199-7 ↗
11. K.V. Jata, E.A. Starke Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 1011–2610.1007/BF02661267 ↗
12. M. Lewandowska, J. Mizera, J.W. Wyrzykowski: Mater. Charact., 2000, vol. 45, pp. 195–20210.1016/S1044-5803(00)00074-7 ↗
13. A. Brotzu, M. Cavallini, F. Felli, and M. Marchetti: in Fatigue in the Presence of Corrosion, RTO AVT Work Shop, NATO Report RTO-MP-18 (AC/323(AVT)TP/8), Corfu, Greece, 1998, pp. 8-1–8-12
14. N. Ranganathan, F. Adiwijayanto, J. Petit, J.P. Bailon: Acta Metall. Mater., 1995, vol. 43, pp. 1029–3510.1016/0956-7151(94)00301-W ↗
15. N. Ranganathan, S.Q. Li, J.P. Bailon, J. Petit: Mater. Sci. Eng. A, 1994, vol. 187, pp. 37–4210.1016/0921-5093(94)90328-X ↗
16. G.R. Yoder, P.S. Pao, M.A. Imam, L.A. Cooley: Scripta Metall., 1988, vol. 22, pp. 1241–4410.1016/S0036-9748(88)80139-X ↗
17. Y.J. Ro, S.R. Agnew, R.P. Gangloff: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 3042–6210.1007/s11661-007-9344-x ↗
18. P.J.E. Forsyth, C.A. Stubbington, D. Clarke: J. Inst. Met., 1961–1962, vol. 90, pp. 238–39
19. P.J.E. Forsyth: Acta Metall., 1963, vol. 11, pp. 703–1510.1016/0001-6160(63)90008-7 ↗
20. D.A. Meyn: Trans. ASM, 1968, vol. 61, pp. 42–51
21. G.G. Garrett, J.F. Knott: Acta Metall., 1975, vol. 23, pp. 841–4810.1016/0001-6160(75)90200-X ↗
22. K.R.L. Thompson, J.V. Craig: Metall. Trans., 1970, vol. 1, pp. 1047–4910.1007/BF02811800 ↗
23. A.P. Reynolds, G.E. Stoner: Metall. Trans. A, 1991, vol. 22A, pp. 1849–5510.1007/BF02646509 ↗
24. S.P. Lynch: Corr. Sci., 1982, vol. 22, pp. 925–3710.1016/0010-938X(82)90062-2 ↗
25. C.Q. Bowles, D. Broek: Int. J. Fract., 1972, vol. 8, pp. 75–8510.1007/BF00185199 ↗
26. R.M.N. Pelloux: Trans. ASM, 1969, vol. 62, pp. 281–85
27. A.D.B. Gingell, J.E. King: Acta Mater., 1997, vol. 45, pp. 3855–7010.1016/S1359-6454(97)00033-5 ↗
28. M. Gao, P.S. Pao, R.P. Wei: Metall. Trans. A, 1988, vol. 19A, pp. 1739–5010.1007/BF02645142 ↗
29. K.J. Nix, H.M. Flower: Acta Metall., 1982, vol. 30, pp. 1549–5910.1016/0001-6160(82)90175-4 ↗
30. J.L. Nelson, J.A. Beavers: Metall. Trans. A, 1979, vol. 10A, pp. 658–6210.1007/BF02658333 ↗
31. Y.J. Ro, S.R. Agnew, R.P. Gangloff: Scripta Mater., 2005, vol. 52, pp. 531–3610.1016/j.scriptamat.2004.10.040 ↗
32. C.J. Beevers: Met. Sci., 1977, vol. 11, pp. 362–6710.1179/msc.1977.11.8-9.362 ↗
33. A. Deschamps, F. Livet, Y. Brechet: Acta Mater., 1998, vol. 47, pp. 281–9210.1016/S1359-6454(98)00293-6 ↗
34. B.O. Kong, S.W. Nam: Mater. Lett., 1996, vol. 28, pp. 385–9110.1016/0167-577X(96)00094-8 ↗
35. K.C. Kim, S.W. Nam: Mater. Sci. Eng. A, 1998, vol. 244, pp. 257–6210.1016/S0921-5093(97)00548-0 ↗
36. J.S. Vetrano, S.M. Bruemmer, L.M. Pawlowski, I.M. Robertson: Mater. Sci. Eng. A, 1997, vol. 238, pp. 101–0710.1016/S0921-5093(97)00445-0 ↗
37. Test Method for Measurement of Fatigue Crack Growth Rates, ASTM E647-00, 03.0.1, ASTM International, West Conshocken, PA, 2000, pp. 627–69
38. J.A. Wert, W.M. Robertson: Metallography, 1982, vol. 15, pp. 367–8110.1016/0026-0800(82)90028-3 ↗
39. P.-S. Chen, R.C. Wilcox: Mater. Charact., 1991, vol. 26, pp. 9–1510.1016/1044-5803(91)90003-M ↗
40. J.A. Feeney, J.C. McMillan, R.P. Wei: Metall. Trans., 1970, vol. 1, pp. 1741–5710.1007/BF02642025 ↗
41. R.W. Hertzberg and W.J. Mills: in Fractography—Microscopic Cracking Processes, ASTM STP 600, C.D. Beachem and W.R. Warke, eds., ASTM, Philadelphia, PA, 1976, pp. 220–3410.1520/STP29200S ↗
42. Y.J. Ro, S.R. Agnew, G.H. Bray, R.P. Gangloff: Mater. Sci. Eng. A, 2007, vol. 468–70, pp. 88–97
43. Y.J. Ro, S.R. Agnew, and R.P. Gangloff: 4th Int. Conf. on Very High Cycle Fatigue, J.E. Allison, J.W. Jones, J.M. Larsen, and R.O. Ritchie, eds., TMS-AIME, Warrendale, PA, 2007, pp. 409–20
44. G.H. Bray, M. Glazov, R.J. Rioja, D. Li, R.P. Gangloff: Int. J. Fatigue, 2001, vol. 23, pp. S265–S27610.1016/S0142-1123(01)00159-1 ↗
45. R. Sunder: Fatigue Fract. Eng. Mater. Struct., 2005, vol. 28, pp. 289–30010.1111/j.1460-2695.2005.00857.x ↗
46. F.O. Riemelmoser, P. Gumbsch, R. Pippan: Mater. Trans., 2001, vol. 42, pp. 2–1310.2320/matertrans.42.2 ↗
47. E. Gach and R. Pippan: in Advances in Fracture Research, T. Kishi, Y.-W. Mai, R.O. Ritchie, K. Ravi-Chandar, and A.T. Yokobori, Jr., eds., ICF 10, Elsevier Science, Oxford, United Kingdom, 2001, paper no. ICF100420OR
48. T. Tabata, H.K. Birnbaum: Scripta Metall., 1983, vol. 17, pp. 947–5010.1016/0036-9748(83)90268-5 ↗
49. G.M. Bond, I.M. Robertson, H.K. Birnbaum: Acta Metall., 1987, vol. 35, pp. 2289–9610.1016/0001-6160(87)90076-9 ↗
50. I.M. Robertson: Eng. Fract. Mech., 1999, vol. 64, pp. 649–7310.1016/S0013-7944(99)00094-6 ↗
51. I.M. Robertson: Eng. Fract. Mech., 2001, vol. 68, pp. 671–9210.1016/S0013-7944(01)00011-X ↗
52. P. Sofronis, I.M. Robertson: Philos. Mag. A, 2002, vol. 82, pp. 3405–1310.1080/01418610208240451 ↗
53. P.J. Ferreira, I.M. Robertson, H.K. Birnbaum: Acta Mater., 1999, vol. 47, pp. 2991–9810.1016/S1359-6454(99)00156-1 ↗
54. S.P. Lynch: Acta Metall., 1988, vol. 36, pp. 2639–6110.1016/0001-6160(88)90113-7 ↗
55. S.P. Lynch: Int. Conf. on Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions, N.R. Moody, A.W. Thompson, R. Ricker, G. Was, and R. Jones, eds., TMS, Warrendale, PA, 2002, pp. 449–66
56. R.A. Oriani: Corrosion, 1987, vol. 43, pp. 390–9710.5006/1.3583875 ↗
57. R.A. Oriani: in Stress Corrosion Cracking and Hydrogen Embrittlement of Iron-Base Alloys, R.W. Staehle, J. Hochmann, R.D. McCright, J.E. Slater, eds., NACE, Houston, TX, 1977, pp. 351–57
58. D.A. Koss, K.S. Chan: Acta Metall., 1980, vol. 28, pp. 1245–5210.1016/0001-6160(80)90080-2 ↗
59. E.I. Meletis, R.F. Hochman: Corros. Sci., 1984, vol. 24, pp. 843–6210.1016/0010-938X(84)90123-9 ↗
60. E.I. Meletis, R.F. Hochman: J. Test. Eval., 1984, vol. 12, pp. 142–4810.1520/JTE11064J ↗
61. D.A. Jones, A.F. Jankowski, and G.A. Davidson: Corrosion 97, NACE, Houston, TX, 1997, paper no. 188
62. K.R. Cooper, L.M. Young, R.P. Gangloff, R.G. Kelly: Mater. Sci. Forum, 2000, vol. 331–33, pp. 1625–3310.4028/www.scientific.net/MSF.331-337.1625 ↗
63. H.K. Birnbaum, C. Buckley, F. Zeides, E. Sirois, P. Rozenak, S. Spooner, J.S. Lin: J. Alloys Compd., 1997, vol. 253, pp. 260–6410.1016/S0925-8388(96)02968-4 ↗
64. G.M. Pressouyre: Acta Metall., 1980, vol. 28, pp. 895–91110.1016/0001-6160(80)90106-6 ↗
65. K. Sadananda, A.K. Vasudevan: Int. J. Fatigue, 2004, vol. 26, pp. 39–4710.1016/S0142-1123(03)00105-1 ↗
66. J.C. Grosskreutz, G.G. Shaw: Acta Metall., 1972, vol. 20, pp. 523–2810.1016/0001-6160(72)90008-9 ↗
67. Y.J. Ro: Ph.D. Dissertation, University of Virginia, Charlottesville, VA, 2008
68. V.S. Deshpande, A. Needleman, E. Van der Giessen: Acta Mater., 2003, vol. 51, pp. 4637–5110.1016/S1359-6454(03)00302-1 ↗
69. A. Van der Ven, G. Ceder: Acta Mater., 2004, vol. 52, pp. 1223–3510.1016/j.actamat.2003.11.007 ↗