journal article·2016-05

Theoretical Investigation of Stabilizing Mechanism by Boron in Body-Centered Cubic Iron Through (Fe,Cr)23(C,B)6 Precipitates

Ryoji Sahara, Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi

Publisher page

Abstract

Small amounts of boron improve the mechanical properties in high-chromium ferritic heat-resistant steels. In this work, the stabilizing mechanism by boron in body-centered cubic iron (bcc Fe) through (Fe,Cr)23(C,B)6 precipitates was investigated by first-principles calculations. Formation energy analysis of (Fe,Cr)23(C,B)6 reveals that the compounds become more stable to elemental solids as the boron concentration increases. Furthermore, the interface energy of bcc Fe(110) || Fe23(C,B)6(111) also decreases with boron concentration in the compounds. The decreased interface energy caused by boron addition is explained by the balance between the change in the phase stability of the precipitates and the change in the misfit parameter for the bcc Fe matrix and the precipitates. These results show that boron stabilizes the microstructure of heat-resistant steels, which is important for understanding the origins of the creep strength in ferritic steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. M. Fukuda: J. Jpn. Soc. Mech. Eng., 2011, vol. 114, pp. 244–47. (in Japanese).
2. H. Kushima, K. Kimura, and F. Abe: Tetsu-to-Hagane, 1999, vol. 85, pp. 841–47. (in Japanese).10.2355/tetsutohagane1955.85.11_841 ↗
3. H.G. Armaki, R. Chen, K. Maruyama, and M. Igarashi: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3084–94.10.1007/s11661-011-0726-8 ↗
4. J. Hald and L. Korcakova: ISIJ Int., 2003, vol. 43, pp. 420–27.10.2355/isijinternational.43.420 ↗
5. K.H. Kuo and C.L. Jia: Acta Metall., 1985, vol. 33, pp. 991–96.10.1016/0001-6160(85)90193-2 ↗
6. A. Kipelova, A. Belyakov, and R. Kaibyshev: Philos. Mag., 2013, vol. 93, pp. 2259–68.10.1080/14786435.2013.765995 ↗
7. K. Maruyama, K. Sawada, and J. Koike: ISIJ Int., 2001, vol. 41, pp. 641–53.10.2355/isijinternational.41.641 ↗
8. N. Takahashi, T. Fujita, and T. Yamada: Tetsu-to-Hagane, 1975, vol. 61, pp. 2263–73 (in Japanese).10.2355/tetsutohagane1955.61.9_2263 ↗
9. M. Tabuchi, H. Hongo, and F. Abe: Metall. Mater. Trans. A, 204, vol. 45A, pp. 5068–75.10.1007/s11661-014-2471-2 ↗
10. M. Hättestrand and H.-O. Andrén: Mater. Sci. Eng. A, 1999, vol. 270, pp. 33–37.10.1016/S0921-5093(99)00232-4 ↗
11. M. Matsui, M. Tabuchi, T. Watanabe, K. Kubo, J. Kinugawa, and F. Abe: ISIJ Int., 2001, vol. 41, pp. S126–30.10.2355/isijinternational.41.Suppl_S126 ↗
12. S. Hashimoto, S. Doi, K. Takahashi, M. Terasaka, and M. Iwaki: Mater. Sci. Eng. A, 1987, vol. 90, pp. 119–25.10.1016/0025-5416(87)90202-3 ↗
13. M.F. Ashby, J. Harper, and J. Lewis: Trans. Metall. Soc. AIME, 1969, vol. 245, pp. 413–20.
14. C.L. Briant and R.P. Messmer, Philos. Mag. B, 1980, vol. 42, pp. 569–76.10.1080/01418638008227298 ↗
15. R.P. Messmer and C.L. Briant: Acta Metall., 1982, vol. 30, pp. 457–67.10.1016/0001-6160(82)90226-7 ↗
16. S. Crampin, D.D. Vvedensky, J.M. MacLaren, and M.E. Eberhart: Phys. Rev. B, 1989, vol. 40, pp. 3413–16.10.1103/PhysRevB.40.3413 ↗
17. J.R. Rice and J.-S. Wang: Mater. Sci. Eng. A, 1989, vol. 107, pp. 23–40.10.1016/0921-5093(89)90372-9 ↗
18. G.L. Krasko and G.B. Olson: Solid State Commun., 1990, vol. 76, pp. 247–51.10.1016/0038-1098(90)90832-V ↗
19. R. Wu, A.J. Freeman, and G.B. Olson: J. Mater. Res., 1992, vol. 7, pp. 2403–11.10.1557/JMR.1992.2403 ↗
20. R. Wu, A.J. Freeman, and G.B. Olson: Science, vol. 265, pp. 376–80.10.1126/science.265.5170.376 ↗
21. R. Wu, A.J. Freeman, and G.B. Olson: Phys. Rev. B, 1994, vol. 50, pp. 75–81.10.1103/PhysRevB.50.75 ↗
22. R. Wu, A.J. Freeman, and G.B. Olson: Phys. Rev. B, 1996, vol. 53, pp. 7504–09.10.1103/PhysRevB.53.7504 ↗
23. C.M. Fang, M.H.F. Sluiter, M.A. van Huis, C.K. Ande, and H.W. Zandbergen: Phys. Rev. Lett., 2010, vol. 105, pp. 055503 (4pp)10.1103/PhysRevLett.105.055503 ↗
24. C.M. Fang, M.A. van Huis, M.H.F. Sluiter, and H.W. Zandbergen: Acta Mater., 2010, vol. 58, pp. 2968–77.10.1016/j.actamat.2010.01.025 ↗
25. N.I. Medvedeva, D.C. Van Aken, and J.E. Medvedeva: Comput. Mater. Sci., 2015, vol. 96, pp. 159–64.10.1016/j.commatsci.2014.09.016 ↗
26. J.Y. Xie, N.X. Chen, L.D. Tang, and S. Seetharaman: Acta Mater., 2005, vol. 53, pp. 5305–12.10.1016/j.actamat.2005.07.039 ↗
27. M. Yamaguchi: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 319–329.10.1007/s11661-010-0381-5 ↗
28. S-.Y. Wang, C.-Y. Wang, D.-L. Zhao: J. Alloys Compds., 2004, vol. 368, pp. 308–11.10.1016/j.jallcom.2003.06.002 ↗
29. J. Hartford: Phys. Rev. B, 2000, vol. 61, pp. 2221–29.10.1103/PhysRevB.61.2221 ↗
30. H. Sawada, S. Taniguchi, K. Kawakami, and T. Ozaki: Model. Simul. Mater. Sci. Eng., 2013, vol. 21, 045012 (12pp)10.1088/0965-0393/21/4/045012 ↗
31. P.E. Blöchl: Phys. Rev. B, 1994, vol. 50, pp. 17953–79.10.1103/PhysRevB.50.17953 ↗
32. G. Kresse and D. Joubert: Phys. Rev. B, 1999, vol. 59, pp. 1758–75.10.1103/PhysRevB.59.1758 ↗
33. G. Kresse and J. Hafner: Phys. Rev. B, 1993, vol. 47, pp. 558–61.10.1103/PhysRevB.47.558 ↗
34. G. Kresse and J. Furthmüller, Phys. Rev. B, 1996, vol. 54, pp. 11169–8610.1103/PhysRevB.54.11169 ↗
35. J.P. Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, pp. 3865–68.10.1103/PhysRevLett.77.3865 ↗
36. A. Masago, K. Shirai, and H. Katayama-Yoshida: Phys. Rev. B, 2006, vol. 73, 104102 (10pp)10.1103/PhysRevB.73.104102 ↗
37. M.J. van Setten, M.A. Uijttewaal, G.A. de Wijs, R.A. de Groot: J. Am. Chem. Soc., 2007, vol. 129, pp. 2458–65.10.1021/ja0631246 ↗
38. M. Widom, M. Mihalkovič: Phys. Rev. B, 2008, vol. 77, 064113 (8pp)10.1103/PhysRevB.77.064113 ↗
39. A. Zunger, S.-H. Wei, L.G. Ferreira, and J.E. Bernard: Phys Rev. Lett., 1990, vol. 65, pp. 353–56.10.1103/PhysRevLett.65.353 ↗
40. S.-H. Wei, L.G. Ferreira, J.E. Bernard, and A. Zunger: Phys Rev. B, 1990, vol. 42, pp. 9622–49.10.1103/PhysRevB.42.9622 ↗
41. A. van de Walle, and G. Ceder: J. Phase. Eq., 2002, vol. 23, pp. 348–59.10.1361/105497102770331596 ↗
42. A. van de Walle, P. Tiwary, M.M. de Jong, D.L. Olmsted, M.D. Asta, A. Dick, D. Shin, Y. Wang, L.-Q. Chen, and Z.-K. Liu: Calphad J., 2013, vol. 42, pp. 13–18.10.1016/j.calphad.2013.06.006 ↗
43. R. Sahara, S. Emura, S. Ii, S. Ueda, and K. Tsuchiya: Sci. Technol. Adv. Mater., 2014, vol. 15, 035014 (9pp)10.1088/1468-6996/15/3/035014 ↗
44. R. Sahara, S. Emura, and K. Tsuchiya: J. Alloys Compd., 2015, vol. 634, pp. 193–99.10.1016/j.jallcom.2015.02.005 ↗