journal article·2014-07

Mechanical Properties Anisotropy of Cold-Rolled and Solution-Annealed Ni-Based Hastelloy C-276 Alloy

K. K. Mehta, Prantik Mukhopadhyay, R. K. Mandal, A. K. Singh

Publisher page

Abstract

This work describes a correlation among texture, in-plane anisotropy in tensile properties, and yield locus in Ni-based Hastelloy C-276 alloy. The alloy exhibits moderate values of in-plane anisotropy and anisotropy index, which has been attributed to the presence of moderate overall intensity of texture. The alloy displays two slopes in true plastic stress–strain curve and follows a Ludwigson relation. At low plastic strains, the sample displays the presence of annealing twins and less strain localization at grain boundaries, while the formation of deformation twins and high strain localization within the deformation twins and at the grain boundaries are observed in a high-strained region. The 45-deg and 67.5-deg orientation samples show relatively low ductility and low work-hardening exponent. This has been explained based on dislocation storage capacity and dynamic recovery coefficient using Kock–Mecking–Estrin analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. E.F. Bradley: Superalloys: A Technical Guide, ASM International, Materials Park, OH, 1988.
2. C.T. Sims: Superalloy II, Wiley, New York, NY, 1987.
3. M.J. Donachie: Superalloys, American Society for Metals, ASM International, Materials Park, OH, 1984.
4. M.J. Cieslak, T.J. Headley, and A.D. Romig, Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 2035-47.10.1007/BF02645001 ↗
5. J. Lu, E.S. Choi, and H.D. Zhou: J. Appl. Phys., 2008, vol. 103, pp. 64908-13.10.1063/1.2899058 ↗
6. K. Ankamma, D.V.V. Satyanarayana, G.C.M. Reddy, M. Komaraiah, and N.E. Prasad: Sadhana, 2011, vol. 36, pp. 223-49.10.1007/s12046-011-0016-6 ↗
7. K. Ankamma, A.K. Singh, K.S. Prasad, G.C. M. Reddy, M. Komaraiah, and N.E. Prasad: Int. J. Mater. Res., 2011, vol. 102, pp. 1274-85.10.3139/146.110573 ↗
8. R.G. Wheeler and D.R. Ireland: Electrochem. Technol., 1966, vol. 4, pp. 313-7.
9. L.G. Schultz: J. Appl. Phys., 1949, vol. 20, pp. 1030-3.10.1063/1.1698268 ↗
10. D. Lee and W.A. Backofen: Trans. AIME, 1966, vol. 236, pp. 1696-704.
11. D. Lee: in Science of Hardness Testing and its Research Applications, J.H. Westbrook and H. Conrad, eds., ASM International, Materials Park, OH, 1973, p. 147.
12. F.J. Humphreys and M. Hatherly: Recrystallisation and Related Phenomena, Elsevier Ltd., Oxford, U.K., 2004.
13. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, Singapore, 1988.
14. R.J. Rioja and J. Liu: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3325-37.10.1007/s11661-012-1155-z ↗
15. C. Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2764-77.10.1007/s11661-013-1678-y ↗
16. C. Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay: Mater. Sci. Eng. A, 2013, vol. 577, pp. 87-100.10.1016/j.msea.2013.03.079 ↗
17. K.V. Jata, A.K. Hopkins, and R.J. Rioja: Mater. Sci. Forum, 1996, vols. 217-22, pp. 647-52.10.4028/www.scientific.net/MSF.217-222.647 ↗
18. S. Banumathy, R.K. Mandal, and A.K. Singh: Int. J. Mater. Res., 2011, vol. 102, pp. 208-17.10.3139/146.110468 ↗
19. Y.T. Wu and C.H. Koo: Scripta Metall., 1998, vol. 38, pp. 267-71.10.1016/S1359-6462(97)00431-4 ↗
20. D.C. Ludwigson: Metall. Trans., 1971, vol. 2, pp. 2825-8.10.1007/BF02813258 ↗
21. F.A. McClintock: J. Appl. Mech., 1968, vol. 90, pp. 363-71.10.1115/1.3601204 ↗
22. C. Keller, E. Hug, and G. Chateigner: Mater. Sci. Eng. A, 2009, vol. 500, pp. 207-15.10.1016/j.msea.2008.09.054 ↗
23. U.F. Kocks and H. Mecking: Progr. Mater. Sci., 2003, vol. 48, 171-273.10.1016/S0079-6425(02)00003-8 ↗
24. M. Tiryakioglu and N.D. Alexopoulos: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2772-80.10.1007/s11661-008-9611-5 ↗
25. U.F. Kocks: J. Eng. Mater. Tech. Trans. ASME, 1976, vol. 98. pp. 76-85.10.1115/1.3443340 ↗
26. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865-75.10.1016/0001-6160(81)90112-7 ↗
27. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57-70.10.1016/0001-6160(84)90202-5 ↗
28. U. Essmann and H. Mughrabi: Phil. Mag. A, 1979, vol. 40, pp. 731-56.10.1080/01418617908234871 ↗
29. T. Narutani and J. Takamura: Acta. Metall., 1991, vol. 39, pp. 2037-49.10.1016/0956-7151(91)90173-X ↗
30. J.E. Flinn, D.P. Field, G.E. Korth, T.M. Lillo, and J. Macheret: Acta. Mater., 2001, vol. 49, pp. 2065-74.10.1016/S1359-6454(01)00102-1 ↗