Co Effect on As-cast and Heat-Treated Microstructures in Ru-Containing Single-Crystal Superalloys
Source abstract
Abstract
The effect of Co on the as-cast and heat-treated microstructures was investigated in two experimental Ni-based single-crystal superalloys containing low levels of Re and Ru. The experimental results indicated that increasing the Co content from 7.9 to 15.8 wt pct decreased the volume fraction of (γ + γ′) eutectic and the solidification segregation ratio of W. High levels of Co additions were also found to decrease the solvus temperatures of the γ′ phase and (γ + γ′) eutectic as well as the solidus temperature. During the long-term thermal exposure at 1373 K (1100 °C), no TCP phases precipitated in either alloy. However, the coarsening and coalescence of γ′ precipitates in the alloy containing 15.8 wt pct Co was slower than that in the other alloy with 7.9 wt pct Co. In the current study, high levels of Co additions decreased the equilibrium volume fraction of γ′ phase, leading to a change in the partitioning ratios of TCP-forming elements Cr, Mo, Re, and W between the γ and γ′ phases. This change resulted in a lower degree of elemental supersaturation in the γ matrix and improved the phase stability of the γ/γ′ microstructure. These experimental results were then compared with those obtained from multi-component thermodynamic calculations, and good agreement was observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. R.C. Reed: The superalloys: Fundamentals and applications. Cambridge University Press, Cambridge, UK, 2006, pp. 147.10.1017/CBO9780511541285 ↗
2. T.M. Pollock and S. Tin: J. Propul. Power, 2006, vol. 22, pp. 361-74.10.2514/1.18239 ↗
3. D. Argence, C. Vernault, Y. Desvallees, and D. Fournier: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S.L. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 829–37.10.7449/2000/Superalloys_2000_829_837 ↗
4. K.S. O’Hara, W.S. Walston, and E.W. Ross: U.S. Patent No. 5482789, 1996.
5. Q. Feng, T.K. Nandy, S. Tin and T.M. Pollock: Acta Mater., 2003, vol. 51, pp. 269-84.10.1016/S1359-6454(02)00397-X ↗
6. S. Walston, A. Cetel, R. MacKay, K. O’Hara, D. Duhl, and R. Dreshfield: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 15–24.10.7449/2004/Superalloys_2004_15_24 ↗
7. L.J. Carroll, Q. Feng and T.M. Pollock: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1290-307.10.1007/s11661-008-9520-7 ↗
8. B. Beeston, I. Dillamore and R. Smallman: Metal Science, 1968, vol. 2, pp. 12-14.10.1179/030634568790443468 ↗
9. R.N. Jarrett, J.P. Collier, and J.K. Tien: in Superalloys 1984, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., TMS, Warrendale, PA, 1984, pp. 455–66.10.7449/1984/Superalloys_1984_455_466 ↗
10. M. Nathal, R. Maier and L. Ebert: Metall. Trans. A, 1982, vol. 13, pp. 1775-83.10.1007/BF02647833 ↗
11. C.H. Lund, M.J. Woulds, and J. Hockin: in Superalloys 1968, M.J. Donachie, ed., TMS, Warrendale, PA, 1968, pp. 25–46.
12. T.E. Strangman, G.S. Hoppin III, C.M. Phipps, K. Harris, and R.E. Schwer: in Superalloys 1980, J.K. Tien, S.T. Wlodek, M.I. Hugh, M. Gell, and G.E. Maurer, eds., TMS, Warrendale, PA, 1980, pp. 215–24.10.7449/1980/Superalloys_1980_215_224 ↗
13. R. Bürgel, J. Grossmann, O. Lusebrink, H. Mughrabi, F. Pyczak, R.F. Singer, and A. Volek: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 25–34.10.7449/2004/Superalloys_2004_25_34 ↗
14. W.Z. Wang, T. Jin, J.L. Liu, X.F. Sun, H.R. Guan and Z.Q. Hu: Mater. Sci. Eng. A, 2008, vol. 479, pp. 148-56.10.1016/j.msea.2007.06.031 ↗
15. G.L. Erickson: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 35–44.10.7449/1996/Superalloys_1996_35_44 ↗
16. E.C. Caldwell, F.J. Fela, and G.E. Fuchs: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 811–18.10.7449/2004/Superalloys_2004_811_818 ↗
17. M. Nathal and L. Ebert: Metall. Trans. A, 1985, vol. 16A, pp. 1849-62.10.1007/BF02670372 ↗
18. W.Z. Wang, T. Jin, N.R. Zhao, Z.H. Wang, X.F. Sun, H.R. Guan, and Z.Q. Hu: Trans. Nonferrous Met. Soc. China, 2006, vol. 16, pp. 1978–81.
19. C. Liu, K. Li, J. Shen, J. Zhang and L. Lou: Metall. Mater. Trans. A, 2012, vol. 43, pp. 405-09.10.1007/s11661-011-1023-2 ↗
20. S. Neumeier, M. Dinkel, F. Pyczak and M. Goken: Mater. Sci. Eng. A, 2011, vol. 528, pp. 815-22.10.1016/j.msea.2010.09.065 ↗
21. C.M.F. Rae and R.C. Reed: Acta Mater., 2001, vol. 49, pp. 4113-25.10.1016/S1359-6454(01)00265-8 ↗
22. W.S. Walston, J.C. Schaeffer, and W.H. Murphy: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 9–18.10.7449/1996/Superalloys_1996_9_18 ↗
23. M. Gungor: Metall. Trans. A, 1989, vol. 20, pp. 2529-33.10.1007/BF02666687 ↗
24. R.A. Hobbs, S. Tin, C.M.F. Rae, R.W. Broomfield, and C.J. Humphreys: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 819–25.10.7449/2004/Superalloys_2004_819_825 ↗
25. R.M. Kearsey, J.C. Beddoes, K.M. Jaansalu, W.T. Thompson, and P. Au: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 801–10.10.7449/2004/Superalloys_2004_801_810 ↗
26. Q. Feng, L.J. Carroll and T.M. Pollock: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1949-62.10.1007/s11661-006-0137-4 ↗
27. A. Elliott, T. Pollock, S. Tin, W. King, S.C. Huang and M. Gigliotti: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3221-31.10.1007/s11661-004-0066-z ↗
28. W.S. Tang, J. Shen, D.W. Wang, J. Zhang, and L.H. Lou: in 138th TMS Annual Meeting and Exhibition, TMS, San Francisco, CA, 2009, pp. 241–47.
29. C.T. Sims, N.S. Stoloff and W.C. Hagel: Superalloys II. Wiley, New York, 1987, pp. 198.
30. R. Darolia, D.F. Lahrman, and R.D. Field: in Superalloys 1988, D.N. Duhl, G. Maurer, S. Antolovich, C. Lund and S. Reichman, eds., TMS, Warrendale, PA, 1988, pp. 255–64.10.7449/1988/Superalloys_1988_255_264 ↗
31. L.J. Carroll, Q. Feng, J.F. Mansfield and T.M. Pollock: Mater. Sci. Eng. A, 2007, vol. 457, pp. 292-99.10.1016/j.msea.2006.12.036 ↗
32. Y. Han, W. Ma, Z. Dong, S. Li, and S. Gong: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 91–97.10.7449/2008/Superalloys_2008_91_97 ↗
33. R.C. Reed, A.C. Yeh, S. Tin, S.S. Babu and M.K. Miller: Scripta Mater., 2004, vol. 51, pp. 327-31.10.1016/j.scriptamat.2004.04.019 ↗
34. T. Yokokawa, M. Osawa, K. Nishida, T. Kobayashi, Y. Koizumi and H. Harada: Scripta Mater., 2003, vol. 49, pp. 1041.10.1016/S1359-6462(03)00437-8 ↗
35. R.A. Hobbs, L. Zhang, C.M.F. Rae and S. Tin: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1014-25.10.1007/s11661-008-9490-9 ↗
36. A. Volek, F. Pyczak, R.F. Singer and H. Mughrabi: Scripta Mater., 2005, vol. 52, pp. 141-45.10.1016/j.scriptamat.2004.09.013 ↗
37. J.Y. Chen, Q. Feng, L.M. Cao and Z.Q. Sun: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3791-98.10.1016/j.msea.2011.01.060 ↗
38. M. Fahrmann, P. Fratzl, O. Paris, E. Fahrmann and W.C. Johnson: Acta Metall. Mater., 1995, vol. 43, pp. 1007-22.10.1016/0956-7151(94)00337-H ↗