journal article·2008-07

Effects of Deformation-Induced Constraint on High-Cycle Fatigue in Ti Alloys with a Duplex Microstructure

K.S. Chan, Y.-D. Lee

Publisher page

Abstract

The effects of the deformation behaviors of individual phases in Ti alloys with a duplex microstructure containing a mixture of primary α grains and lamellar α + β colonies have been analyzed by applying the finite-element method (FEM) to the relevant microstructure. The softer primary α grains and the harder lamellar α + β colonies are treated as distinct microstructural units with different constitutive properties. The FEM results indicate that the softer (primary α) phase, which reaches yielding first, tends to concentrate both the plastic strain and the hydrostatic stress, whose magnitudes depend on the volume fraction of the primary α grains and the load levels. The insight from the FEM analyses has been used to modify the linear relation between alternating stress and mean stress in a Haigh or modified Goodman diagram by incorporating a microstructure-induced hydrostatic stress term, leading to a set of bilinear relations for high-cycle fatigue (HCF) failures of Ti alloys with a duplex microstructure. The applicability of the micromechanical approach to treating the mean stress effects in HCF failure of Ti-6Al-4V with various duplex microstructures is elucidated by comparison against experimental data in the literature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. B.A. Cowles: Int. J. Fract., 1996, vol. 80, pp. 147–6310.1007/BF00012667 ↗
2. T. Nicholas, J.R. Zuiker: Int. J. Fract., 1996, vol. 80, pp. 219–3510.1007/BF00012670 ↗
3. R.S. Bellows, S. Muju, T. Nicholas: Int. J. Fatigue, 1999, vol. 21, pp. 687–9710.1016/S0142-1123(99)00032-8 ↗
4. R. Bellows: UDRI Final Report to AFOSR No. F33615-96-C-5269, University of Dayton Research, Dayton, OH, 2001, ch. 3, app. 3C
5. R. Bellows: UDRI Final Report to AFOSR No. F33615-96-C-5269, University of Dayton Research, Dayton, OH, 2001, ch. 3, app. 3F
6. S.G. Ivanova, F.S. Cohen, R.R. Biederman, R.D. Sisson Jr.: in Fatigue Behavior of Titanium Alloys, R.R. Boyce, D. Eylon, G. Lutjering, eds., TMS, Warrendale, PA, 1999, pp. 39–46
7. S.G. Ivanova, R.R. Biederman, R.D. Sisson Jr.: J. Mater. Eng. Perform., 2002, vol. 11(2), pp. 226–3110.1361/105994902770344312 ↗
8. B.P. Haigh: Proc. Inst. Auto. Eng., 1930, vol. 24, pp. 320–47
9. J. Goodman: Mechanics Applied to Engineering, 9th ed., Longmans, Green & Co., Inc., New York, NY, 1930, pp. 631–36
10. G.E. Dieter Jr.: Mechanical Metallurgy, McGraw-Hill, New York, NY, 1961, pp. 323–26
11. C.R. Soderberg: Trans. ASME, 1930, vol. 42, APM-52-2, pp. 13–2810.1115/1.4057307 ↗
12. J.J. Lucas: in Titanium, Science, and Technology, R.I. Jaffee, H.M. Burte, eds., Plenum Press, New York, NY, 1973, vol. 3, pp. 2081–95
13. R.K. Steele, A.J. McEvily: in Taitanium and Titanium Alloys, J.C. Williams, A.F. Belov, eds., Plenum Press, New York, NY, 1982, vol.1, pp. 589–600
14. J. Lindemann, L. Wagner: Mater. Sci. Eng., 1997, vol. A234–236, pp. 1118–2110.1016/S0921-5093(97)00347-X ↗
15. J. Lindemann, L. Wagner: in Fatigue Behavior of Titanium Alloys, R.R. Boyer, D. Eylon, G. Lutjering, eds., TMS, Warrendale, PA, 1999, pp. 39–46
16. S. Adachi, L. Wagner, G. Lutjering: in Titanium Science and Technology, G. Lutjering, U. Zwicker, W. Bunk, eds., DGM, Oberursel, 1985, pp. 2139–46
17. A. Atrens, W. Hoffelner, T.W. Duerig, J.E. Allison: Scripta Metall., 1983, vol. 17, pp. 601–0610.1016/0036-9748(83)90385-X ↗
18. J. Jinoch, S. Ankem, H. Margolin: Mater. Sci. Eng., 1978, vol. 34, pp. 203–1110.1016/0025-5416(78)90052-6 ↗
19. S. Ankem, H. Margolin: Metall. Trans. A, 1982, vol. 13A, pp. 595–60210.1007/BF02644424 ↗
20. S. Ankem, H. Margolin: Metall. Trans. A, 1982, vol. 13A, pp. 603–0910.1007/BF02644425 ↗
21. S. Ankem, H. Margolin: Metall. Trans. A, 1986, vol. 17A, pp. 2209–2610.1007/BF02645919 ↗
22. K.S. Chan, C.C. Wojcik, D.A. Koss: Metall. Trans. A, 1981, vol. 12A, pp. 1899–190710.1007/BF02643801 ↗
23. K.S. Chan: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3409–2210.1007/s11661-004-0177-6 ↗
24. S. Ankem, H. Margolin: Metall. Trans. A, 1980, vol. 11A, pp. 963–7210.1007/BF02654710 ↗
25. C.A. Greene, S. Ankem: Met. Sci. Eng., 1995, vol. A202, pp. 103–1110.1016/0921-5093(95)09786-4 ↗
26. ABAQUS: Analysis User’s Manual, Version 6.3, Hibbitt, Karlsson & Sorensen, Inc., Pawtucket, RI, 2002
27. R. Hill: The Mathematical Theory of Plasticity, Chapter XII, Oxford University Press, London, 1967, pp. 320–34
28. K.S. Chan: Metall. Trans. A, 1985, vol. 16A, pp. 629–3910.1007/BF02814237 ↗