journal article·2017-03

Kinetics and Equilibrium of Age-Induced Precipitation in Cu-4 At. Pct Ti Binary Alloy

Satoshi Semboshi, Shintaro Amano, Jie Fu, Akihiro Iwase, Takayuki Takasugi

Publisher page

Abstract

Transformation kinetics and phase equilibrium of metastable and stable precipitates in age-hardenable Cu-4 at. pct Ti binary alloy have been investigated by monitoring the microstructural evolution during isothermal aging at temperatures between 693 K (420 °C) and 973 K (700 °C). The microstructure of the supersaturated solid solution evolves in four stages: compositional modulation due to spinodal decomposition, continuous precipitation of the needle-shaped metastable β′-Cu4Ti with a tetragonal structure, discontinuous precipitation of cellular components containing stable β-Cu4Ti lamellae with an orthorhombic structure, and eventually precipitation saturation at equilibrium. In specimens aged below 923 K (650 °C), the stable β-Cu4Ti phase is produced only due to the cellular reaction, whereas it can be also directly obtained from the intergranular needle-shaped β′-Cu4Ti precipitates in specimens aged at 973 K (700 °C). The precipitation kinetics and phase equilibrium observed for the specimens aged between 693 K (420 °C) and 973 K (700 °C) were characterized in accordance with a time–temperature–transformation (TTT) diagram and a Cu-Ti partial phase diagram, which were utilized to determine the alloy microstructure, strength, and electrical conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. R. Knights and P. Wilkers: Acta Metall., 1973, vol. 21, pp. 1503–14.10.1016/0001-6160(73)90180-6 ↗
2. D.E. Laughlin and J.W. Cahn: Acta Metall., 1975, vol. 23, pp. 329–39.10.1016/0001-6160(75)90125-X ↗
3. Datta and W.A. Soffa: Acta Metall., 1976, vol. 24, pp. 987–1001.10.1016/0001-6160(76)90129-2 ↗
4. A.W. Thompson and J.C. Williams: Metall. Trans. A, 1984, vol. 15A, pp. 931–7.10.1007/BF02644567 ↗
5. P.E. Donovan: J. Mater. Sci. Lett., 1985, vol. 4, pp. 1337–9.10.1007/BF00720095 ↗
6. W.A. Soffa and D.E. Laughlin: Acta Metall., 1989, vol. 37, pp. 3019–28.10.1016/0001-6160(89)90338-6 ↗
7. S. Nagarjuna, M. Srinivas, K. Balasubramanian, and D.S. Sarma: Acta Mater., 1996, vol. 44, pp. 2285–93.10.1016/1359-6454(95)00358-4 ↗
8. S. Nagarjuna, K. Balasubramanian, and D.S. Sarma: J. Mater. Sci., 1997, vol. 32, pp. 3375–85.10.1023/A:1018608430443 ↗
9. A.A. Hameda and L. Blaz: Mater. Sci. Eng. A, 1998, vol. 254, pp. 83–9.10.1016/S0921-5093(98)00753-9 ↗
10. C. Borchers: Philos. Mag. A, 1999, vol. 79, 537–47.10.1080/01418619908210315 ↗
11. S. Nagarjuna and D.S. Sarma: Scr. Mater., 1999, vol. 41, pp. 359–63.10.1016/S1359-6462(99)00187-6 ↗
12. W.A. Soffa and D.E. Laughlin: Prog. Mater. Sci., 2004, vol. 49, pp. 347–66.10.1016/S0079-6425(03)00029-X ↗
13. R. Markandeya, S. Nagarjuna, and D.S. Sarma: Mater. Sci. Eng. A, 2005, vol. 404, pp. 305–13.10.1016/j.msea.2005.05.072 ↗
14. S. Nagarjuna and M. Srinivas: Mater. Sci. Eng. A, 2005, vol. 406, pp. 186–94.10.1016/j.msea.2005.06.064 ↗
15. S. Semboshi and T.J. Konno: J. Mater. Res., 2008, vol. 23, pp. 473–7.10.1557/JMR.2008.0050 ↗
16. V. Lebreton, D. Panchoutinski, and Y. Bienvenu: Mater. Sci. Eng. A, 2009, vol. 508, pp. 83–92.10.1016/j.msea.2009.01.050 ↗
17. S. Semboshi, T. Nishida, H. Numakura, and R. Kirchheim: Metall. Mater. Trans. A, 2011, vol. 42, pp. 2136–43.10.1007/s11661-011-0637-8 ↗
18. L. Si, L. Zhou, X. Zhu, L. Sanhua, S. Leinuo, and D. Qiyi: Mater. Sci. Eng. A, 2016, vol. 650, pp. 345–53.10.1016/j.msea.2015.10.062 ↗
19. S. Semboshi, S. Sato, M. Ishikuro, K. Wagatsuma, A. Iwase, and T. Takasugi: Metall. Mater. Trans. A, 2014, vol. 45, 3401–11.10.1007/s11661-014-2293-2 ↗
20. L.A. Nesbit and D.E. Laughlin: Acta Metall., 1978, vol. 26, pp. 815–25.10.1016/0001-6160(78)90031-7 ↗
21. S. Sato, A. Hasegawa, S. Semboshi, and K. Wagatsuma: High Temp. Mater. Processes, 2015, vol. 34, pp. 123–30.10.1515/htmp-2014-0038 ↗
22. F. Findik: Mater. Des., 2012, vol. 42, pp. 131–46.10.1016/j.matdes.2012.05.039 ↗
23. S. Chen, Y.H. Duan, B. Huang, and W.C. Hu: Philos. Mag., 2015, vol. 95, pp. 3535–53.10.1080/14786435.2015.1091110 ↗
24. Y.D. Zhu, M.F.Yan, Y.X. Zhang, and C.S. Zhang: Comput. Mater. Sci., 2016, vol. 123, pp. 70–8.10.1016/j.commatsci.2016.06.015 ↗
25. R.C. Ecob, J.V. Bee, and B. Ralph: Phys. Status Solidi, 1979, vol. 52A, pp. 201–10.10.1002/pssa.2210520121 ↗
26. R.C. Ecob, J.V. Bee, and B. Ralph: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 1407–14.10.1007/BF02653496 ↗
27. R.W. Fonda and G.J. Shiflet: Scr. Metall., 1990, vol. 24, pp. 2259–62.10.1016/0956-716X(90)90075-R ↗
28. R.W. Fonda and G.J. Shiflet: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2507–18.10.1007/s11661-002-0372-2 ↗
29. T. Doi: Acta Metall., 1959, vol. 7, pp. 291–2.10.1016/0001-6160(59)90023-9 ↗
30. S. Ikeno, S. Saji, and S. Hori: J. Japan Inst. Met. Mater., 1974, vol. 38, pp. 446–51 (in Japanese).10.2320/jinstmet1952.38.5_446 ↗
31. C.R. Hutchinson, R.E. Hackenberg, and G.J. Shiflet: Ultramicroscopy, 2003, vol. 94, pp. 37–48.10.1016/S0304-3991(02)00193-6 ↗
32. S. Semboshi, M. Ishikuro, S. Sato, K. Wagatsuma, and T. Takasugi: Mater. Charact., 2013, vol. 82, pp. 23–31.10.1016/j.matchar.2013.04.016 ↗
33. C. Bellot and P. Lamesle: J. Alloys Compd., 2013, vol. 570, pp. 100-3.10.1016/j.jallcom.2013.03.057 ↗
34. M.A. Turchanin, P.G. Agraval, and A.R. Abdulov: Powder Metall. Met. Ceram., 2008, vol. 47, pp. 344–60.10.1007/s11106-008-9026-2 ↗
35. E. Raub, P. Walter, and H. Engel: Z. Metallkd., 1952, vol. 43, pp. 112-8.
36. M.J. Saarivirta and H.S. Cannon: Met. Prog., 1959, vol. 76, pp. 81-4.
37. V.N. Eremenko, Y.I. Buyanov, and S.B. Prima: Powder Metall. Met. Ceram., 1966, vol. 5, pp. 494-502.10.1007/BF00775543 ↗
38. V.N. Eremenko, Y.I. Buyanov, and N.M. Panchenko: Powder Metall. Met. Ceram., 1970, vol. 9, pp. 410-9.10.1007/BF00796511 ↗
39. G. Verger, J.M. Pelletier, and J. Merlin: J. Less-Common Met., 1979, vol. 64, pp. 175-83.10.1016/0022-5088(79)90169-3 ↗
40. J.-Y. Brun, S.-J.-H. Thibault, and C.-H. Allibert: Z. Metallkd., 1983, vol. 74, pp. 525-9.
41. N. Karlsson: J. Inst. Met., 1951, vol. 78, pp. 391–405.
42. J. Miyake and M.E. Fine: Acta Metall., 1992, vol. 40, pp. 733–41.10.1016/0956-7151(92)90015-7 ↗
43. S. Suzuki, K. Hirabayashi, H. Shibata, K. Mimura, M. Isshiki, and Y. Waseda: Scr. Mater., 2003, vol. 48, pp. 431–5.10.1016/S1359-6462(02)00441-4 ↗
44. R. Landauer: J. Appl. Phys., 1952, vol. 23, pp. 779–84.10.1063/1.1702301 ↗
45. S. Semboshi, S. Yamauchi, and H. Numakura: Mater. Trans., 2013, vol. 54, pp. 520–7.10.2320/matertrans.M2012423 ↗