journal article·2012-12

Studies on Nb Microalloying of 13Cr Super Martensitic Stainless Steel

Xiaoping Ma, Lijun Wang, Sundaresa V. Subramanian, Chunming Liu

Publisher page

Abstract

The effect of Nb microalloying on microstructure, mechanical properties, and pitting corrosion properties of quenched and tempered 13 pct Cr-5 pct Ni-0.02 pct C martensitic stainless steels with different Mo and N contents was investigated. The microstructure, density, and dispersion of high-angle boundaries, nanoscale precipitates, and amount of retained austenite were characterized by using electron backscattered diffraction, transmission electron microscopy, and X-ray diffraction to correlate with properties. The results show that the combined effects of lowering nitrogen content in 13 pct Cr-5 pct Ni-1~2 pct Mo-0.02 pct C steels to 0.01 wt pct, and adding 0.1 pct Nb are to decrease the amount of Cr-rich precipitates, as Nb preferentially combines with residual carbon and nitrogen to form carbonitrides, suppressing the formation of Cr2N and Cr23C6. Austenite grain refinement can be achieved by Nb microalloying through proper heat treatment. If the nitrogen content is kept high, then Cr-rich precipitates would occur irrespective of microalloying addition. The NbN would also occur at high temperature, which will act as substrate for nucleation of coarse precipitates during subsequent tempering, impairing the toughness of the steel. It was shown that the addition of Nb to low interstitial super martensitic stainless steel retards the formation of reversed austenite and results in the formation of nanoscale precipitates (5 to 15 nm), which contribute to a significant increase in strength. More importantly, the pitting corrosion resistance was found to increase with Nb addition. This is attributed to suppression of Cr-rich precipitates, which can cause local depletion of Cr in the matrix and the initiation of pitting corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. C.P. Linne, F. Blanchard, G.C. Guntz, and B.J. Orlans-Joliet: NACE Annual Conference, Corrosion/97, Orleans, 1997, no. 28.
2. A.G. Haynes: Proc. Conf. Supermartensitic Stainless Steels, 1999, pp. 25–32.
3. W. Heimann, T. Ladwewein, and G. Nirosta: Proc. Conf. Supermartensitic Stainless Steels, Brussels, Belgium, 2002, pp. 3–9.
4. L.M. Smith and M. Celant: Proc. Conf. Supermartensitic Stainless Steels, Brussels, Belgium, 1999, pp. 66–73.
5. H. Heuser, C. Jochum, E Perteneder, and J. Tosch: Proc. Conf. Supermartensitic Stainless Steels, Brussels, Belgium, 1999, pp. 150–59.
6. P. Toussaint and J.J. Dufrane: Proc. Conf. Supermartensitic Stainless Steels, Brussels, Belgium, 2002, pp. 23–27.
7. B. Qin, Z.Y. Wang, and Q.S. Sun: Mater. Charact., 2008, vol. 59, pp. 1096–1100.10.1016/j.matchar.2007.08.025 ↗
8. P.D. Bilmes, M. Solari, and C.L. Llorente: Mater. Charact., 2001, vol. 46, pp. 285–96.10.1016/S1044-5803(00)00099-1 ↗
9. D.S. Leem, Y.D. Leeb, J.H. Jun, and C.S. Choi: Scripta Mater., 2001, vol. 45, pp. 767–72.10.1016/S1359-6462(01)01093-4 ↗
10. E.S. Park, D.K. Yoo, J.H. Sung, C.Y. Kang, J. Lee, and J.H. Sung: Metall. Mater. Int., 2004, vol. 6, pp. 521–25.10.1007/BF03027413 ↗
11. M.A. Dawood, I.S.E. Mahallawi, M.E.A.E. Azim, and M.R.E. Koussy: Mater. Sci. Technol., 2004, vol. 20, pp. 363–69.10.1179/026708304225011135 ↗
12. Y.Y. Song, D.H. Ping, F.X. Yin, X.Y. Li, and Y.Y. Li: Mater. Sci. Eng. A, 2010, vol. 527, pp. 614–18.10.1016/j.msea.2009.08.022 ↗
13. H. Nakamichi, K. Sato, Y. Miyata, M. Kimura, and K. Masamura: Corrosion Sci., 2008, vol. 50, pp. 309–15.10.1016/j.corsci.2007.08.004 ↗
14. C.A.D. Rodrigues, P.L.D. Lorenzo, A. Sokolowski, C.A. Barbosa, and J.M.D.A. Rollo: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 149–52.10.1016/j.msea.2007.01.016 ↗
15. E. Ladanova, J.K. Solberg, and T. Rogne: Corrosion Eng. Sci. Technol., 2006, vol. 41, pp. 143–51.10.1179/174327806X107914 ↗
16. H.Y. Ha and H.S. Kwon: Electrochim. Acta, 2007, vol. 52, pp. 2175–80.10.1016/j.electacta.2006.08.034 ↗
17. J.O. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685–700.10.1179/mst.1992.8.8.685 ↗
18. G. Cumino and M. Barteri: US patent No.:5944921, 1999.
19. T. Gladman: Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, U.K., 1997, pp. 82–87.
20. P. Wang, S.P. Lu, N.M. Xiao, D.Z. Li, and Y.Y. Li: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3210–16.10.1016/j.msea.2010.01.085 ↗
21. K. Kondo, K. Ogawa, H. Amaya, M. Ueda, and H. Ohtani: Proc. Conf. the Twelfth Int. Offshore and Polar Engineering, Kitakyushu, Japan, 2002, pp. 26–31.
22. S.V. Subramanian and G.C. Weatherly: Proc. Conf. Titanium Technology in Microalloyed Steels, 1997, pp. 133–47.
23. T. Gladman: Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, U.K., 1997, pp. 47–54.
24. W.V. Gestel: Corrosion 2004, 2004, Paper No. 04141.