journal article·2007-08

The Relationship between the Microstructure and Abrasive Resistance of a Hardfacing Alloy in the Fe-Cr-C-Nb-V System

E.O. Correa, N.G. Alcântara, D.G. Tecco, R.V. Kumar

Publisher page

Abstract

The relationship between abrasive wear resistance and microstructure of a hardfacing alloy based on the Fe-Cr-C-Nb-V system was investigated. This material was developed for cladding, by an open arc welding technique, of components subjected to severe abrasive wear. The work undertaken included the solidification study, microstructural characterization, and abrasion testing. Microstructural examinations of hardfaced layer showed that the microstructure of the alloy consisted of a large volume fraction of primary niobium carbides randomly dispersed in a metastable austenitic matrix containing fine M3C carbides and “islands” of eutectic mixture of γ/M7C3. Energy dispersive X-ray analysis results showed that V preferentially partitioned into the NbC and M3C phases. In comparison with the conventional high carbon/high chromium hardfacing alloy with higher hardness, a Fe-Cr-C-Nb-V hardfacing alloy exhibited improved abrasive wear resistance and a microstructure with higher toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Metals Handbook, vol. 6, Welding, Brazing and Soldering, 9th ed., ASM, Metals Park, OH, 1983, pp. 771–803
2. S. Atamert, H.K.D.H. Bhadeshia: Mater. Sci. Eng., 1990, vol. 130, pp. 101–1110.1016/0921-5093(90)90085-H ↗
3. S. Lee, S.H. Choo, E.R. Baek, S. Ahn, N.J. Kim: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3881–9110.1007/BF02595637 ↗
4. F. Scandella, R. Scandella: Mater. Sci. Technol., 2004, vol. 20, pp. 93–10510.1179/026708304225011234 ↗
5. User’s Guide to MT-DATA 4.70, National Physical Laboratory (NPL), Teddington, United Kingdom, 2004
6. ASTM Standard G65-01, ASTM, Philadelphia, PA, 2001
7. R. Kesri, M.D. Charre: J. Mater. Sci., 1987, vol. 22, pp. 2959–6410.1007/BF01086497 ↗
8. S Atamert: Ph.D. Thesis, The University of Cambridge, Cambridge, United Kingdom, 1988, pp. 149–77
9. S. Wei, J. Zhu, L. Xu: Tribol. Int., 2006, vol. 39, pp. 641–4810.1016/j.triboint.2005.04.035 ↗
10. Metals Handbook, vol. 8, Metallography and Phase Diagrams, 9th ed., ASM, Metals Park, OH, 1983, p. 402
11. R. Menon: Weld. J., 2002, vol. 81, pp. 53–58
12. H. Oh, S. Lee, J.Y. Jung, S. Ahn: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 515–2410.1007/s11661-001-0068-z ↗
13. L. Xu, J. Xing, S. Wei, Y. Zhang, R. Long: Mater. Sci. Eng. A, 2006, vol. 434, pp. 63–7010.1016/j.msea.2006.07.047 ↗
14. H.X. Chen, Z.C. Chang, J.C. Lu, H.T. Lin: Wear, 1993, vol. 166, pp. 197–200110.1016/0043-1648(93)90262-K ↗
15. S. Chatterjee, T.K. Pal: Wear, 2003, vol. 255, pp. 417-2510.1016/S0043-1648(03)00101-7 ↗
16. D.K. Dwivedi: Mater. Sci. Technol., 2004, vol. 20, pp. 1326–3010.1179/026708304225017418 ↗
17. L. Xu, J. Xing, S. Wei, Y. Zhang, and R. Long: Wear, 2006, WEA-98030, in press
18. D. Sun, W. Wang, Z. Xuan, and Z. Ren: China Weld., 2003
19. R. Colaço, R. Vilar: Wear, 2005, vol. 258, pp. 225–3110.1016/j.wear.2004.09.029 ↗
20. J.T. Xi, Q.D. Zhou, S.H. Liu, G.S. Song: Wear, 1993, vols. 162–164, pp. 83–88
21. K.H. Zum Gahr, D.V. Doane: Metall. Trans. A, 1980, vol. 11A, pp. 613–2010.1007/BF02670698 ↗
22. L.C. Cheng, T.B. Wu, C.T. Hu: J. Mater. Sci., 1988, vol. 23, pp. 1610–1410.1007/BF01115699 ↗