journal article·2017-07Open access

Tempering of Low-Temperature Bainite

Mathew J. Peet, Sudarsanam Suresh Babu, Mike K. Miller, H. K. D. H. Bhadeshia

Abstract

Abstract Electron microscopy, X-ray diffraction, and atom probe tomography have been used to identify the changes which occur during the tempering of a carbide-free bainitic steel transformed at 473 K (200 °C). Partitioning of solute between ferrite and thin-films of retained austenite was observed on tempering at 673 K (400 °C) for 30 minutes. After tempering at 673 K (400 °C) and 773 K (500 °C) for 30 minutes, cementite was observed in the form of nanometre scale precipitates. Proximity histograms showed that the partitioning of solutes other than silicon from the cementite was slight at 673 K (400 °C) and more obvious at 773 K (500 °C). In both cases, the nanometre scale carbides are greatly depleted in silicon.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. F.G. Caballero, H.K.D.H. Bhadeshia, K. J. A. Mawella, D. G. Jones, P. Brown: Mater. Sci. Technol. 2002, vol. 18, pp. 279–284.10.1179/026708301225000725 ↗
2. F. G. Caballero, H. K. D. H. Bhadeshia: Curr. Opin. Solid State Mater. Sci. 2004, vol. 8, pp. 251–257.10.1016/j.cossms.2004.09.005 ↗
3. H. K. D. H. Bhadeshia: Mater. Sci. Technol. 2005, vol. 21, pp. 1293–1302.10.1179/174328405X63999 ↗
4. H. K. D. H. Bhadeshia: Sci. Technol. Adv. Mater. 2013, vol. 14, p. 014202.10.1088/1468-6996/14/1/014202 ↗
5. H. J. Stone, M. J. Peet, H. K. D. H. Bhadeshia, P. J. Withers, S. S. Babu, E. D. Specht: Proc. R. Soc. A 2008, vol. 464, pp. 1009–1027.10.1098/rspa.2007.0201 ↗
6. M. J. Peet, H. K. D. H. Bhadeshia: Metall. Mater. Trans. A 2011, vol. 42A, pp. 3344–3348.10.1007/s11661-011-0755-3 ↗
7. C. Garcia-Mateo, F. G. Caballero: ISIJ 2005, vol. 45 (11), pp. 1736–1740.10.2355/isijinternational.45.1736 ↗
8. H. S. Hasan, M. J. Peet, M.-N. Avettand-Fénoël, H. K. D.H. Bhadeshia: Mater. Sci. Eng. A 2014, 589, pp. 340–347.10.1016/j.msea.2014.07.097 ↗
9. I. B. Timokhina, H. Beladi, X. Y. Xiong, Y. A. Adachi, P. D. Hodgson: Acta Mater. 2011, 59, pp. 5511–5522.10.1016/j.actamat.2011.05.024 ↗
10. H. S. Hasan, M. J. Peet, H. K. D. H. Bhadeshia: Int. J. Mater. Res. 2012, vol. 103(11), pp. 1319–1324.10.3139/146.110788 ↗
11. D. Luo, M. Peet, S. W. Ooi, P. Yan, Z. Yin, H. Bhadeshia: Mater. Sci. Technol. 2014, vol. 30, pp. 1282–1286.10.1179/1743284714Y.0000000545 ↗
12. C. Garcia-Mateo, M. J. Peet, F. G. Caballero, H. K. D.H. Bhadeshia: Mater. Sci. Technol. 2004, vol. 20, pp. 814–818.10.1179/026708304225017355 ↗
13. M. J. Peet: Ph.D. thesis, University of Cambridge, 2010.
14. C. N. Hulme-Smith, I. Lonardelli, M. J. Peet, A. C. Dippel, H. K. D. H. Bhadeshia: Scr. Mater. 2013, vol. 68, p. 195.10.1016/j.scriptamat.2012.10.017 ↗
15. D. P. Antia, S. G. Fletcher, M. Cohen: Trans. Am. Soc. Met. 1944, vol. 32, pp. 290–332.
16. K. H. Jack: J. Iron Steel Inst. 1951, 169, pp. 26–36.
17. G. R. Speich, W. C. Leslie: Metall. Trans. 1972, vol. 3, pp. 1043–1054.10.1007/BF02642436 ↗
18. S. J. Matas, R.F. Hehemann: Trans. Met. Soc. AIME 1961, vol. 221, pp. 179–185.
19. R. C. Thompson, M. K. Miller: Appl. Surf. Sci. 1996, vol. 46, pp. 2203–2213.
20. M. K. Miller, P. A. Beaven, G. D. W. Smith, S. S. Brenner: Proceedings International Conference of Solid-Solid Phase Transformations, 1981, pp. 863–67.
21. M. K. Miller, P. A. Beaven, G. D. W. Smith: Metall. Trans. 1981, vol. 12A, pp. 1197–1204.10.1007/BF02642333 ↗
22. M. K. Miller, P. A. Beaven, S. S. Brenner, G. D. W. Smith: Metall. Trans. 1983, vol. 14A, p. 1021.
23. W. S. Owen: Trans. A. S. M. 1954, vol. 46, p. 812.
24. S. J. Barnard, G. D. W. Smith, A. J. Garratt-Reed, J. Vander-Sande: in Advances in the Physical Metallurgy and Applications of Steels, 1982, p. 33.
25. L. Chang, G. D. W. Smith: J. Phys. 1984, vol. 45(9), p. 397.10.1051/jphyscol:1984966 ↗
26. E. V. Pereloma, I. B. Timokhina, M. K. Miller, P. D. Hodgson: Acta Mater. 2007, vol. 55, pp. 2587–2598.10.1016/j.actamat.2006.12.001 ↗
27. G. Ghosh, G. B. Olson: Acta Mater. 2002, vol. 50, pp. 2099–2199.10.1016/S1359-6454(02)00054-X ↗
28. H. K. D. H. Bhadeshia, M. Lord, L.-E. Svensson: Proceedings of International Conference: Joining and Welding Solutions to Industrial Problems: JWRI, Osaka University, Suita, 2003, pp. 43–52.
29. E. Kozeschnik, H. K. D. H. Bhadeshia: Mater. Sci. Technol. 2008, vol. 24, pp. 343–347.10.1179/174328408X275973 ↗
30. F. G. Caballero, M. K. Miller, C. G.-M. amd C. Capdevila, S. S. Babu: Acta Mater. 2008, vol. 56, pp. 188–199.10.1016/j.actamat.2007.09.018 ↗
31. M. J. Peet, S. S. Babu, M. K. Miller, H. K. D. H. Bhadeshia: Scr. Mater. 2004, vol. 50, pp. 1277–1281.10.1016/j.scriptamat.2004.02.024 ↗
32. D. J. Dyson, B. Holmes: J. Iron Steel Inst. 1970, vol. 208, p. 469.
33. M. J. Peet: LP2C: http://mathewpeet.org/thesis/programs/, 2009.
34. M. K. Miller, A. Cerezo, H. G. Hetherington, G. D. W. Smith: Atom Probe Field Ion Microscopy, Clarendon Press, Oxford, 1996.10.1093/oso/9780198513872.001.0001 ↗
35. O. C. Hellman, J. A. Vandenbroucke, J. Rüsing, D. Isheim, D. N. Seidman: Microsc. Microanal. 2000, vol. 6(5), pp. 437–444.10.1007/S100050010051 ↗
36. O. C. Hellman, D. N. Seidman: Mater. Sci. Eng. A 2002, vol. A327, pp. 24–28.10.1016/S0921-5093(01)01885-8 ↗
37. O. C. Hellman, J. B. du Rivage, D. N. Seidman: Ultramicroscopy 2000, 84:213e24.
38. F. G. Caballero, M. K. Miller, A. J. Clarke, C. Garcia-Mateo: Scr. Mater. 2010, vol. 63, 442–445.10.1016/j.scriptamat.2010.04.049 ↗
39. J. H. Jang, H. K. D. H. Bhadeshia, D. W. Suh: Scr. Mater. 2013, 68, pp. 195–198.10.1016/j.scriptamat.2012.10.017 ↗
40. C. N. Hulme-Smith, I. Lonardelli, A. C. Dippel, H. K. D. H. Bhadeshia: Scr. Mater. 2013, vol. 69 (5), pp. 409–412.10.1016/j.scriptamat.2013.05.035 ↗
41. C. N. Hulme-Smith, M. J. Peet, I. Lonardelli, A. C. Dippel, H. K. D. H. Bhadeshia: Mater. Sci. Technol. 2015, vol. 31 (2), pp. 254–256.10.1179/1743284714Y.0000000691 ↗
42. F. G. Caballero, M. K. Miller, C. Garcia-Mateo: Metall. Mater. Trans. A 2011, vol. 42A, pp. 3660–3668.10.1007/s11661-011-0699-7 ↗
43. S. S. Babu, K. Hono, T. Sakurai: Metall. Trans. 1994, vol. 25A, pp. 499–508.10.1007/BF02651591 ↗
44. R. C. Thompson, M. K. Miller: Acta Mater. 1998, vol. 46, pp. 2203–2213.10.1016/S1359-6454(97)00420-5 ↗
45. H. K. D. H. Bhadeshia, D. V. Edmonds: Met. Sci. 1979, vol. 13, pp. 325–334.
46. D. Kalish, M. Cohen: Mater. Sci. Eng. 1970, vol. 6, pp. 156–166.10.1016/0025-5416(70)90045-5 ↗
47. F. G. Caballero, M. K. Miller, S. S. Babu, C. Garcia-Mateo: Acta Mater. 2007, vol. 55, pp. 381–390.10.1016/j.actamat.2006.08.033 ↗
48. C. Garcia-Mateo, F. G. Caballero, H. K. D. H. Bhadeshia: J. Phys. 2003, vol. 112, pp. 17–25.
49. C. Garcia-Mateo, F. G. Caballero, H. K. D. H. Bhadeshia: ISIJ Int. 2003, vol. 43 (8), pp. 1238–1243.10.2355/isijinternational.43.1238 ↗