journal article·2007-11

Dynamic Recrystallization: The Dynamic Deformation Regime

L.E. Murr, C. Pizaña

Publisher page

Abstract

Severe plastic deformation (PD), especially involving high strain rates (>103 s–1), occurs through solid-state flow, which is accommodated by dynamic recrystallization (DRX), either in a continuous or discontinuous mode. This flow can be localized in shear instability zones (or adiabatic shear bands (ASBs)) with dimensions smaller than 5 μ, or can include large volumes with flow zone dimensions exceeding centimeters. This article illustrates these microstructural features using optical and electron metallography to examine a host of dynamic deformation examples: shaped charge jet formation, high-velocity and hypervelocity impact crater formation, rod penetration into thick targets (which includes rod and target DRX flow and mixing), large projectile-induced target plug formation and failure, explosive welding, and friction-stir welding and processing. The DRX is shown to be a universal mechanism that accommodates solid-state flow in extreme (or severe) PD regimes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. H.A. Grebe, H.R. Pak, M.A. Meyers: Metall. Trans. A, 1985, vol. 16A, pp. 711-21.
2. M.A. Meyers, H.R. Pak: Acta Mater., 1986, vol. 34, pp. 2493–99.10.1016/0001-6160(86)90152-5 ↗
3. A.H. Chokshi, M.A. Meyers: Scripta Metall. Mater., 1990, vol. 24, pp. 605–08.10.1016/0956-716X(90)90209-Y ↗
4. U. Andrade, M.A. Meyers, K.S. Vecchio, A.H. Chokshi: Acta Metall. Mater., 1994, vol. 42 (9), pp. 3183–95.10.1016/0956-7151(94)90417-0 ↗
5. M.A. Meyers, Y.J. Chen, F.D.S. Marquis, D.S. Kim: Metall. Mater. Trans. A, 1995, vol. 26, pp. 2493–2502.10.1007/BF02669407 ↗
6. L.E. Murr, H.K. Shih, C.-S. Niou, L. Zernow: Scripta Metall. Mater., 1993, vol. 29, pp. 567–71.10.1016/0956-716X(93)90167-Q ↗
7. L.E. Murr, H.K. Shih, C.-S. Niou, L. Zernow: Scripta Metall. Mater., 1993, vol. 29, pp. 1291–97.10.1016/0956-716X(93)90167-Q ↗
8. L.E. Murr, C.-S. Niou, E.P. Garcia, E. Ferreyra, T., J.M. Rivas, and J.C. Sanchez: Mater. Sci. Eng. A, 1997, vol. 222, pp. 118–3210.1016/S0921-5093(96)10518-9 ↗
9. C. Kennedy, L.E. Murr: Mater. Sci. Eng. A, 2002, vol. 325, pp. 131–43.10.1016/S0921-5093(01)01449-6 ↗
10. E.A. Trillo, E.V. Esquivel, L.E. Murr, L.S. Magness: Mater. Character., 2002, vol. 48, pp. 407–21.10.1016/S1044-5803(02)00322-4 ↗
11. C. Pizaña, L.E. Murr, M.T. Baquera, I.A. Anchondo, A. Putrevu, C.Y. Piña, T.C. Tamoria, H.C. Chen, S.J. Cytron: Mater. Sci. Eng. A, 2006, vol. 428, pp. 301–13.10.1016/j.msea.2006.05.026 ↗
12. G. Liu, L.E. Murr, C-S. Niou, J.C. McClure, F.R. Vega: Scripta Mater., 1997, vol. 37 (3), pp. 355–61.10.1016/S1359-6462(97)00093-6 ↗
13. G. Liu, L.E. Murr, J.C. McClure: J. Mater. Sci. Lett., 1997, vol. 16, pp. 1801–03.10.1023/A:1018556332357 ↗
14. L.E. Murr, R.D. Flores, O.V. Flores, J.C. McClure, G. Liu, D. Brown: Mater. Res. Innov., 1998, vol. 1, pp. 211–23.10.1007/s100190050043 ↗
15. Y. Li, L.E. Murr, J.C. McClure: Mater. Sci. Eng. A, vol. 271, pp. 213–23.10.1016/S0921-5093(99)00204-X ↗
16. L.E. Murr, E.A. Trillo, S. Pappu, C. Kennedy: J. Mater. Sci., 2002, vol. 37, pp. 3337–60.10.1023/A:1016541023502 ↗
17. A. Karimi, M. Maamouri, J.L. Martin: Mater. Sci. Eng. A, 1989, vol. 113, pp. 287–9610.1016/0921-5093(89)90317-1 ↗
18. High Performance Structures and Materials II, C.A. Brebbia and W.P. DeWilde, eds., WIT Press, London, 2004
19. Ultrafine Grained Materials, R.S. Mishra, S.L. Semiatin, C. Suryanarayana, N.N. Thadhani, and T.C. Lowe, eds., TMS, Warrendale, PA, 2000
20. M.A. Meyers, A. Mishra, D.J. Benson: Progr. Mater. Sci., 2006, vol. 51, pp. 427–556.10.1016/j.pmatsci.2005.08.003 ↗
21. S.A. Quiñones, L.E. Murr: Phys. Status Solidi A, 1998, vol. 166, pp. 763–8910.1002/(SICI)1521-396X(199804)166:2<763::AID-PSSA763>3.0.CO;2-9 ↗
22. E.A. Trillo, L.E. Murr, A.H. Bujanda, N.E. Martinez: Acta Metall., 2002, vol. 50 (1), pp. 121–31
23. L.E. Murr, A.A. Bujanda, E.A. Trillo, N.E. Martinez: J. Mater. Sci. Lett., 2002, vol. 21, pp. 559–6310.1023/A:1015465122917 ↗
24. B. Gonzales, L.E. Murr, O.L. Valerio, E.V. Esquivel, H. Lopez: Mater. Character., 2003, vol. 49 (4), pp. 359–66.10.1016/S1044-5803(03)00034-2 ↗
25. E.V. Esquivel, L.E. Murr, E.A. Trillo, M. Baquera: J. Mater. Sci., 2003, vol. 38, pp. 2223–31.10.1023/A:1023796619086 ↗
26. O.L. Valerio-Flores, L.E. Murr, V.S. Hernandez, S.A. Quinones: J. Mater. Sci., 2004, vol. 39, pp. 6271–80.10.1023/B:JMSC.0000043597.72588.d1 ↗
27. E. Ferreyra, T., L.E. Murr, E.P. Garcia, and F. Hörz: J. Mater. Sci., 1997, vol. 32, pp. 2573–8510.1023/A:1018646916872 ↗
28. L.E. Murr, C.-S. Niou, E. Ferreyra, T., E.P. Garcia G. Liu F. Hörz, and R.P. Bernhard: J. Mater. Sci., vol. 32, pp. 3143–5610.1023/A:1018694532744 ↗
29. F. Martinez, L.E. Murr, A. Ramirez, M.I. Lopez, S.M. Gaytan, B.F. Schuster: Mater. Sci. Eng., 2007, vol. A454–455, pp. 581–8910.1016/j.msea.2006.11.097 ↗
30. S. Pappu, L.E. Murr, S. Sen, D. Kapoor, L.S. Magness: Mater. Sci. Eng. A, 2001, vol. 298, pp. 144–57.10.1016/S0921-5093(00)01280-6 ↗
31. E.A. Trillo, E.V. Esquivel, L.E. Murr, L.S. Magness: Mater. Character., 2002, vol. 48, pp. 407–21.10.1016/S1044-5803(02)00322-4 ↗
32. R.S. Rinehart, J. Pearson: Explosive Working of Metals, Pergamon, New York, NY, 1963, pp.
33. S.H. Carpenter: Shock Waves and High-Strain-Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981, pp. 941–59.10.1007/978-1-4613-3219-0_53 ↗
34. L. E. Murr: Mater. Manuf. Processes, 1991, vol. 6 (1), pp. 1–32.10.1080/10426919108934733 ↗
35. E.V. Esquivel, L.E. Murr: Mater. Sci. Technol., 2006, vol. 22 (4), pp. 438–52.10.1179/174328406X91186 ↗
36. S. Pappu, C. Kennedy, L.E. Murr, L.S. Magness, D. Kapoor: Mater. Sci. Eng. A, 1999, vol. 262, pp. 115–28.10.1016/S0921-5093(98)00997-6 ↗
37. S. Pappu, L.E. Murr: Mater. Sci. Eng. A, 2000, vol. 284, pp. 148–5710.1016/S0921-5093(00)00792-9 ↗
38. N.V. Naumovich, A.I. Yadevich, N.M. Chigrinova: in Shock Waves for Industrial Applications, L.E. Murr, ed., Noyes Publications, Park Ridge, NJ, 1988, p. 170.
39. D.G. Brasher, D.J. Butler, A.W. Hane: in Shock Waves for Industrial Applications, L.E. Murr, ed., Noyes Publications, Park Ridge, NJ, 1988, p. 216.
40. C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling, C.C. Bampton: Scripta Mater., 1997, vol. 36, pp. 69–73.10.1016/S1359-6462(96)00344-2 ↗
41. G. Liu, L.E. Murr, C-S. Niou, J.C. McClure, F.R. Vega: Scripta Mater., 1997, vol. 37, pp. 355–5910.1016/S1359-6462(97)00093-6 ↗
42. W. Tang, X. Guo, J.C. McClure, L.E. Murr, A. Nunes: J. Mater. Process. Manuf. Sci., 1998, vol. 7, pp. 163–7510.1106/55TF-PF2G-JBH2-1Q2B ↗
43. L.E. Murr, G. Liu, J.C. McClure: J. Mater. Sci., 1997, vol. 16, pp. 1801–13
44. L.E. Murr, G. Sharma, F. Contreras, M. Guerra, S.H. Kazi, M. Siddique, F.D. Flores, D.J. Shindo, K.F. Soto, E.A. Trillo, C. Schmidt, J.C. McClure: Aluminum 2001–Proc. TMS 2001: Aluminum Automotive and Joining Sessions, S.K. Das, J.G. Kaufman, T.J. Lienert eds., TMS, Warrendale, PA, 2001, p. 197.
45. R.A. Prado, L.E. Murr, K.F. Soto, J.C. McClure: Mater. Sci. Eng. A, 2003, vol. 349, pp. 156–6410.1016/S0921-5093(02)00750-5 ↗
46. P.S. Follansbee: in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer M.A. Meyers eds., Marcel Dekker, New York, NY, 1986, p. 451.
47. E.V. Esquivel, L.E. Murr: Mater. Sci. Eng. A, 2005, vol. 409, pp. 13–23.10.1016/j.msea.2005.04.063 ↗
48. J.C.M. Li: in Science and Technology of Interfaces, S. Ankem, C.S. Pande, I. Ovid’ko S. Ranganathan eds., TMS, Warrendale, PA, 2002, p. 255.
49. J.C.M. Li: in Frontiers in Materials Science, L.E. Murr and C. Stein, eds., Marcel Dekker, Inc., New York, NY, 1976, p. 527