Preparation and Mechanical Properties of Particulate-Reinforced Powder Metallurgy Titanium Matrix Composites
Source abstract
Abstract
This research focuses on the in-situ synthesis of titanium (Ti)-titanium carbide (TiC) composites by powder metallurgy (PM) technology. Newly designed Ti-1.5Fe-2.25Mo-1.2Nd-0.3Al (wt pct) alloy was chosen as the matrix, and the additive was Cr3C2. The microstructure, room/elevated temperature, tensile behavior, and sliding wear behavior of the matrix alloy and the composites are presented and discussed. Microstructural analysis of the composites reveals a uniform dispersion of the TiC reinforcements with near-equiaxed shape in the Ti matrix. Tensile property test results show that the tensile strength increases significantly at both room temperature (RT) and elevated temperature after adding Cr3C2 into matrix alloy. Results of sliding wear resistance examination indicate that the wear properties are improved through the synthesis of TiC reinforcements. High strength of the composites, with Cr3C2 added, is attributed to particle strengthening, grain refining, and solution strengthening of Cr element. Better wear resistance of the composites is attributed to strong interface between particles and Ti matrix and high hardness of the composites. Therefore, Cr3C2 is considered to be a promising additive for processing PM Ti matrix composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. S.J. Covey, B.A. Lerch, N. Jayaraman: Mater. Sci. Eng. A, 1995, vol. 200, pp. 68–7710.1016/0921-5093(95)07007-9 ↗
2. K.T. Chiang, D.H. Loh, P.K. Liaw, E.S. Diaz: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3249–5510.1007/BF02669452 ↗
3. S.Q. Guo, Y. Kagawa: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 702–0510.1007/s11661-998-0152-8 ↗
4. W.J. Lu, D. Zhang, R.J. Wu, H. Mori: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3055–6310.1007/s11661-002-0290-3 ↗
5. Z.Y. Ma, R.S. Mishra, S.C. Tjong: Acta Mater., 2002, vol. 50, pp. 4293–30210.1016/S1359-6454(02)00261-6 ↗
6. S. Gorsse, D.B. Miracle: Acta Mater., 2003, vol. 51, pp. 2427–4210.1016/S1359-6454(02)00510-4 ↗
7. W.J. Lu, D. Zhang, X.N. Zhang, R.J. Wu, T. Sakata, H. Mori: Mater. Sci. Eng. A, 2001, vol. 311, pp. 142–5010.1016/S0921-5093(01)00910-8 ↗
8. S. Ranganath: J. Mater. Sci., 1997, vol. 32, pp. 1–16
9. T. Saito: JOM, 2004, vol. 56, pp. 33–3610.1007/s11837-004-0125-3 ↗
10. Z. Fan, H.J. Niu, A.P. Miodownik, T. Saito, B. Cantor: Key Eng. Mater., 1997, vols. 127–131, pp. 423–30
11. S. Abkowitz, P.F. Weihrauch, S.M. Abkowitz, H.L. Heussi: JOM, 1995, vol. 47, pp. 40–4110.1007/BF03221457 ↗
12. P. Wanjara, S. Yue, R.A.L. Drew, J. Root, R. Donaberger: Key Eng. Mater., 1997, vols. 127–131, pp. 415–2210.4028/www.scientific.net/KEM.127-131.415 ↗
13. S. Abkowitz, S.M. Abkowitz: Ind. Heat, 1993, vol. 60, pp. 32–37
14. B. Yang, E.L. Zhang, Y.X. Jin, Z.J. Zhu, S.Y. Zeng: J. Mater. Sci. Technol., 2001, vol. 17, pp. 103–0410.1016/S0924-0136(01)00739-7 ↗
15. S.S. Sahay, K.S. Ravichandran, R. Atri: J. Mater. Res., 1999, vol. 14, pp. 4214–2310.1557/JMR.1999.0571 ↗
16. T. Saito: U.S. Patent No. 6,117,204, 2000
17. S.C. Tjong, Z.Y. Ma: Mater. Sci. Eng. R, 2000, vol. 29, pp. 49–11310.1016/S0927-796X(00)00024-3 ↗
18. X.N. Zhang, W.J. Lu, D. Zhang, R.J. Wu: Scripta Mater., 1999, vol. 41, pp. 39–4610.1016/S1359-6462(99)00087-1 ↗
19. E.L. Zhang, S.Y. Zeng, B. Wang: J. Mater. Proc. Technol., 2002, vols. 125–126, pp. 103–0910.1016/S0924-0136(02)00329-1 ↗
20. V. Chandrasekaran, R. Taggart, D.H. Polonis: Mater. Charact., 1997, vol. 39, pp. 183–9710.1016/S1044-5803(97)00131-9 ↗
21. R.B. Waterhouse, A. Iwabuchi: Wear, 1985, vol. 106, pp. 303–1310.1016/0043-1648(85)90114-0 ↗
22. F.M. Kutas, M.S. Misra: Friction, Lubrication and Wear Technology, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 778–84
23. J.C. Oh, E. Yun, M.G. Golkovski, S. Lee: Mater. Sci. Eng. A, 2003, vol. A351, pp. 98–10810.1016/S0921-5093(02)00821-3 ↗
24. Y. Liu, L.F. Chen, H.P. Tang, C.T. Liu, B. Liu, B.Y. Huang: Mater. Sci. Eng. A, 2006, vol. 418, pp. 25–3510.1016/j.msea.2005.10.057 ↗
25. Y.J. Liang and Y.C. Che: Handbook of Thermodynamic Data for Inorganic Substances, Northeast University Press, Shenyang, China, 1993, pp. 381–82
26. F.M. Binnewies, F.E. Milke: Thermochemical Data of Elements and Compounds, Wiley-VCH, New York, NY, 200210.1002/9783527618347 ↗
27. Y. Liu, L.F. Chen, W.F. Wei, H.P. Tang, B. Liu, B.Y. Huang: J. Mater. Sci. Technol., 2006, vol. 22, pp. 465–69
28. Z.F. Yang, W.J. Lu, J.N. Qin, D. Zhang: Mater. Sci. Eng. A, 2006, vol. 425, pp. 185–9110.1016/j.msea.2006.03.063 ↗
29. R.M. Aikin Jr.: JOM, 1997, vol. 49, pp. 35–39
30. R.J. McElroy, Z.C. Szkopiak: Int. Met. Rev., 1972, vol. 17, pp. 175–8110.1179/095066072790137684 ↗
31. P.E. Zovas, R.M. German, K.S. Hwang, C.J. Li: J. Met., 1983, vol. 35, pp. 28–33
32. J.L. Murray: Monograph Series on Alloy Phase Diagrams: Phase Diagrams of Binary Titanium Alloys, ASM INTERNATIONAL, Metals Park, OH, 1987
33. H.L. Cox: Br. J. Appl. Phys., 1952, vol. 3, pp. 72–7910.1088/0508-3443/3/3/302 ↗
34. V.C. Nardone, K.M. Prewo: Scripta Metall., 1986, vol. 20, pp. 43–4810.1016/0036-9748(86)90210-3 ↗
35. V.C. Nardone: Scripta Metall., 1987, vol. 21, pp. 1313–1810.1016/0036-9748(87)90105-0 ↗
36. D.E. Alman, J.A. Hawk: Wear, 1999, vols. 225–229, pp. 629–3910.1016/S0043-1648(99)00065-4 ↗
37. M. Watson, C. Byington, D. Edwards, S. Amin: Tribol. Trans., 2005, vol. 48, pp. 208–1710.1080/05698190590927451 ↗
38. J.F. Archard: J. Appl. Phys., 1953, vol. 24, pp. 981–8810.1063/1.1721448 ↗