journal article·2011-07Open access

Strain Mode Dependence of Deformation Texture Developments: Microstructural Origin

S. Raveendra, A. K. Kanjarla, H. Paranjape, S. K. Mishra, S. Mishra, L. Delannay, I. Samajdar, P. Van Houtte

Abstract

Fully recrystallized commercial-purity aluminum sheets were deformed by limiting dome height tests, the following strain modes: uniaxial tension (US), near plane strain tension (PS), and equibiaxial tension (BS) were identified using standard procedure. The deformation texture developments differed significantly depending on the strain mode. Although the full constraints Taylor (FCT) model captured the texture developments in US, it failed to reproduce deformation textures in PS and especially in BS. The Advanced LAMEL (ALAMEL) model and the crystal plasticity finite element method (CPFEM) were, however, successful with respect to all three strain modes. Microtexture data brought out interesting observations of orientation gradients. First, the orientation gradients increased from US to PS to BS. Second, such gradients were mostly around initial (or prior deformation) grain boundary regions. A simple algorithm, and an associated computer program, was developed to demarcate such near boundary gradient zones (NBGZs). The area fraction and severity of NBGZ seemed to affect the texture development; FCT was reasonably successful at low NBGZ, whereas high NBGZ required the ALAMEL and the CPFEM models that are capable of addressing strain heterogeneity and grain interactions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307-24.
2. D. Raabe: Mater. Sci. Eng. A, 1995, vol. 197A, pp. 31-37.10.1016/0921-5093(94)09770-4 ↗
3. W. Robert, D. Piot, and J.H. Driver: Scripta Mater., 2004, vol. 50, pp. 1215-19.10.1016/j.scriptamat.2004.02.007 ↗
4. O. Engler, M. Crumbach, and S. Li: Acta Mater., 2005, vol. 53, pp. 2241-57.10.1016/j.actamat.2005.01.032 ↗
5. P. Van Houtte, A.K. Kanjarla, A. Van Bael, M. Seefeldt, and L. Delannay: Eur. J. Mech. Solids, 2006, vol. 25, pp. 634-48.10.1016/j.euromechsol.2006.05.003 ↗
6. T. Leffers and R.K. Ray: Progr. Mater. Sci., 2009, vol. 54, pp. 351-96.10.1016/j.pmatsci.2008.09.002 ↗
7. A.K. Kanjarla, P. Van Houtte, and L. Delannay: Int. J. Plast., 2010, vol. 26, pp. 1220-33.10.1016/j.ijplas.2009.05.005 ↗
8. L. Delannay, S.R. Kalidindi, and P. Van Houtte: Mater. Sci. Eng. A, 2002, vol. 336A, pp. 233-44.10.1016/S0921-5093(01)01966-9 ↗
9. G.C. Butler and D.L. Mc Dowell: Int. J. Plast., 1998, vol. 14, pp. 703-17.10.1016/S0749-6419(98)00018-7 ↗
10. P. Van Houtte, S. Li, M. Seefeldt, and L. Delannay: Int. J. Plast., 2005, vol. 21, pp. 589-624.10.1016/j.ijplas.2004.04.011 ↗
11. L. Delannay, P.J. Jacques, and S.R. Kalidindi: Int. J. Plast., 2006, vol. 22, pp. 1879-98.10.1016/j.ijplas.2006.01.008 ↗
12. J.W. Yoon, F. Barlat, J.J. Gracio, and E. Rauch: Int. J. Plast., 2005, vol. 21, pp. 2426-47.10.1016/j.ijplas.2005.03.014 ↗
13. D.P. Mika and P.R. Dawson: Mater. Sci. Eng. A., 1998, vol. 257A, pp. 62-76.10.1016/S0921-5093(98)00824-7 ↗
14. F. Barbe, S. Forest, and G. Callietaud: Int. J. Plast., 2001, vol. 17, pp. 537-63.10.1016/S0749-6419(00)00062-0 ↗
15. O. Diard, S. Leclercq, G. Rousselier, and G. Cailletaud: Int. J. Plast., 2005, vol. 21, pp. 691-722.10.1016/j.ijplas.2004.05.017 ↗
16. F. Delaire, J.L. Raphanel, and C. Rey: Acta Mater., 2000, vol. 48, pp. 1075-87.10.1016/S1359-6454(99)00408-5 ↗
17. U. Lienert, T.S. Han, J. Almer, P.R. Dawson, T. Leffers, L. Margulies, S.F. Nielsen, H.F. Poulsen, and S. Schmidt: Acta Mater., 2004, vol. 52, pp. 4461-67.10.1016/j.actamat.2004.05.051 ↗
18. A. Musienko, A. Tatschl, K. Schmidegg, O. Kolednik, R. Pippan, and G. Cailletaud: Acta Mater., 2007, vol. 55, pp. 4121-36.10.1016/j.actamat.2007.01.053 ↗
19. D. Raabe, M. Sachtleber, Z. Zhao, and S. Zaefferer: Acta Mater., 2001, vol. 49, pp. 3433-41.10.1016/S1359-6454(01)00242-7 ↗
20. R.A. Lebensohn, R. Brenner, O. Castelnau, and A.D. Rollett: Acta Mater., 2008, vol. 56, pp. 3914-26.10.1016/j.actamat.2008.04.016 ↗
21. D. Raabe, Z. Zhao, and W. Mao: Acta Mater., 2002, vol. 50, pp. 4379-94.10.1016/S1359-6454(02)00276-8 ↗
22. A. Molinari, G.R. Canova, and S. Ahzi: Acta Metall.,1987, vol. 35, pp. 2983-94.10.1016/0001-6160(87)90297-5 ↗
23. R.A. Lebensohn and C.N. Tomé: Acta Metall. Mater., 1993, vol. 41, pp. 2611-24.10.1016/0956-7151(93)90130-K ↗
24. C.A. Bronkhorst, S.R. Kalidindi, and L. Anand: Phil. Trans. R. Soc. Lond., 1992, vol. A341, pp. 443-77.10.1098/rsta.1992.0111 ↗
25. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-Mechanical Processing of Metallic Materials, Pergamon Materials Series, R.W. Cahn, ed., Elsevier, Amsterdam, The Netherlands, 2007.
26. B. Bay, N. Hansen, D. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205-19.10.1016/0956-7151(92)90296-Q ↗
27. J.A. Wert, X. Huang, G. Winther, W. Pantleon, and H.F. Poulsen: Mater. Today, 2007, vol. 9, pp. 24-32.10.1016/S1369-7021(07)70206-7 ↗
28. A.K. Kanjarla, L. Delannay, and P. Van Houtte: 2010, Metall. Mater. Trans. A, in press.
29. N. Hansen and D.J. Jensen: Phil. Trans. R. Soc. Lond. A, 1999, vol. 357, pp. 1447-69.10.1098/rsta.1999.0384 ↗
30. J. Gil Sevillano, P. Van Houtte, and E. Aernoudt: Progr. Mater. Sci., vol. 25, pp. 69–412.10.1016/0079-6425(80)90001-8 ↗
31. D. Kuhlmann-Wilsdorf and N. Hansen: Scripta Metall. Mater., 1991, vol. 25, pp. 1557-62.10.1016/0956-716X(91)90451-6 ↗
32. Q. Liu, D.J. Jensen, and N. Hansen: Acta Mater., 1998, vol. 46, pp. 5819-38.10.1016/S1359-6454(98)00229-8 ↗
33. D.K.-Wilsdorf: Phil. Mag., 1999, vol. 79A, pp. 955-1008.10.1080/01418619908210342 ↗
34. B. Bay, N. Hansen, and D.K.-Wilsdorf: Mater. Sci. Eng. A, 1989, vol. 113A, pp. 385-97.10.1016/0921-5093(89)90325-0 ↗
35. N. Hansen: Mater. Sci. Technol., 1990, vol. 6, pp. 1039-47.10.1179/mst.1990.6.11.1039 ↗
36. D.A. Hughes and A. Godfrey: Proc. Hot deformation of Aluminum Alloys II, 1998, pp. 23–36.
37. N. Hansen: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2917-35.10.1007/s11661-001-0167-x ↗
38. X. Haung: Scripta Mater., 1998, vol. 38, pp. 1697-703.10.1016/S1359-6462(98)00051-7 ↗
39. G.L. Wu, A. Godfrey, W. Liu, and Q. Liu: Scripta Mater., 2001, vol. 45, pp. 1117-22.10.1016/S1359-6462(01)01091-0 ↗
40. F. Basson and J.H. Driver: Acta. Mater., 2000, vol. 48, pp. 2101-15.10.1016/S1359-6454(00)00042-2 ↗
41. S.R. Kalidindi, A. Bhattacharya, and R.D. Doherty: Proc. R. Soc. Lond., 2004, vol. 460A, pp. 1935-56.10.1098/rspa.2003.1260 ↗
42. I.L. Dillamore, P.L. Morris, C.J.E. Smith, and W.B. Hutchinson: Proc. R. Soc. Lond. A, 1972, vol. 329A, pp. 405-20.
43. J.A. Wert, Q. Liu, and N. Hansen: Acta Mater., 1997, vol. 45, pp. 2565-76.10.1016/S1359-6454(96)00348-5 ↗
44. L. Delannay, O.V. Mishin, D.J. Jensen, and P. Van Houtte: Acta Mater., 2001, vol. 49, pp. 2441-51.10.1016/S1359-6454(01)00150-1 ↗
45. S.K. Mishra, P. Pant, K. Narasimhan, A.D. Rollet, and I. Samajdar, Scripta Mater., 2009, vol. 61, pp. 273-76.10.1016/j.scriptamat.2009.03.062 ↗
46. L.S. Tóth, Y. Estrin, R. Lapovok, and C. Gu: Acta Mater., 2010, vol. 58, pp. 1782-94.10.1016/j.actamat.2009.11.020 ↗
47. G. Thorning, M.A.J. Somers, and J.A. Wert: Mater. Sci. Eng. A, 2005, vol. 397A, pp. 215-28.10.1016/j.msea.2005.02.043 ↗
48. R. Becker and S. Panchanandeswaran: Acta Metall. Mater., 1995, vol. 7, pp. 2701-19.10.1016/0956-7151(94)00460-Y ↗
49. R. Becker: Acta Metall. Mater., 1991, vol. 6, pp. 1211-30.10.1016/0956-7151(91)90209-J ↗
50. H.F. Poulsen, L. Margulies, S. Schmidt, and G. Winther: Acta Mater., 2003, vol. 51, pp. 3821-30.10.1016/S1359-6454(03)00206-4 ↗
51. S. Van Boxel, M. Seefeldt, B. Verlinden, and P. Van Houtte: J. Microsc., 2005, vol. 218, pp. 104-14.10.1111/j.1365-2818.2005.01467.x ↗
52. H. Paul, J.H. Driver, and W. Wajda: Mater. Sci. Eng. A, 2008, vol. 477A, pp. 282-94.10.1016/j.msea.2007.05.044 ↗
53. L. Delannay, R.E. Logé, Y. Chastel, and P. Van Houtte: Adv. Eng. Mater., 2003, vol. 8, pp. 597-600.10.1002/adem.200300376 ↗
54. T. Leffers: Int. J. Plast., 2001, vol. 17, pp. 491-511.10.1016/S0749-6419(00)00060-7 ↗
55. M. Seefeldt, L. Delannay, B. Peeters, E. Aernoudt, and P. Van Houtte: Acta Mater., 2001, vol. 49, pp. 2129-43.10.1016/S1359-6454(01)00126-4 ↗
56. M. Sachtleber, Z. Zhao, and D. Raabe: Mater. Sci. Eng. A, 2002, vol. 336A, pp. 81-7.10.1016/S0921-5093(01)01974-8 ↗
57. L.S. Toth, P. Gilormini, and J.J. Jonas: Acta Metall., vol. 36, pp. 3077–91.10.1016/0001-6160(88)90045-4 ↗
58. S.K. Mishra: Ph.D. Dissertation, IIT, Bombay, India, 2009.
59. S.K. Mishra, S.G. Desai, P. Pant, K. Narasimhan, and I. Samajdar: Int. J. Mater. Form, 2009, vol. 2, pp. 59-67.10.1007/s12289-009-0391-2 ↗
60. S.S. Hecker: Mech. Eng. Q., 1974, vol. 14, pp. 30-36.
61. S.S. Hecker: Sheet Metal Industries, 1975, vol. 58, pp. 671-76.
62. S. Raveendra, S. Mishra, K.V. Mani Krishna, H. Weiland, and I. Samajdar: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2760–71.10.1007/s11661-008-9620-4 ↗
63. P. Van Houtte: The MTM-FHM Software System, version 2, MTM-KULeuven, Brussels, Belgium, 1995.
64. H.J. Bunge: Texture Analysis in Materials Science, Butterworths, London, UK, 1982.
65. L.S. Toth and P. Van Houtte: Text. Microstruct., 1992, vol. 19, pp. 229-44.10.1155/TSM.19.229 ↗
66. S. Cicale, I. Samajdar, B. Verlinden, G. Abbruzzese, and P. Van Houtte: ISIJ Int., 2002, vol. 42, pp. 770-78.10.2355/isijinternational.42.770 ↗
67. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2863-62.10.1016/0001-6160(88)90172-1 ↗
68. Y. Zhou and K.W. Neale: Acta Mater., 1994, vol. 42, pp. 2175-89.10.1016/0956-7151(94)90041-8 ↗
69. A. Ray and B.J. Diak: Scripta Mater., 2010, vol. 62, pp. 606-09.10.1016/j.scriptamat.2010.01.003 ↗