Modeling the Flow Curve Characteristics of 410 Martensitic Stainless Steel Under Hot Working Condition
Source abstract
Abstract
The hot deformation behavior of AISI 410 martensitic stainless steel was investigated by conducting hot compression tests between 1173 K (900 °C) and 1423 K (1150 °C) and between strain rates of 0.001 s−1 to 1 s−1. The hyperbolic sine function described the relation well between flow stress at a given strain and the Zener–Hollomon parameter (Z). The variation of flow stress with deformation temperature gave the average value of apparent activation energy as 448 kJ/mol. The strain and stress corresponding to two important points associated with flow curve (i.e., peak strain and the onset of steady-state flow) were related to the Z parameter using power-law equations. A model also was proposed based on the Johnson–Mehl–Avrami–Kolmogorov (JMAK) equation to estimate the fractional softening of dynamic recrystallization at any given strain. This model can be used readily for the prediction of flow stress. The values of n and k, material constants in the JMAK equation, were determined for the studied material. The strains regarding the peak and the onset of steady-state flow were formulated in term of applied strain rate and the constants of the JMAK equation. A good agreement was found between the predicted strains and those obtained by the experimental work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. S. Venugopal, S.L. Mannan, and P. Rodriguez: J. Mater. Sci., 2004, vol. 39, pp. 5557-60.10.1023/B:JMSC.0000039286.15633.32 ↗
2. A. Dehghan-Manshadi and P.D. Hodgson: J. Mater. Sci., 2008, vol. 43, pp. 6272-77.10.1007/s10853-008-2907-4 ↗
3. M. El Wahabi, L. Gavard, F. Montheillet, J.M. Cabrera, and J.M. Prado: Acta Mater., 2005, vol. 53, pp. 4605-12.10.1016/j.actamat.2005.06.020 ↗
4. A. Momeni, A. Shokuhfar, and S.M. Abbasi: J. Mater. Sci. Tech., 2007, vol. 23, pp. 775-78.
5. A. Dehghan-Manshadi, M.R. Barnett, and P.D. Hodgson: Mater. Sci. Eng. A, 2008, vol. 485, pp. 664-72.10.1016/j.msea.2007.08.026 ↗
6. A. Dehghan-Manshadi, H. Beladi, M.R. Barnett, and P.D. Hodgson: Mater. Sci. Forum, 2004, vols. 467–470, pp. 1163-68.10.4028/www.scientific.net/MSF.467-470.1163 ↗
7. A. Momeni, S.M. Abbasi, and A. Shokuhfar: Can. Metall. Quart., 2007, vol. 4, pp. 189-93.10.1179/cmq.2007.46.2.189 ↗
8. R. Ding and Z.X. Guo: Acta. Mater., 2001, vol. 49, pp. 3163-75.10.1016/S1359-6454(01)00233-6 ↗
9. S.H. Cho and Y.C. Yoo: J. Mater. Sci., 2001, vol. 36, pp. 4267-72.10.1023/A:1017949812425 ↗
10. X. Wang, E. Brunger, and G. Gottstein: Mater. Sci. Eng. A, 2000, vol. 290, pp. 10-185.10.1016/S0921-5093(00)00915-1 ↗
11. S. Mandal, P.V. Sivaprasad, and R.K. Dube: J. Mater. Sci., 2007, vol. 42, pp. 2724-34.10.1007/s10853-006-1275-1 ↗
12. A. Momeni, S.M. Abbasi, and A. Shokuhfar: J. Iron Steel Res. Int., 2007, vol. 14, pp. 66-71.10.1016/S1006-706X(07)60077-6 ↗
13. Y.C. Lin, M.S. Chen, and J. Zhong: Comp. Mater. Sci., 2008, vol. 42, pp. 470-77.10.1016/j.commatsci.2007.08.011 ↗
14. Y.C. Lin, M.S. Chen, and J. Zhang: Mater. Sci. Eng. A, 2009, vol. 499, pp. 88-92.10.1016/j.msea.2007.11.119 ↗
15. M.P. Phaniraj and A.K. Lahiri: J. Mater. Process. Technol., 2003, vol. 141, pp. 219-27.10.1016/S0924-0136(02)01123-8 ↗
16. X. He, Z. Yu, and X. Lai: Mater. Lett., 2008, vol. 62, pp. 4181-83.10.1016/j.matlet.2008.05.071 ↗
17. L. Ping, X. Kemin, L. Yan, and T. Jianrong: J. Mater. Process. Technol., 2004, vol. 148, pp. 235-38.10.1016/j.jmatprotec.2003.07.013 ↗
18. R. Ebrahimi, S.H. Zahiri, and A. Najafizadeh: J. Mater. Process. Technol., 2006, vol. 171, pp. 301-05.10.1016/j.jmatprotec.2005.06.072 ↗
19. J.J. Jonas and T. Sakai: 1982 ASM Mater. Sci. Seminar, St Louis, MO, pp. 185–228.
20. W.F. Hosford and R.M. Caddel: Metal Forming, Mechanics and Metallurgy, Cambridge University Press, New York, NY, 2007, p. 52.10.1017/CBO9780511811111.006 ↗
21. C.M. Sellars and W.J. Mc G. Tegart: Int. Metall. Rev., 1972, vol. 17, pp. 1-10.10.1179/095066072790137765 ↗
22. L. Duprez, B.C. DeCooman, and N. Akdut: Metall. Mater. Trans., 2002, vol. 33A, pp. 1931-38.10.1007/s11661-002-0026-4 ↗
23. 23. G.E. Dieter, H.A. Kuhn, and S.L. Semiatin: Handbook of Workability and Process Design, ASM, Materials Park, OH, 2003, pp. 35-44.
24. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon, The Hague, The Netherlands, 2004, p. 234.