journal article·2006-02

Residual stresses in a quenched superalloy turbine disc: Measurements and modeling

M. A. Rist, J. A. James, S. Tin, B. A. Roder, M. R. Daymond

Publisher page

Abstract

A series of neutron diffraction measurements have been carried out to determine the elastic residual strains deep within a large, 40-cm-diameter, forged and water-quenched IN718 aeroengine compressor disc. Neutron path lengths of up to 6 cm were necessary to probe the thickest parts of the forging, and three-dimensional strain and stress components have been derived for the first time in such a large superalloy specimen. Measurements have been compared with the results from a coupled thermal-mechanical finite-element model of the quenching process, based upon appropriate temperature-dependent material properties, with some success. The general residual stress state in the disc is one of near-surface compression, balanced by tension within the disc interior. The steepest stress and strain gradients occur in the transition region from compression to tension, about 1 cm below the surface all around the disc. The largest stress component is in the disc tangential direction and reaches a magnitude of 400 to 500 MPa near the disc surface and at its core. This exceeds the effective yield stress because of the presence of significant hydrostatic stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metal and Thin Film Mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. X. Xu, W. Zhang, and P.D. Lee: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1805–15.10.1007/s11661-002-0189-z ↗
2. A. Kermanpur, W. Wang, P.D. Lee, and M. McLean: Mater. Sci. Technol., 2003, vol. 19, pp. 859–65.10.1179/026708303225004260 ↗
3. C.A. Dandre, S.M. Roberts, R.W. Evans, and R.C. Reed: Mater. Sci. Technol., 2000, vol. 16, pp. 14–25.10.1179/026708300773002627 ↗
4. G.S. Shen, S.L. Semiatin, and R. Shivpuri: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1795–1803.10.1007/BF02670767 ↗
5. A. Kermanpur, S. Tin, P.D. Lee, and M. McLean: JOM, 2004, vol. 56, pp. 72–78.10.1007/s11837-004-0040-7 ↗
6. S. Tin, P.D. Lee, A. Kermanpur, M.A. Rist, and M. McLean: Metall. Mater. Trans A, 2005, vol. 36A, pp. 2493–504.10.1007/s11661-005-0123-2 ↗
7. J.A. Dann, M.R. Daymond, L. Edwards, J.A. James, and J.R. Santisteban: Physica B, 2004, vol. 350, pp. e511-e514.10.1016/j.physb.2004.03.139 ↗
8. F. Abbasi and A.J. Fletcher: Mater. Sci. Technol., 1985, vol. 1, pp. 830–37.10.1179/mst.1985.1.10.830 ↗
9. Y. Nagasaka, J.K. Brimacombe, E.B. Hawbolt, I.V. Samarasekera, B. Hernandezmorales, and S.E. Chidiac: Metall. Trans A, 1993, vol. 24A, pp. 795–808.10.1007/BF02656501 ↗
10. D.Y. Ju, R. Mukai, N. Minakawa, Y. Morii, and A. Moriai: Key Eng. Mater., 2004, vols. 270–273, pp. 139–46.10.4028/www.scientific.net/KEM.270-273.139 ↗
11. R.A. Wallis and P.R. Bhowal: Superalloys 1988, TMS, Warrendale, PA, 1988, pp. 525–34.
12. J.M. Franchet, F. Devy, P.E. Mosser, Y. Honnorat, and A. Benallal: Superalloys 1992, TMS, Warrendale, PA, 1992, pp. 73–82.
13. D. Dye, K.T. Conlon, and R.C. Reed: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1703–13.10.1007/s11661-004-0079-7 ↗
14. U. Cihak, P. Staron, W. Marketz, H. Leitner, J. Tockner, and H. Clemens: Z. Metallkd., 2004, vol. 95, pp. 663–67.10.3139/146.018003 ↗
15. M.R. Daymond, M.A.M. Bourke, R.B. Von Dreele, B. Clausen, and T. Lorentzen: J. Appl. Phys., 1997, vol. 82, pp. 1554–62.10.1063/1.365956 ↗
16. M.R. Daymond: J. Appl. Phys., 2004, vol. 96, pp. 4263–72.10.1063/1.1794896 ↗
17. J.A. James, J.R. Santisteban, L. Edwards, and M.R. Daymond: Physica B, 2004, vol. 350, pp. e743-e746.10.1016/j.physb.2004.03.194 ↗
18. DEFORM 2D, Version 8.1, Scientific Forming Technologies Corporation, Columbus, OH, 2004.
19. J. Kolts: in Superalloy 718—Metallurgy and Applications, TMS, Warrendale, PA, 1989, pp. 329–44.10.7449/1989/Superalloys_1989_329_344 ↗
20. Anon: Adv. Mater. Processes, 2000, vol. 158, pp. 89–102.10.1034/j.1600-0447.2000.102002158.x ↗
21. D. Dye, O. Hunziker, S.M. Roberts, and R.C. Reed: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1713–25.10.1007/s11661-001-0149-z ↗
22. “High-Temperature High-Strength Nickel-Base Alloys,” Technical Report No. 393, Nickel Development Institute, 1995, pp. 1–52.
23. K.C. Mills: Recommended Values of Thermophysical Properties for Selected Commercial Alloys, Woodhead Publishing, Cambridge, United Kingdom, 2002, pp. 181–90.10.1533/9781845690144.181 ↗
24. M. Kobayashi, A. Ono, M. Otsuki, H. Sakate, and F. Sakuma: Int. J. Thermophys., 1999, vol. 20, pp. 299–308.10.1023/A:1021467322442 ↗
25. ASM Handbook Volume 4: Heat Treating, ASM INTERNATIONAL, Materials Park, OH, 1991, pp. 803–14.
26. S. Sen, B. Aksakal, and A. Ozel: Int. J. Mech. Sci., 2000, vol. 42, pp. 2013–29.10.1016/S0020-7403(99)00063-6 ↗