journal article·2002-03

Determination of dislocation densities in HCP metals from X-ray diffraction line-broadening analysis

M. Griffiths, D. Sage, R. A. Holt, C. N. Tome

Publisher page

Abstract

X-Ray diffraction (XRD) line-broadening analysis has been performed on highly textured Zr-2.5Nb specimens which had been deformed in tensile tests to produce well-controlled dislocation structures. An iterative deconvolution method has been applied to extract the broadening function for the material, using as standards, a Zr single crystal and a 0 pct deformed specimen. In both cases, for specific tensile tests, a significant contribution to the basal line broadening was observed, which was clearly not directly related to the dislocation structure generated by the deformation, i.e., so-called c-component dislocations having a component of their Burgers vectors perpendicular to the basal plane. Calculations showed that the extent of basal line broadening cannot be attributed to the secondary effect of strain from a-type dislocations, i.e., dislocations with Burgers vectors parallel with the basal plane. It is concluded that most of the line broadening observed was the result of intergranular strain distributions. These distributions are most prominent for grains oriented with their c-axes perpendicular to the tensile-deformation axis and resulted in basal-plane line broadening even when there were few, if any, c-component dislocations present.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · X-ray Diffraction in Crystallography · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. B.E. Warren and B.L. Averbach: J. Appl. Phys., 1950, vol. 21, p. 595.10.1063/1.1699713 ↗
2. G.K. Williamson and R.E. Smallman: Phil. Mag., 1956, vol. 1, p. 34.10.1080/14786435608238074 ↗
3. M.A. Krivoglaz and K.P. Ryaboshapka: Fiz. Metall., 1963, vol. 15 (1), p. 18.
4. M. Wilkens: Phys. Status Solidi (a), 1970, vol. 2, p. 359.10.1002/pssa.19700020224 ↗
5. M. Wilkens: Proc. 5th Riso Int. Symp. on Metallurgy and Materials Science, N.H. Anderson, ed., Riso National Lab., Roskilde, Denmark, 1984, p. 153.
6. E.N. Aqua and C.M. Owens: Trans. TMS-AIME, 1967, vol. 239, p. 155.
7. M. Griffiths, J.E. Winegar, J.F. Mecke, and R.A. Holt: Adv. X-ray Analysis, 1992, vol. 35, p. 593.
8. B.E. Warren: X-ray Diffraction, Addison-Wesley Publ., Reading, MA, 1969.
9. P. Klimanek and R. Kuzel: J. Appl. Cryst., 1988, vol. 21, p. 59.10.1107/S0021889887009580 ↗
10. R. Kuzel and P. Klimanek: J. Appl. Cryst., 1988, vol. 21, p. 363.10.1107/S002188988800336X ↗
11. R. Kuzel and P. Klimanek: J. Appl. Cryst., 1989, vol. 22, p. 299.10.1107/S0021889889001585 ↗
12. S.R. MacEwen, N. Christodoulou, and A. Salinas-Rodriguez: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 1083–95.10.1007/BF02656529 ↗
13. S. Ergun: J. Appl. Cryst., 1968, vol. 1, p. 19.10.1107/S0021889868004942 ↗
14. M.H. Loretto: Electron Beam Analysis of Materials. Chapman and Hall Publ., London, 1984.10.1007/978-94-009-5540-0 ↗
15. M. Griffiths and J.E. Winegar: Mater. Res. Soc. Symp., 1991, vol. 209, p. 83.10.1557/PROC-209-83 ↗
16. M. Wilkens: Phys. Status Solidi (a), 1987, vol. 104, p. K1.10.1002/pssa.2211040137 ↗
17. A. Akhtar: Acta Metall., 1973, vol. 21, p. 1.10.1016/0001-6160(73)90213-7 ↗
18. J. Weertman and J.A. Weertman: Elementary Dislocation Theory, The MacMillan Co. Publ., London, 1965.
19. M. Wilkens: Fundamental Aspects of Dislocation Theory, National Bureau of Standards Special Publ. 317, R. Bullough, J.A. Simmons, and R. deWit, eds., NBS, Gaithersburg, 1970, vol. II, p. 1195.
20. R.A. Holt, T.M. Holden, A.R. Causey, and V. Fidleris: Proc. 10th Int. Riso Symp., J.B. Bilde-Sorensen, N. Hansen, D. Juul Jensen, T. Leffers, H. Lilholt, O.B. Pedersen, eds., Risø National Lab., Roskilde, Denmark, 1989, p. 383.
21. T.M. Holden, R.A. Holt, and J.W.L. Pang: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 749–55.10.1007/s11661-002-0141-2 ↗
22. M. Griffiths, J.F. Mecke, and J.E. Winegar: 11th Int. Symp. on Zirconium in the Nuclear Industry, ASTM STP 1295, ASTM, Philadelphia, PA, 1996, p. 580.