journal article·2014-09Open access

Influence of Minor Alloying Elements on Selective Oxidation and Reactive Wetting of CMnSi TRIP Steel during Hot Dip Galvanizing

Lawrence Cho, Myung Soo Kim, Young Ha Kim, Bruno C. De Cooman

Abstract

The influence of the addition of minor alloying elements on the selective oxidation and the reactive wetting of CMnSi transformation-induced plasticity (TRIP) steels was studied by means of galvanizing simulator tests. Five TRIP steels containing small alloying additions of Cr, Ni, Ti, Cu, and Sn were investigated. After intercritical annealing (IA) at 1093 K (820 °C) in a N2 + 5 pct H2 gas atmosphere with a dew point of 213 K (−60 °C), two types of oxides were formed on the strip surface: Mn-rich xMnO·SiO2 (x > 1.5) and Si-rich xMnO·SiO2 (x < 0.3) oxides. The addition of the minor alloying elements changed the morphology of the Si-rich oxides from a continuous film to discrete islands and this improved the wettability by molten Zn. The improved wetting effect of the minor alloying elements was attributed to an increased area fraction of the surface where the oxides were thinner, enabling a direct unhindered reaction between Fe and the Al in the liquid Zn and the formation of the inhibition layer during the hot dip galvanizing. The addition of a small amount of Sn is shown to significantly decrease the density of Zn-coating defects on CMnSi TRIP steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Y.F. Gong, H.S. Kim, B.C. De Cooman: ISIJ international, 2008, vol. 48, pp. 1745-51.10.2355/isijinternational.48.1745 ↗
2. Y.F. Gong, H.S. Kim, B.C. De Cooman: ISIJ international, 2009, vol. 49, pp. 557-63.10.2355/isijinternational.49.557 ↗
3. L. Cho, S. Lee, M. Kim, Y. Kim, B.C. De Cooman: Metallurgical and Materials Transactions A, 2013, vol. 44A, pp. 362-71.10.1007/s11661-012-1392-1 ↗
4. K.K. Wang, C.W. Hsu, L. Chang, D. Gan, K.C. Yang: Applied surface science, 2013, vol. 285, pp. 458-68.10.1016/j.apsusc.2013.08.077 ↗
5. I. Cvijović, I. Parezanović, M. Spiegel: Corrosion Science, 2006, vol. 48, pp. 980-93.10.1016/j.corsci.2005.02.022 ↗
6. H. Liu, F. Li, W. Shi, S. Swaminathan, Y. He, M. Rohwerder, L. Li: Surface and Coatings Technology, 2012, vol. 206, pp. 3428-36.10.1016/j.surfcoat.2012.02.001 ↗
7. E.M. Bellhouse, J.R. McDermid: Metallurgical and Materials Transactions A, 2010, vol. 41, pp. 1539-53.10.1007/s11661-010-0192-8 ↗
8. L. Cho, M.S. Kim, Y.H. Kim, S.J. Lee, B.C. De Cooman: Proceedings of the 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH 2011), Genova, Italy, 2011, Associazione Italiana di Metallurgia, pp. 145–52.
9. R. Nakanishi, H. Irie, M. Nakamura, K. Okamoto, and M. Shimizu: European Patent, EP 1829 983 (A1), 2007.
10. L. Bordignon, X.V. Eynde, R. Franssen: Revue de Métallurgie, 2004, vol. 101, pp. 559-68.10.1051/metal:2004124 ↗
11. M. Blumenau, M. Norden, F. Friedel, K. Peters: Surface and Coatings Technology, 2011, vol. 206, pp. 559-67.10.1016/j.surfcoat.2011.07.088 ↗
12. Y.F. Gong, B.C. De Cooman: ISIJ international, 2011, vol. 51, pp. 630-37.10.2355/isijinternational.51.630 ↗
13. Y.I. Choi, W.J. Beom, C.J. Park, D. Paik, M.H. Hong: Metallurgical and Materials Transactions A, 2010, vol. 41, pp. 3379-85.10.1007/s11661-010-0427-8 ↗
14. R. Sanguanmoo, E. Nisaratanaporn, Y. Boonyongmaneerat: Corrosion Science 2011, vol. 53, pp. 122-26.10.1016/j.corsci.2010.09.031 ↗
15. T. Matsumoto: CAMP-ISIJ, 1991, vol. 4, pp. 1632.
16. Z.T. Zhang, I.R. Sohn, F.S. Pettit, G.H. Meier, S. Sridhar: Metallurgical and Materials Transactions B, 2009, vol. 40, pp. 567-84.10.1007/s11663-009-9255-x ↗
17. E. Clauberg, C. Uebing, H. Grabke: Applied surface science, 1999, vol. 143, pp. 206-14.10.1016/S0169-4332(98)00891-5 ↗
18. G. Lyudkovsky: United States Patent, No. 4,421,574, 1983.
19. A. Ruck, D. Monceau, H.J. Grabke: Steel research, 1996, vol. 67, pp. 240-46.10.1002/srin.199605484 ↗
20. M. Seah: Acta Metallurgica, 1980, vol. 28, pp. 955-62.10.1016/0001-6160(80)90112-1 ↗
21. N. Tsai, G. Pound, F.F. Abraham: Journal of Catalysis, 1977, vol. 50, pp. 200-02.10.1016/0021-9517(77)90026-4 ↗
22. D.R. Lide: CRC Handbook of chemistry and physics, 86th ed., CRC Press, Boca Raton, 2005.
23. H.G. Lee: Chemical Thermodynamics for Metals and Materials, Imperial College Press, London, 1999.10.1142/p152 ↗
24. Y. Suzuki, T. Yamashita, Y. Sugimoto, S. Fujita, S. Yamaguchi: ISIJ international, 2009, vol. 49, pp. 564-73.10.2355/isijinternational.49.564 ↗
25. T. Iung, O. Faral, M. Faral, M. Babbit, and C. Issartel: United States Patent 6328826 B1, 2001.
26. K. Takashima, Y. Toji, and K. Hasegawa: United States Patent 20130340898 A1, 2013.
27. D. Melford: Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1980, vol. 295, pp. 89-103.10.1098/rsta.1980.0078 ↗
28. D. Huin, P. Flauder, J.B. Leblond: Oxid Met, 2005, vol. 64, pp. 131-67.10.1007/s11085-005-5718-x ↗
29. S. Alibeigi, R. Kavitha, R.J. Meguerian, J.R. McDermid: Acta Mater, 2011, vol. 59, pp. 3537-49.10.1016/j.actamat.2011.02.027 ↗
30. D. Sain, G. Belton: Metallurgical Transactions B, 1978, vol. 9, pp. 403-07.10.1007/BF02654414 ↗
31. H.J. Grabke: Kovine zlitine tehnologije, 1996, vol. 30, pp. 483–95.
32. H. Grabke, R. Dennert, B. Wagemann: Oxid Met, 1997, vol. 47, pp. 495-506.10.1007/BF02134788 ↗
33. Y.Y. Zhang, Y.Y. Zhang, F.H. Yang, Z.T. Zhang: Journal of Iron and Steel Research, International, 2013, vol. 20, pp. 39-56.10.1016/S1006-706X(13)60067-9 ↗
34. N. Gao, D.Y.H. Liu, N. Tang, R.B. Park, and M.S. Kim: Proceedings of the 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH 2011), Genova, Italy, 2011, Associazione Italiana di Metallurgia, pp. 123–30.
35. R. Kavitha, J.R. McDermid: Surface and Coatings Technology, 2012, vol. 212, pp. 152-58.10.1016/j.surfcoat.2012.09.038 ↗
36. N. Kaiser: Applied optics, 2002, vol. 41, pp. 3053-60.10.1364/AO.41.003053 ↗
37. F. Matsuno, S. Nishikida: Tetsu-to-Hagane, 1982, vol. 68, pp. 301 - 08.10.2355/tetsutohagane1955.68.2_301 ↗