A Study on the Oxidation Behavior of Nb Alloy (Nb-1 pct Zr-0.1 pct C) and Silicide-Coated Nb Alloys
Source abstract
Abstract
In the current work, silicide coatings were produced on the Nb alloy (Nb-1 pct Zr-0.1 pct C) using the halide activated pack cementation (HAPC) technique. Coating parameters (temperature and time) were optimized to produce a two-layer (Nb5Si3 and NbSi2) coating on the Nb alloy. Subsequently, the oxidation behavior of the Nb alloy (Nb-1 pct Zr-0.1 pct C) and silicide-coated Nb alloy was studied using thermogravimetric analysis (TGA) and isothermal weight gain oxidation experiments. Phase identification and morphological examinations were carried out using X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. TGA showed that the Nb alloy started undergoing accelerated oxidation at and above 773 K (500 °C). Isothermal weight gain experiments carried out on the Nb alloy under air environment at 873 K (600 °C) up to a time period of 16 hours exhibited a linear growth rate law of oxidation. In the case of silicide-based coatings, TGA showed that oxidation resistance of silicide coatings was retained up to 1473 K (1200 °C). Isothermal weight gain experiments on the silicide coatings carried out at 1273 K (1000 °C) in air showed that initially up to 8 hours, the weight of the sample increased, and beyond 8 hours the weight of the sample remained constant. The oxide phases formed on the bare samples and on the coated samples during oxidation were found to be Nb2O5 and a mixture of SiO2 and Nb2O5 phases, respectively. SEM showed the formation of nonprotective oxide layer on the bare Nb alloy and a protective (adherent, nonporous) oxide layer on silicide-coated samples. The formation of protective SiO2 layer on the silicide-coated samples greatly improved the oxidation resistance at higher temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. M. Levy, J.J. Falco, and R.B. Herring: J. Less-Common Met., 1974, vol. 34, pp. 321–43.10.1016/0022-5088(74)90176-3 ↗
2. T. Hurlen: J. Inst. Met., 1960-61, vol. 89, p. 273.
3. I. McKee and G.R. Wallwork: J. Less-Common Met., 1973, vol. 30, pp. 249–58.10.1016/0022-5088(73)90111-2 ↗
4. P. Kofstad: High Temperature Oxidation of Metals, Wiley, New York, NY, 1966.10.1149/1.2426698 ↗
5. P. Kofstad: High Temperature Corrosion, Elsevier Science, New York, NY, 1988.
6. N. Norman, P. Kofstad, and O. Krudtaa: J. Less-Common Met., 1962, vol. 4, no. 2, pp. 124–37.10.1016/0022-5088(62)90011-5 ↗
7. A.S. Khanna: Introduction to High Temperature Oxidation and Corrosion, ASM International, Material Park, OH, 2002.
8. G. Brauer, H. Muller, and G. Kuhner: J. Less-Common Met., 1962, vol. 4, no. 6, pp. 533–46.10.1016/0022-5088(62)90042-5 ↗
9. M. Arbuzov and V. Chuprina: Soviet Phys. J., 1965, vol. 8, pp. 87–89.10.1007/BF00838593 ↗
10. E.J. Delgrosso, R.C. Krutenat, C.E. Carlson, and J.S. Carta: J. Less-Common Met., 1963, vol. 5, pp. 57–77.10.1016/0022-5088(63)90044-4 ↗
11. W.D. Klopp, C.T. Sims, and R.I. Jaffee: Proc. 2nd Int. Conf. Peaceful Uses of Atomic Energy, 1958, vol. 6, p. 293.
12. M.S. El-Genk and J.-M. Tournier: J. Nucl. Mater., 2005, vol. 340, pp. 93–112.10.1016/j.jnucmat.2004.10.118 ↗
13. E.N. Sheftel and O.A. Bannykh: Int. J. Refract. Met. Hard Mater., 1993-1994, vol. 12, pp. 303–14.10.1016/0263-4368(93)90038-H ↗
14. R. Smith: J. Less-Common Met., 1960, vol. 2, pp. 191–206.10.1016/0022-5088(60)90014-X ↗
15. M. Levy and J.J. Falco: J. Less-Common Met., 1972, vol. 27, pp. 143–62.10.1016/0022-5088(72)90026-4 ↗
16. R.O. Suzuki, M. Ishikawa, and K. Ono: J. Alloys Compd., 2002, vol. 336, pp. 280–85.10.1016/S0925-8388(01)01879-5 ↗
17. H.J. Grabke and G.H. Meter: Oxid. Met., 1995, vol. 44, pp. 147–76.10.1007/BF01046726 ↗
18. E. Strom, Y. Cao, and Y.M. Yao: Trans. Nonferrous Met. Soc. China, 2007, vol. 17, pp. 1282–86.10.1016/S1003-6326(07)60263-5 ↗
19. S. Majumdar, A. Arya, I.G. Sharma, A.K. Sharma, and S. Banerjee: Appl. Surf. Sci., 2010, vol. 257, pp. 635–40.10.1016/j.apsusc.2010.07.055 ↗
20. B.V. Cockeram: Surf. Coat. Technol., 1995, vols. 76–77, pp. 20–27.10.1016/0257-8972(95)02492-1 ↗
21. C. Milanese, V. Buscagila, F. Maglia, and U.A. Tamburini: Acta Mater., 2003, vol. 51, pp. 4837–46.10.1016/S1359-6454(03)00323-9 ↗
22. M.Z. Alam, A.S. Rao, and D.K. Das: Oxid. Met., 2010, vol. 73, pp. 513–30.10.1007/s11085-010-9190-x ↗
23. M. Li, L. Song, J. Le, X. Zhang, B. Pei, and X. Hu: Key Eng. Mater., 2005, vols. 280–283, pp. 907–10.10.4028/www.scientific.net/KEM.280-283.907 ↗
24. J. Hampikian, M. Saqib, and D. Potter: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 491–500.10.1007/BF02914914 ↗
25. S. Majumdar, P. Sengupta, G.B. Kale, and I.G. Sharma: Surf. Coat. Technol., 2006, vol. 200, pp. 3713–18.10.1016/j.surfcoat.2005.01.034 ↗
26. D.L. Douglass: J. Less-Common Met., 1963, vol. 5, pp. 151–57.10.1016/0022-5088(63)90008-0 ↗
27. K. Wang and R.R. Reeber: Mater. Sci. Eng. R, 1998, vol. 23, pp. 101–37.10.1016/S0927-796X(98)00011-4 ↗
28. D.W. Aylmore, S.J. Gregg, and W.B. Jepson: J. Electrochem. Soc., 1960, vol. 107, pp. 495–501.10.1149/1.2427731 ↗
29. M. del Pilar Moricca and S. Varma: J. Alloys Compd., 2010, vol. 489, no. 1, pp. 195–201.10.1016/j.jallcom.2009.09.051 ↗
30. J. Stringer: Acta Metall., 1969, vol. 17, pp. 1227–46.10.1016/0001-6160(69)90139-4 ↗
31. Y.S. Touloukian: Thermal Expansion Metals and Alloys, Thermophysical Properties of Matter, Plenum Press, New York, NY, vol. 12, 1970.
32. Y.S. Touloukian: Thermal Expansion Nonmetals, Thermophysical Properties of Matter, Plenum Press, New York, NY, vol. 13, 1970.