journal article·2015-12

Influence of Heat Treatment on the Microstructure and Corrosion Resistance of 13 Wt Pct Cr-Type Martensitic Stainless Steel

Si-Yuan Lu, Ke-Fu Yao, Yun-Bo Chen, Miao-Hui Wang, Xue-Yuan Ge

Publisher page

Abstract

The effect of heat treatment on the microstructure and the electrochemical properties of a typical corrosion-resistant plastic mold steel in Cl−-containing solution were studied in this research. Through X-ray diffraction patterns, SEM and TEM analysis, it was found that the sequence of the precipitates in the steels tempered at 573 K, 773 K, and 923 K (300 °C, 500 °C, and 650 °C) was θ-M3C carbides, nano-sized Cr-rich M23C6 carbides, and micro/submicron-sized Cr-rich M23C6 carbides, respectively. The results of the electrochemical experiments showed that the pitting potential of the as-quenched martensitic stainless steels increased with the austenitizing temperature. However, the corrosion resistance of the steels would decreased after tempering, especially when tempered at 773 K (500 °C), no passivation regime could be found in the polarization curve of the MSSs and no effective passive film could be formed on the steels in Cl−-containing environments. The present results suggested that the temperature around 773 K (500 °C) should be avoided for tempering process of MSS used as plastic molds.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Schneider R, Mesquita R (2011) Int. Heat Treatment Surf. Eng. 5(3):94–10010.1179/174951411X12956207253500 ↗
2. C. Ernst and W. Pannes: Proceedings of the 6th Int. Tooling Conf., Karlstad, Sweden, 2002, pp. 321–37.
3. F. Hippenstiel, V. Lubich, P. Vetter and W. Grimm: Handbook of Plastics Mould Steels, Edelstahlwerke Buderus AG, Germany, 2004, pp. 2–5.
4. A. Jimenez, V. Berenguer, J. Lopez and A. Sanchez: J. Appl. Polym. Sci., 1993, vol. 50 (9), pp. 1565–73.10.1002/app.1993.070500910 ↗
5. D.C. Wen: J. Mater. Sci, 2009, vol. 44 (23), pp. 6363–71.10.1007/s10853-009-3877-x ↗
6. S. Zinner, H. Lenger and I. Siller: BHM Berg-und Hüttenmännische Monatshefte, 2010, vol. 155 (7), pp. 313–17.10.1007/s00501-010-0579-2 ↗
7. H. Hill, S. Weber, S. Siebert, S. Huth and W. Theisen: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 686–95.10.1007/s11661-009-0148-z ↗
8. H. Hill, S. Huth, S. Weber and W. Theisen: Mater. Corros., 2011, vol. 62 (5), pp. 436–43.10.1002/maco.200905570 ↗
9. R. Schneider, J. Perko and G. Reithofer: Mater. Manuf. Processes, 2009, vol. 24 (7–8), pp. 903–08.10.1080/10426910902941553 ↗
10. G. Frankel: J. Electrochem. Soc., 1998, vol. 145 (6), pp. 2186–98.10.1149/1.1838615 ↗
11. S. Marcelin, N. Pébère and S. Régnier: Electrochim. Acta, 2013, vol. 87, pp. 32–40.10.1016/j.electacta.2012.09.011 ↗
12. K. Sammt, J. Sammer, J. Geckle and W. Liebfahrt: 6th Int. Tooling Conf. on “The Use Of Tool Steels: Experience and Research”. Karlstad, Sweden, 2002, pp. 285–92.
13. A.N. Isfahany, H. Saghafian and G. Borhani: J. Alloys. Compd., 2011, vol. 509 (9), pp. 3931–36.10.1016/j.jallcom.2010.12.174 ↗
14. Lo KH, Shek CH, Lai JKL (2009) Mater. Sci. Eng. R 65(4):39–104.10.1016/j.mser.2009.03.001 ↗
15. Y.-S. Choi, J.-G. Kim, Y.-S. Park and J.-Y. Park: Mater. Lett., 2007, vol. 61 (1), pp. 244–47.10.1016/j.matlet.2006.04.041 ↗
16. N.N. Rammo and O.G. Abdulah: J. Alloys. Compd., 2006, vol. 420 (1), pp. 117–20.10.1016/j.jallcom.2005.10.075 ↗
17. E. Erdos: Analysis of High Temperature Materials, vol. 204, Applied Science Publishers, London, 1983, PP. 45–56.
18. S.-Y. Lu, K.-F. Yao, Y.-B. Chen, M.-H. Wang and X. Liu: Electrochim. Acta, 2015, vol. 165, pp. 45–55.10.1016/j.electacta.2015.02.038 ↗
19. H. Li, S. Xia, B. Zhou and J. Peng: Mater. Charact., 2013, vol. 81, pp. 1–6.10.1016/j.matchar.2013.04.005 ↗
20. B. Tang, L. Jiang, R. Hu and Q. Li: Mater. Charact., 2013, vol. 78, pp. 144–50.10.1016/j.matchar.2013.02.006 ↗
21. S. Zangeneh, M. Ketabchi and H.F. Lopez: Mater. Lett., 2014, vol. 116, pp. 188–90.10.1016/j.matlet.2013.11.018 ↗
22. H. Hong, B. Rho and S. Nam: Mater. Sci. Eng. A, 2001, vol. 318 (1), pp. 285–92.10.1016/S0921-5093(01)01254-0 ↗
23. N. Zhu, Y. He, W. Liu, L. Li, S. Huang, J. Vleugels and O. Van der Biest: J. Mater. Sci. Technol., 2011, vol. 27 (8), pp. 725–28.10.1016/S1005-0302(11)60133-3 ↗
24. G. Lorang, M.D.C. Belo, A.M.P. Simoes and M.G.S. Ferreira: J. Electrochem. Soc., 1994, vol. 141 (12), pp. 3347–56.10.1149/1.2059338 ↗
25. D.E. Williams, R.C. Newman, Q. Song and R.G. Kelly: Nature, 1991, vol. 350, pp. 216–19.10.1038/350216a0 ↗
26. Y. Lee, D. Lee, J. Jang and W.-S. Ryu: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3331–33.10.1007/s11661-006-0236-2 ↗
27. S. El-Egamy and W. Badaway: J. Appl. Electrochem., 2004, vol. 34 (11), pp. 1153–58.10.1007/s10800-004-1709-x ↗
28. H. Luo, C.F. Dong, X.G. Li and K. Xiao: Electrochim. Acta, 2012, vol. 64, pp. 211–20.10.1016/j.electacta.2012.01.025 ↗
29. B. Hirschorn, M.E. Orazem, B. Tribollet, V. Vivier, I. Frateur and M. Musiani: Electrochim. Acta, 2010, vol. 55 (21), pp. 6218–27.10.1016/j.electacta.2009.10.065 ↗
30. S.-Y. Lu, K.-F. Yao, Y.-B. Chen, M.-H. Wang, Y. Shao and X.-Y. Ge: J. Appl. Electrochem., 2015, vol. 45(4), pp. 375–83.10.1007/s10800-015-0796-1 ↗
31. H. Berns and W. Theisen: Ferrous Materials:Steel and Cast Iron, 1st ed., Springer, Berlin, 2008, pp. 317–27.
32. Lo KH, Shek CH, Lai JKL (2009) Mater. Sci. Eng. R 65(4–6):39–10410.1016/j.mser.2009.03.001 ↗
33. C. Liu, K.-F. Yao, Z. Lu and G. Gao: J. Comput. Aided Mater. Des., 2000, vol. 7, pp. 63–69.10.1023/A:1008779710225 ↗
34. K.-F. Yao, B. Qian, W. Shi, C. Liu and Z. Liu: Acta Metallurgica Sinica, 2003, vol. 39, pp. 892–96.
35. H. Nakamichi, K. Sato, Y. Miyata, M. Kimura and K. Masamura: Corros. Sci, 2008, vol. 50 (2), pp. 309–15.10.1016/j.corsci.2007.08.004 ↗
36. K. Kaneko, T. Fukunaga, K. Yamada, N. Nakada, M. Kikuchi, Z. Saghi, J.S. Barnard and P.A. Midgley: Scripta Mater., 2011, vol. 65 (6), pp. 509–12.10.1016/j.scriptamat.2011.06.010 ↗