Cooling Rate Dependence of Boron Distribution in Low Carbon Steel
Source abstract
Abstract
The behavior of boron (B) segregation to austenite grain boundaries in low carbon steel was studied using particle tracking autoradiography (PTA) and secondary ion mass spectroscopy (SIMS). An effective time method was used to compare the cooling rate (CR) dependence of this segregation during continuous cooling and its time dependence during isothermal holding. Comparison of these segregation behaviors has confirmed that the CR dependence of B segregation agrees well with its time dependence and is mainly a result of the phenomenon of nonequilibrium segregation. Based on the CR dependence of B segregation, the continuous cooling transformation behavior of B-bearing steel as compared with B-free steel was also investigated using dilatometry and microstructural observations. The addition of a small amount of B to low carbon steel retarded significantly the austenite-to-ferrite transformation and finally expanded the range of cooling programs that result in the formation of bainitic microstructures. Analysis of the B distribution has confirmed that this retardation effect of B on ferrite transformation is attributed to the CR dependence of B segregation to austenite grain boundaries during cooling after austenitization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. M. Ueno and T. Inoue: Trans. Iron Steel Inst. Jpn., 1973, vol. 13, pp. 210–17.10.2355/isijinternational1966.13.210 ↗
2. G.F. Melloy, P.R. Slimon, and P.P. Podgursky: Metall. Trans., 1973, vol. 4, pp. 2279–89.10.1007/BF02669367 ↗
3. C.R. Simcoe, A.R. Elaea, and G.K. Manning: Trans. AIME, 1956, vol. 206, pp. 984–88.
4. P. Maitrepierre, J. Rofes-Vernis, and D. Thivellier: Boron in Steel, S.K. Banerji and J.E. Morral, eds., AIME, Warrendale, PA, 1979, pp. 1–18.
5. B.M. Kapadia, R.M. Brown, and W.J. Murphy: Trans. TMS-AIME, 1968, vol. 242, pp. 1689–94.
6. R.M. Goldhoff and J.W. Spretnak: Trans. AIME, 1957, vol. 209, pp. 1278–83.
7. T.D. Xu, S. Song, Z. Yuan, and Z. Yu: J. Mater. Sci., 1990, vol. 25, pp. 1739–44.10.1007/BF00582469 ↗
8. T.M. Williams, A.M. Stoneham, and D.R. Harries: Met. Sci., 1976, vol. 10, pp. 14–19.10.1016/0036-9748(76)90200-3 ↗
9. L. Karlsson, H. Norden, and H. Odelius: Acta Metall., 1988, vol. 36, pp. 1–12.10.1016/0001-6160(88)90023-5 ↗
10. X. Huang, M.C. Chaurvedi, N.L. Richards, and J. Jackman: Acta Mater., 1997, vol. 45, pp. 3095–170.10.1016/S1359-6454(97)00017-7 ↗
11. R.G. Faulker: J. Mater. Sci., 1981, vol. 16, pp. 373–83.10.1007/BF00738626 ↗
12. S. Song, T.D. Xu, and Z. Yuan: Acta Metall., 1989, vol. 37, pp. 319–23.10.1016/0001-6160(89)90290-3 ↗
13. X.L. He, Y.Y. Chu, and J.J. Jonas: Acta Metall., 1989, vol. 37, pp. 2905–16.10.1016/0001-6160(89)90325-8 ↗
14. T.D. Xu and S. Song: Acta Metall., 1989, vol. 37, pp. 2499–506.10.1016/0001-6160(89)90048-5 ↗
15. H. Asahi: ISIJ Int., 2002, vol. 42, pp. 1150–55.10.2355/isijinternational.42.1150 ↗
16. T. Hara, H. Asahi, R. Uemori, and H. Tamehiro: ISIJ Int., 2004, vol. 44, pp. 1431–40.10.2355/isijinternational.44.1431 ↗
17. K.A. Taylor: Metall. Trans. A, 1992, vol. 23A, pp. 107–19.10.1007/BF02660858 ↗
18. S. Watanabe, H. Otani, and T. Kunitake: Trans. ISIJ, 1983, vol. 23, pp. 120–27.10.2355/isijinternational1966.23.120 ↗
19. B.C. Hwang, D.W. Suh, and S.J. Kim: Scripta Mater., 2011, vol. 64, pp. 1118–20.10.1016/j.scriptamat.2011.03.003 ↗
20. X.L. He and Y.Y. Chu: J. Phys. D, 1983, vol. 16, pp. 1145–58.10.1088/0022-3727/16/6/023 ↗
21. T.B. Cameron and J.E. Morral: Boron in Steel: Proc. Int. Symp. Boron Steels, S.K. Banerjii and J.E. Morral, eds., Metall. Soc. AIME, New York, NY, 1980, pp. 61–79.
22. Y.K. Lee: J. Mater. Sci. Lett., 2002, vol. 21, pp. 1253–55.10.1023/A:1016555119230 ↗
23. C. Capdevila, F.G. Caballero, and C.G. de Andrés: ISIJ Int., 2002, vol. 42, pp. 894–902.10.2355/isijinternational.42.894 ↗
24. C.R. Simcoe, A.R. Elaea, and G.K. Manning: Trans. AIME, 1955, vol. 206, pp. 193–200.
25. P. Maitrepierre, D. Thivellier, and R. Tricot: Metall. Trans. A, 1975, vol. 6A, pp. 287–301.10.1007/BF02667283 ↗