journal article·2005-09

Reaction products of Al/TiC composites fabricated by the pressureless infiltration technique

K. B. Lee, H. S. Sim, H. Kwon

Publisher page

Abstract

The interfacial reaction products of the Al-Mg/TiC p composite fabricated by the pressureless infiltration method were analyzed using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and transmission electron microscopy (TEM). During the fabrication of composites, reaction products with various morphologies and sizes were formed in the A1 matrix as well as in the vicinity of the TiC particles by the interfacial reaction between the Al alloy and the TiC particles. From the EDS and selected-area diffraction pattern (SADP) analysis, Al4C3, Al18Ti2Mg3, Ti2AlC, Al3Ti, and TiAl could be identified to form as interfacial reaction products. Both the size and the amount of the reaction products were increased with increasing fabrication temperature as well as fabrication time. Coarse Al3Ti was barely observed in water-quenched composites, while it was observed at all fabrication temperatures (700 °C to 1000 °C) in furnace-cooled conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A. Banerji and W. Reif: Metall. Mater. Trans. A, 1994, vol. 16A, pp. 2065–68.
2. P.S. Mohanty and J.E. Gruzleski: Scripta Metall. Mater., 1994, vol. 31, pp. 179–84.10.1016/0956-716X(94)90171-6 ↗
3. P.S. Mohanty and J.E. Gruzleski: Acta Mater., 1996, vol. 44, pp. 3749–60.10.1016/1359-6454(96)00021-3 ↗
4. P. Sahoo and M.J. Koczak: Mater. Sci. Eng. A, 1991, vol. 131, pp. 69–76.10.1016/0921-5093(91)90345-N ↗
5. H. Nakata, T. Choh, and N. Kanetake: J. Mater. Sci., 1995, vol. 30, pp. 1719–27.10.1007/BF00351601 ↗
6. R. Mitra, J.R. Weertman, M.E. Fine, and R.M. Aikin, Jr: Proc. Conf. on the Developments in Ceramic and Metal-Matrix Composites, K. Upadhaya, ed., TMS, Warrendale, PA, 1991, pp. 125–42.
7. A.R. Kennedy, D.P. Weston, and M.I. Jones: Mater. Sci. Eng. A, 2001, vol. 316, pp. 32–38.10.1016/S0921-5093(01)01228-X ↗
8. A.R. Kennedy and S.M. Wyatt: Compo. Part A, 2001, vol. 32, pp. 555–59.10.1016/S1359-835X(00)00052-X ↗
9. A.E. Karantzalis, S. Wyatt, and A.R. Kennedy: Mater. Sci. Eng. A, 1997, vol. 237, pp. 200–6.10.1016/S0921-5093(97)00290-6 ↗
10. V.H. López, C.A. León, R.A.L. Drew, and E. Bedolla: J. Mater. Sci., 2002, vol. 37, pp. 3509–14.10.1023/A:1016523408906 ↗
11. K. Satyaprasad, Y.R. Mahajan, and V.V. Bhanuprasad: Scripta Metall. Mater., 1992, vol. 26, pp. 711–16.10.1016/0956-716X(92)90425-E ↗
12. L. Svendsen and A. Jarfors: Mater. Sci. Technol., 1993, vol. 9, pp. 948–57.10.1179/mst.1993.9.11.948 ↗
13. A.R. Kennedy, D.P. Weston, M.I. Jones, and C. Enel: Scripta Mater., 2000, vol. 42, pp. 1187–92.10.1016/S1359-6462(00)00356-0 ↗
14. T. Nukami and M.C. Flemings: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1877–92.10.1007/BF02670775 ↗
15. W.C. Lee and S.L. Chung: J. Am. Ceram. Soc., 1997, vol. 80, pp. 53–61.10.1111/j.1151-2916.1997.tb02790.x ↗
16. Y. Choi and S.W. Lee: J. Mater. Sci., 1993, vol. 28, pp. 6669–75.10.1007/BF00356413 ↗
17. I.-H. Song, D.K. Kim, Y.-D. Hahn, and H.-D. Kim: Scripta Mater., 2003, vol. 48, pp. 413–18.10.1016/S1359-6462(02)00435-9 ↗
18. A.E.W. Jarfors, L. Svendsen, M. Wallinder, and H. Fredriksson: Metall. Trans. A, 1993, vol. 24A, pp. 2577–83.10.1007/BF02646536 ↗
19. W.H. Jiang, G.H. Song, X.L. Han, C.L. He, and H.C. Ru: Mater. Lett., 1997, vol. 32, pp. 63–65.10.1016/S0167-577X(97)00011-6 ↗
20. A.R. Kennedy and S.M. Wyatt: Compo. Sci. Technol., 2000, vol. 60, pp. 307–14.10.1016/S0266-3538(99)00125-6 ↗
21. D. Muscat, K. Shanker, and R. Ral: Mater. Sci. Technol., 1992, vol. 8, pp. 971–76.10.1179/mst.1992.8.11.971 ↗
22. A. Albiter, C.A. León, R. Drew, and E. Bedolla: Mater. Sci. Technol., 2000, vol. 289A, pp. 109–15.
23. B. Yang, GF. Wang, and J. Zhang: Acta Mater., 2003, vol. 51, pp. 4977–89.10.1016/S1359-6454(03)00292-1 ↗
24. B. Yang, G. Chen, and J. Zhang: Mater. Des., 2001, vol. 22, pp. 645–50.10.1016/S0261-3069(01)00029-2 ↗
25. A.B. Pandey, R.S. Mishra, and Y.R. Mahajan: Mater. Sci. Eng. A, 1996, vol. 206, pp. 270–78.10.1016/0921-5093(95)09998-0 ↗
26. M.E. Fine and J.G. Conley: Metall. Trans. A, 1990, vol. 21A, pp. 2609–10.10.1007/BF02647010 ↗
27. J.C. Schuster, H. Nowotny, and C. Vaccaro: J. Solid State Chem., 1980, vol. 32, pp. 213–19.10.1016/0022-4596(80)90569-1 ↗
28. K.S. Prasad, Y.R. Mahajan, and V.V. Bhanuprasad: Scripta Metall. Mater., 1991, vol. 26, pp. 125–30.
29. A. Contreras, E. Bedolla, and R. Peerez: Acta Mater., 2004, vol. 52, pp. 985–94.10.1016/j.actamat.2003.10.034 ↗
30. A. Jarfors, H. Fredriksson, and L. Froyen: Mater. Sci. Eng. A, 1991, vol. 135, pp. 119–23.10.1016/0921-5093(91)90547-Z ↗
31. W.M. Zhong, G.L. Espérance, and M. Suéry: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2637–46.10.1007/BF02669421 ↗
32. K.B. Lee, J.P. Ahn, and H. Kwon: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1007–17.10.1007/s11661-001-0358-5 ↗
33. K.B. Lee, H.S. Sim, S.Y. Cho, and H. Kwon: Mater. Sci. Eng. A, 2001, vol. 302, pp. 227–34.10.1016/S0921-5093(00)01831-1 ↗
34. K.B. Lee, H.S. Sim, S.H. Kim, K.H. Han, and H. Kwon: J. Mater. Sci., 2001, vol. 36, pp. 3179–88.10.1023/A:1017978117837 ↗
35. J.F. Shackelford, W. Alexander, and J.S. Park, eds., CRC Materials Science Engineering Handbook, CRC, Boca Raton, FL, 1994, p. 43.
36. N. Frage, N. Frumin, L. Levin, M. Polak, and M.P. Dariel: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1341–45.10.1007/s11661-998-0260-5 ↗
37. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworth Ltd., London, 1976, pp. 385–88.10.1016/B978-0-408-70932-3.50088-7 ↗