journal article·2010-01

Study of Forming Limit for Rotational Incremental Sheet Forming of Magnesium Alloy Sheet

Jingee Park, Jeounghan Kim, Nhokwang Park, Youngsuk Kim

Publisher page

Abstract

As a lightweight material, magnesium is being increasingly used for automotive parts. However, due to a hexagonal-closed-packed (hcp) crystal structure, in which only the basal plane can move, magnesium alloy sheets exhibit a low ductility and formability at room temperature. Press forming of magnesium alloy sheets is conventionally performed at elevated temperatures of 200 °C to 250 °C and thus is known as energy consumed forming. Therefore, in view of an energy saving forming technology, we study magnesium alloy sheet forming by a rotational incremental sheet forming (RISF) at room temperature, where the rotational tool generates local heat of specimen enough to accelerate plastic deformation. The flow curves of the magnesium alloy sheet are obtained and calculated at elevated temperatures, while the yield loci of the magnesium alloy sheet are measured at room temperature. Using RISF, a square cup of 80-mm width, 80-mm length, and 25-mm height is then formed from a magnesium alloy sheet at room temperature. In addition, the strain distribution is obtained and compared with the forming limit curve (FLC) by considering the effect of the tool radius and is found to effectively predict the forming limit of a magnesium alloy sheet in RISF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. M. Sakurada, O. Nagassawa, and M. Oshino: Jpn. Soc. Mech. Eng., 1994, vol. 15, pp. 21–26.
2. E. Schubert, M. Klassen, I. Zerner, C. Walz, and G. Sepld: J. Mater. Proc. Technol., 2001, vol. 115, pp. 2–8.10.1016/S0924-0136(01)00756-7 ↗
3. D. Li and A. Ghosh: Mater. Sci. Eng., 2003, vol. 352A, pp. 279–86.10.1016/S0921-5093(02)00915-2 ↗
4. H.G. Jeong, S. Choi, and K.H. Na: Trans. Mater. Proc., 2005, vol. 14, pp. 661–67.10.5228/KSPP.2005.14.8.661 ↗
5. N.A. El-Mahallawy, M.A. Taha, E. Pokora, and F. Klein: J. Mater. Proc. Technol., 1998, vol. 73, pp. 125–38.10.1016/S0924-0136(97)00221-5 ↗
6. B.H. Hu, K.K. Tong, X.P. Niu, andI. Pinwill: J. Mater. Process. Technol., 2000, vol. 105, pp. 128–33.10.1016/S0924-0136(00)00546-X ↗
7. E. Doege and K. Droder: J. Mater. Proc. Technol., 2001, vol. 115, pp. 14–19.10.1016/S0924-0136(01)00760-9 ↗
8. H. Friedrich and S. Schumann: J. Mater. Proc. Technol., 2001, vol. 117, pp. 276–81.10.1016/S0924-0136(01)00780-4 ↗
9. J.G. Park, Y.S. Kim, T. Kuwabara, and B.S. You: Trans. Mater. Process., 2005, vol. 14, pp. 520–26.10.5228/KSPP.2005.14.6.520 ↗
10. S.W. Won, S.G. Oh, K. Osakada, J.G. Park, and Y.S. Kim: 2004 Proc. Spring. Conf., Korean Society for Technology of Plasticity, Changwon, Korea, 2004, pp. 53–56.
11. S. Yoshihara and H. Nishimura: J. Mater. Proc. Technol., 2003, vol. 142, pp. 609–13.10.1016/S0924-0136(03)00248-6 ↗
12. R. Paisarn, S. Tagawa, and N. Koga: J. Jpn. Inst. Light Met., 2003, vol. 53, pp. 152–56.10.2464/jilm.53.152 ↗
13. N. Koga and R. Paisarn: J. Jpn. Inst. Light Met., 2001, vol. 51, pp. 441–45.10.2464/jilm.51.441 ↗
14. D.K. Choo, S.W. Oh, J.H. Lee, and C.G. Kang: Trans. Mater. Process., 2005, vol. 14, pp. 628–34.10.5228/KSPP.2005.14.7.628 ↗
15. H. Iseki: J. Mater. Proc. Technol., 2001, vol. 111, pp. 150–54.10.1016/S0924-0136(01)00500-3 ↗
16. T.J. Kim and D.Y. Yang: Int. J. Mech. Sci., 2000, vol. 42, pp. 1271–86.10.1016/S0020-7403(99)00047-8 ↗
17. M.S. Shim and J.J. Park: J. Mater. Proc. Technol., 2001, vol. 113, pp. 654–58.10.1016/S0924-0136(01)00679-3 ↗
18. Y.H. Kim and J.J. Park: J. Mater. Proc. Technol., 2002, vols. 130–131, pp. 42–46.10.1016/S0924-0136(02)00788-4 ↗
19. E. Ceretti, C. Giardini, and A. Attanasio: J. Mater. Proc. Technol., 2004, vol. 152, pp. 176–84.10.1016/j.jmatprotec.2004.03.024 ↗
20. G. Hussain, L. Gao, N. Hayat, Z. Cui, Y.C. Pang, and N.U. Dar: J. Mater. Proc. Technol., 2008, vol. 203, pp. 193–201.10.1016/j.jmatprotec.2007.10.043 ↗
21. S.W. Kim, Y.S. Lee, Y.N. Kwon, and J.H. Lee: Trans. Mater. Process., 2008, vol. 17, pp. 373–79.10.5228/KSPP.2008.17.5.373 ↗
22. C. Chu and A. Needleman: J. Eng. Mater. Technol., 1980, vol. 102, pp. 249–56.10.1115/1.3224807 ↗
23. W. Lievers, A. Pilkey, and D. Lloyd: Acta Mater., 2004, vol. 52, pp. 3001–07.10.1016/j.actamat.2004.03.002 ↗
24. J.G. Park, B.S. You, and Y.S. Kim: Trans. Mater. Process., 2008, vol. 17, pp. 412–19.10.5228/KSPP.2008.17.6.412 ↗
25. http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=38369
26. J.J. Park and Y.H. Kim: J. Mater. Proc. Technol., 2003, vol. 140, pp. 447–53.10.1016/S0924-0136(03)00768-4 ↗
27. H. Takuda, T. Morishita, T. Kinoshita, and N. Shirakawa: J. Mater. Proc. Technol., 2005, vols. 164–165, pp. 1258–62.10.1016/j.jmatprotec.2005.02.034 ↗
28. T. Kuwabara, S. Ikeda, and T. Kurosa: J. Mater. Proc. Technol., 1998, vols. 80–81, pp. 517–23.10.1016/S0924-0136(98)00155-1 ↗
29. F. Yoshida, T. Uemori, and K. Fujiwara: Int. J. Plas., 2002, vol. 18, pp. 633–59.10.1016/S0749-6419(01)00049-3 ↗
30. A. Prakash, S.M. Weygand, and H. Riedel: Comp. Mater. Sci., 2009, vol. 45, pp 744–50.10.1016/j.commatsci.2008.06.015 ↗
31. M.G. Lee, S.J. Kim, R.H. Wagoner, K. Chung, and H.Y. Kim: Int. J. Plas., 2008, vol. 25, pp. 70–104.10.1016/j.ijplas.2007.12.003 ↗
32. W.C. Emmens and A.H. Boogaard: J. Mater. Proc. Technol., 2009, vol. 209, pp. 3688–95.10.1016/j.jmatprotec.2008.10.003 ↗
33. T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A, 2008, vol. 490, pp. 411–20.10.1016/j.msea.2008.02.004 ↗
34. T.J. Kim and D.Y. Yang: Int. J. Mech. Sci., 2000, vol. 42, pp. 1271–86.10.1016/S0020-7403(99)00047-8 ↗
35. H.Y. Kim, S.C. Choi, H.S. Lee, H.J. Kim, and K.T. Lee: Trans. Mater. Process., 2007, vol. 16, pp. 364–69.10.5228/KSPP.2007.16.5.364 ↗
36. M.F. Shi and J.C. Gerdeen: J. Mater. Shap. Technol., 1991, vol. 9, pp. 253–68.10.1007/BF02833650 ↗
37. H.S. Son and Y.S. Kim: Int. J. Mech. Sci., 2003, vol. 45, pp. 1625–45.10.1016/j.ijmecsci.2003.10.011 ↗
38. M. Oyane, T. Sato, K. Okimoto, and S. Shima: J. Mech. Work. Technol., 1980, vol. 4, pp. 65–81.10.1016/0378-3804(80)90006-6 ↗