Oxide defects in a vacuum investment-cast ni-based turbine blade
Source abstract
Abstract
Samples from large turbine blades for power generation, investment-cast in vacuum from a nickel-based superalloy, were investigated. Samples were cut from regions near the top of the casting that contained freckle defects. The microstructures of these segregated regions were compared with those from nonsegregated adjacent regions using both optical microscopy and scanning electron microscopy (SEM). The segregated areas revealed a high density of carbides and a network of cracks. Samples were prepared by carefully fracturing along the cracks so as to observe the surfaces of the cracks. Observation by SEM revealed the presence of inclusions identified as films that appeared to have initiated the growth of carbides. Fractures of random areas of the nonsegregated alloy revealed that the films were numerous and widely distributed. In all cases, the films were principally oxides (and/or possibly nitrides) of aluminum and chromium. It was hypothesized that the films had originated by entrainment of the surface film on the liquid metal during the turbulent pouring of the casting. The films could, therefore, be assumed to be double, because the entrainment mechanism is a folding action. It follows that the doubled-over films constitute (1) the observed cracks and (2) the substrates for carbide precipitation. Evidence from other alloy systems is presented to support this conclusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. J. Campbell: Castings, 2nd ed., Butterworth Heinemann, Oxford, United Kingdom, 2003.
2. M. Cox, M. Wickins, J.P. Kuang, R.A. Harding, and J. Campbell: Mater. Sci. Technol., 2000, vol. 16, pp. 1445–52.10.1179/026708300101507442 ↗
3. M. Cox, M. Wickins, R.A. Harding, and J. Campbell: 1998, unpublished work, quoted in Ref. 1, p. 61.
4. M. Divandari and J. Campbell: Trans. Am. Foundry Soc., 2001, vol. 109, pp. 201–12.
5. X. Cao and J. Campbell: Trans. Am. Foundry Soc., 2001, vol. 109, pp. 269–83.
6. X. Cao and J. Campbell: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1409–20.10.1007/s11661-003-0253-3 ↗
7. S.G. Shabestari, M. Mahmudi, M. Emamy, and J. Campbell: Int. J. Cast Met. Res., 2002, vol. 15, pp. 17–24.10.1080/13640461.2002.11819459 ↗
8. S.M. Miresmaeili, W.D. Griffiths, J. Campbell, S.G. Shabestari, and S.M.A. Boutorabi: unpublished research, 2003.
9. J. Campbell: Review: Developments in Filling System Designs, CIATF Technical Forum, Stratford, United Kingdom, June 1997.
10. J. Campbell: Castings Practice, Butterworth Heinemann, Oxford, United Kingdom, 2004.