journal article·2000-12Open access

Correlation of microstructure with the wear resistance and fracture toughness of hardfacing alloys reinforced with complex carbides

Seong-Hun Choo, Chang Kyu Kim, Kwangjun Euh, Sunghak Lee, Jae-Young Jung, Sangho Ahn

Abstract

A correlation was made of the microstructure, wear resistance, and fracture toughness of hardfacing alloys reinforced with complex carbides. The hardfacing alloys were deposited twice on a low-carbon steel substrate by a submerged arc welding (SAW) method. In order to investigate the effect of complex carbides, different fractions of complex carbide powders included inside hardfacing electrodes were employed. Microstructural analysis of the hardfaced layer showed that cuboidal carbides, in which a TiC carbide core was encircled by a WC carbide, and rod-type carbides, in which W and Ti were mixed, were homogeneously distributed in the bainitic matrix. In the surface layer hardfaced with FeWTiC powders, more complex carbides were formed, because of the efficient melting and solidification during hardfacing, than in the case of hardfacing with WTiC powders. As the volume fraction of complex carbides, particularly that of cuboidal carbides, increased, the hardness and wear resistance increased. In-situ observation of the fracture process showed that microcracks were initiated at complex carbides and that shear bands were formed between them, leading to ductile fracture. The hardness, wear resistance, and fracture toughness of the hardfacing alloys reinforced with complex carbides were improved in comparison with high-chromium white-iron hardfacing alloys, because of the homogeneous distribution of hard and fine complex carbides in the bainitic matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. K.G. Budinski: Surface Engineering for Wear Resistance, Prentice-Hall, Englewood Cliffs, NJ, 1988, pp. 242–87.
2. Metals Handbook, 9th ed., vol. 6, Welding, Brazing and Soldering, ASM, Metals Park, OH, 1983, pp. 771–803.
3. S.K. Ray, M. Mandal, P.K. Bandopadhyay, and A.K. Sengupta: J. Mater. Sci. Lett., 1988, vol. 7, pp. 775–77.10.1007/BF00722096 ↗
4. J. Dodd: J. Mater. Energy Systems, 1980, vol. 2, pp. 65–76.10.1007/BF02833432 ↗
5. R.F. Arnoldy and G.H. Reynolds: Met. Prog., 1977, vol. 112, pp. 31–35.
6. L.E. Svensson, H.K.D.H. Bhadeshia, B. Gretoft, and B. Ulander: J. Mater. Sci., 1986, vol. 21, pp. 1015–19.10.1007/BF01117388 ↗
7. K. Weman and J. Hedegard: Svetsaren, Welding Rev., 1998, vol. 53, pp. 36–39.
8. R.S. Chandel, H.P. Seow, and F.L. Cheong: J. Mater Sci. Lett., 1998, vol. 17, pp. 1785–86.10.1023/A:1006645202182 ↗
9. M.J. Capaldi and J.V. Wood: J. Mater. Synth. Processing, 1996, vol. 4, pp. 245–53.
10. M.J. Capaldi, A. Saidi, and J.V. Wood: Iron Steel Inst. Jpn. Int., 1997, vol. 37, pp. 188–93.10.2355/isijinternational.37.188 ↗
11. A. Saidi: J. Mater. Processing Technol., 1999, vols. 89–90, pp. 141–44.10.1016/S0924-0136(99)00049-7 ↗
12. Specifications for Carbides Products, London & Scandinavian Metallurgical Co. Ltd., London.
13. W.F. Smith: Structure and Properties of Engineering Alloys, McGraw-Hill, New York, NY, 1993, pp. 152–59.
14. ASTM Standard Practice for Conducting Dry Sand/Rubber Wheel Abrasion Tests, ASTM G65-85, ASTM, Philadelphia, PA, 1985.
15. R.O. Ritchie and R.M. Horn: Metall. Trans. A, 1978, vol. 9A, pp. 331–41.10.1007/BF02646382 ↗
16. Y.-H. Kim, D. Kwon, and S. Lee: Acta Metall. Mater., 1994, vol. 42, pp. 1887–91.10.1016/0956-7151(94)90013-2 ↗
17. S. Lee, T.H. Kim, and D. Kwon: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2213–23.10.1007/BF02652322 ↗
18. ASTM Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, ASTM E399-83, ASTM, Philadelphia, PA, 1983, pp. 447–582.
19. Y.-H. Kim, S. Lee, and N.J. Kim: Metall. Trans. A, 1992, vol. 23A, pp. 2589–96.10.1007/BF02658062 ↗
20. S. Lee, K.-S. Sohn, I. Park, and K. Cho: Met. Mater., 1995, vol. 1, pp. 37–46.10.1007/BF03055323 ↗
21. S. Lee, K.-S. Sohn, C.G. Lee, and B.I. Jung: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 123–34.10.1007/s11661-997-0088-4 ↗
22. A.Y. Fasasi, M. Pons, C. Tassin, A. Galerie, G. Sainfort, and C. Polak: J. Mater. Sci., 1994, vol. 29, pp. 5121–26.10.1007/BF01151106 ↗
23. B.S. Terry and O.S. Chinyamakobvu: Mater. Sci. Technol., 1992, vol. 8, pp. 399–405.10.1179/mst.1992.8.5.399 ↗
24. J.D. Ayers, R.J. Schaefer, and W.P. Robey: JOM, 1981, vol. 33, pp. 19–23.10.1007/BF03339467 ↗
25. T.Z. Kattamis and T. Suganuma: Mater. Sci. Eng., 1990, vol. A128, pp. 241–52.10.1016/0921-5093(90)90232-R ↗
26. S.-H. Choo, S. Lee, and S.-J. Kwon: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3131–41.10.1007/s11661-999-0224-4 ↗
27. Z. Liu and H. Fredriksson: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 407–14.10.1007/BF02648418 ↗
28. Z. Liu and H. Fredriksson: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 471–83.10.1007/s11661-997-0148-9 ↗
29. S. Lee, S.-H. Choo, E.-R. Baek, S. Ahn, and N.J. Kim: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3881–91.10.1007/BF02595637 ↗
30. L.E. Svensson, H.K.D.H. Bhadeshia, B. Gretoft, and B. Ulander: J. Mater. Sci., 1986, vol. 21, pp. 1015–19.10.1007/BF01117388 ↗
31. S. Atamert and H.K.D.H. Bhadeshia: Mater. Sci. Eng., 1990, vol. 130, pp. 101–11.10.1016/0921-5093(90)90085-H ↗
32. W.R. Thorpe and B. Chicco: Metall. Trans. A, 1985, vol. 16A, pp. 1541–49.10.1007/BF02663011 ↗
33. J.O. Andersson: Metall. Trans. A, 1988, vol. 19A, pp. 627–36.10.1007/BF02649276 ↗
34. M. Hillert and C. Qiu: Metall. Trans. A, 1991, vol. 22A, pp. 2187–98.10.1007/BF02664985 ↗
35. G. Laird II and G.L.F. Powell: Metall. Trans. A, 1993, vol. 24A, pp. 981–88.10.1007/BF02656520 ↗