Formation of Bimodal-Sized Structure and Its Tensile Properties in a Warm-Rolled and Annealed Ultrafine-Grained Ferrite/Cementite Steel
Source abstract
Abstract
An ultrafine-grained ferrite/cementite (UGF/C) steel with a local high density of cementite particles was fabricated through caliber-warm-rolling followed by annealing and resulted in a bimodal-sized microstructure. The characteristic bimodal-sized microstructure was attributed to the original ferrite-pearlite structure and cementite spacing, and reflected the original ferrite-pearlite structure. The smaller-sized clusters corresponded to the former pearlite regions and the larger-sized clusters to the proeutectoid ferrite regions. The cementite particles naturally localized within the former pearlite region. Most of the ferrite coarsening did not occur until the cementite particle spacing reached a critical value. The UGF/C microstructure with a bimodal grain size showed a yield strength elongation combination that was better than conventional ferrite pearlite steels, and is a significant improvement as a result of the processing and resultant microstructure. The Hall–Petch relationship was best demonstrated when the yield strength was correlated to the average size (determined from the two inverse grain sizes that were normalized by the area fractions) rather than the larger or smaller size of the bimodal distribution, which reflected the strengthening effect of the subgrained structure. The grain refinement contributed to the athermal component of the yield strength but hardly affected its thermal component.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A. Ohmori, S. Torizuka, K. Nagai, N. Koseki, Y. Kogo: Mater. Trans., 2004, vol. 45, pp. 2224–3110.2320/matertrans.45.2224 ↗
2. R. Song, D. Ponge, D. Raabe, J.G. Speer, D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441A, pp. 1–1710.1016/j.msea.2006.08.095 ↗
3. M.C. Zhao, T. Hanamura, H. Qiu, K. Nagai, K. Yang: Scripta Mater., 2006, vol. 54, pp. 1193–9710.1016/j.scriptamat.2005.11.032 ↗
4. F.X. Yin, T. Hanamura, T. Inoue, K. Nagai: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 665–7710.1007/s11661-004-0378-z ↗
5. M.C. Zhao, T. Hanamura, H. Qiu, F. Yin, H. Dong, K. Yang, K. Nagai: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2897–90010.1007/BF02586122 ↗
6. P.D. Hodgson, M.R. Hickson, R.K. Gibbs: Scripta Mater., 1999, vol. 40, pp. 1179–8410.1016/S1359-6462(98)00411-4 ↗
7. C.H. Xiao, R.A. Mirshams, S.H. Whang, W.M. Yin: Mater. Sci. Eng. A, 2001, vol. 301A, pp. 35–4310.1016/S0921-5093(00)01392-7 ↗
8. M.C. Zhao, F. Yin, T. Hanamura, K. Nagai, A. Atrens: Scripta Mater., 2007, vol. 57, pp. 857–6010.1016/j.scriptamat.2007.06.062 ↗
9. N. Tsuji, Y. Ito, Y. Saito, Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–9910.1016/S1359-6462(02)00282-8 ↗
10. C.C. Koch, D.G. Morris, K. Lu, A. Inoue: MRS Bull., 1999, vol. 24, pp. 54–5810.1557/S0883769400051551 ↗
11. K.T. Park, Y.S. Kim, D.H. Shin: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2373–8110.1007/s11661-001-0211-x ↗
12. Y. Wang, M. Chen, F. Zhou, E. Ma: Nature, 2002, vol. 419, pp. 912–1510.1038/nature01133 ↗
13. M.C. Zhao, T. Hanamura, H. Qiu, K. Nagai, K. Yang: Scripta Mater., 2006, vol. 54, pp. 1385–8910.1016/j.scriptamat.2005.11.067 ↗
14. A. Ohmori, S. Torizuka, K. Nagai, N. Koseki: ISIJ Int., 2004, vol. 44, pp. 1063–7110.2355/isijinternational.44.1063 ↗
15. R. Song, D. Ponge, D. Raabe: Scripta Mater., 2005, vol. 52, pp. 1075–8010.1016/j.scriptamat.2005.02.016 ↗
16. N. Tsuji, T. Toyoda, Y. Minamino, Y. Koizumi, T. Yamane, M. Komatsu, M. Kiritani: Mater. Sci. Eng. A, 2003, vol. 350A, pp. 108–1610.1016/S0921-5093(02)00709-8 ↗
17. E. Hornbogen: Metall. Mater. Trans. A, 1979, vol. 10A , pp. 947–7210.1007/BF02811643 ↗
18. E. Nes: in Superplasticité, B. Baudelet, M. Surey, eds., Centre National de la Recherche Scientifique, Paris, 1985, p. 7.1
19. R. Doherty, R. Cahn: J. Less-Common Met., 1972, vol. 28, p. 27910.1016/0022-5088(72)90131-2 ↗
20. T. Tanaka, N. Tabata, T. Watomura, C. Shiga: in Microalloying ’75, M. Korchynsky, ed., Union Carbide, New York, NY, 1977, p. 107
21. M.C. Zhao, K. Yang, Y.Y. Shan: Mater. Sci. Eng. A, 2002, vol. 335A, pp. 14–2010.1016/S0921-5093(01)01904-9 ↗
22. M.C. Zhao, K. Yang, Y.Y. Shan: Mater. Lett., 2003, vol. 57, pp. 1496–150010.1016/S0167-577X(02)01013-3 ↗
23. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, Maney Publishing, London, 2002, p. 291
24. T. Gladman, D. Dulieu, I.D. Mcivor: in Microalloying ’75, M. Korchynsky, ed., Union Carbide, New York, NY, 1977, p. 32
25. H.K.D.H. Bhadeshia: Bainite in Steels, The Institute of Materials, London, 1992, p. 30
26. F.X. Yin, T. Hanamura, O. Umezawa, K. Nagai: Mater. Sci. Eng. A, 2003, vol. 354A, pp. 31–3910.1016/S0921-5093(02)00766-9 ↗
27. D.H. Shin, K.T. Park, Y.S. Kim: Scripta Mater., 2003, vol. 48, pp. 469–7310.1016/S1359-6462(02)00512-2 ↗
28. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, Maney Publishing, London, 2002, p. 202
29. M.C. Zhao, T. Hanamura, H. Qiu, K. Yang: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1657–6410.1007/s11661-006-0107-x ↗
30. T. Hanamura, F.X. Yin, K. Nagai: ISIJ Int., 2004, vol. 44, pp. 610–1710.2355/isijinternational.44.610 ↗
31. N. Tsuchida, Y. Tomota, K. Nagai: Tetsu-to-Hagané, 2003, vol. 89, pp. 1170–7710.2355/tetsutohagane1955.89.11_1170 ↗
32. T. Tsuchiyama, H. Uchida, K. Kataoka, S. Takaki: ISIJ Int., 2002, vol. 42, pp. 1438–4310.2355/isijinternational.42.1438 ↗
33. N. Tsuchida, Y. Tomota, K. Nagai: ISIJ Int., 2002, vol. 42, pp. 1594–9610.2355/isijinternational.42.1594 ↗