The influence of minor elements on the weldability of an INCONEL 718-type superalloy
Source abstract
Abstract
The effect of the minor elements C, B, and P on the weldability of the INCONEL 718 alloy was studied. Wrought alloys containing systematic additions of the three minor elements were evaluated by thermal simulation and by electron-beam welding. The ductility recovery temperature from the thermal simulation experiments and the microfissuring behavior in the heat-affected zone (HAZ) of the electron-beam samples were used to evaluate the effect of minor elements on weldability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. W.A. Owczarski, D.S. Duvall, and C.P. Sullivan: Weld. J., 1966, vol. 45 (4), p. 145-s.
2. R.G. Thompson, D.E. Mayo, and B. Radhakrishnan: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 557–67.10.1007/BF02656823 ↗
3. R.G. Thompson, J.R. Dobbs, and D.E. Mayo: Weld. J., 1986, vol. 65, p. 299-s.
4. R.G. Thompson, B. Radhakrishnan, and D.E. Mayo: J. Phys., 1988, Coll. C5, suppl. 10, Tome 49, p. C5-471.10.1051/jphyscol:1988559 ↗
5. T.J. Kelly: Adv. Weld. Sci. Technol., 1986, p. 623.
6. W.F. Savage, E.F. Nippes, and G.M. Goodwin: Weld. J., 1977, Aug, p. 245-s.
7. X. Huang, N.L. Richards, and M.C. Chaturvedi: 3rd Int. SAMPE Metals and Metals Processing Conf., F. Froes, W. Wallace, R. Cull, and E. Struchholt, eds., SAMPE, Toronto, 1992, pp. M231-M242.
8. X. Huang, N.L. Richards, and M.C. Chaturvedi: Metall. Trans. A, 1996, vol. 27A, p. 785.10.1007/BF02648966 ↗
9. X. Huang, M.C. Chaturvedi, N.L. Richards, and J. Jackman: J. Acta Mater., 1997, vol. 48, p. 3095.10.1016/S1359-6454(97)00017-7 ↗
10. H. Guo, M.C. Chaturvedi, and N.L. Richards: Sci. Technol. Weld Join, 2000, vol. 5 (6), p. 1718.
11. W.D. Cao, and R.L. Kennedy: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, p. 463.10.7449/1994/Superalloys_1994_463_477 ↗
12. M.H. Guttman: Phil. Trans. R. Soc., 1980, vol. A295, p. 169.
13. H. Erhart and H.J. Grabke: Met. Sci., 1981, vol. 15, p. 401.10.1016/0036-9748(81)90197-6 ↗
14. M. Paju and R. Moller: Scripta Metall., 1984, vol. 18, p. 813.10.1016/0036-9748(84)90400-9 ↗
15. M. Paju and H.J. Grabke: Mater. Sci. Technol., 1989, vol. 5, p. 148.10.1179/mst.1989.5.2.148 ↗
16. M. Paju: Ph.D. Thesis, Helsinki University of Technology, Helsinki, 1990.
17. N.L. Richards and M.C. Chaturvedi: Int. Mater. Rev., 2000, vol. 45 (3), p. 109.10.1179/095066000101528331 ↗
18. R. Vincent: Acta Metall., 1985, vol. 33 (7), p. 1205.10.1016/0001-6160(85)90231-7 ↗
19. J.A. Horton, C.G. McKamey, and M.K. Miller: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1997, p. 401.10.7449/1997/Superalloys_1997_401_408 ↗
20. Y.E. Glickman, V.F. Kotyshev, Y.I. Cherpakov, and R.E. Bruver: Phys. Met. Metallogr., 1973, vol. 36, p. 126.
21. N. Dupont, C.V. Robino, and A.R. Marder: Weld. J., 1998, Oct., p. 417-S.
22. W. Chen, M.C. Chaturvedi, and N.L. Richards: Metall. Mater. Trans. A, 2001, vol. 32A, p. 931.10.1007/s11661-001-0350-0 ↗