journal article·2010-04

Activation Enthalpies of Deformation-Induced Lattice Defects in Severe Plastic Deformation Nanometals Measured by Differential Scanning Calorimetry

Daria Setman, Michael B. Kerber, Erhard Schafler, Michael J. Zehetbauer

Publisher page

Abstract

Samples of 99.99 pct pure copper and nickel of 99.998 pct purity were deformed by high-pressure torsion (HPT) at different hydrostatic pressures, to different shear strains. Activation enthalpies (Q) were determined by differential scanning calorimetry (DSC) using Kissinger’s method. For the one annealing peak found in HPT Cu, Q amounts to Q = 0.78 to 0.48 eV depending on the shear strain applied. In the case of Ni, the activation enthalpies of the two annealing peaks were determined as Q = 0.65 eV and Q = 0.95 eV, respectively, with no obvious dependence on shear strain, although this has been indicated by the annealing peak temperatures. Applying defect specific analyses of the annealing peaks, it turned out that the larger Q value represents the annihilation of dislocations and agglomerates, while the smaller one reflects the annihilation of single or double vacancies. Concerning the strain dependence of the larger Q, two possible explanations have been discussed: (1) the annihilation of dislocations assisted by the strain-dependent density of vacancy agglomerates and (2) the annihilation of dislocations enhanced by a strain-dependent level of long-range internal stresses. Because of closer correlations of Q with external and internal stresses at very high shear strains, explanation (2) has been favored.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Y. Estrin, L. Toth, Y. Brechet, and H. Kim: Mater. Sci. Forum, 2006, vols. 503–504, pp. 675–80.10.4028/www.scientific.net/MSF.503-504.675 ↗
2. T. Hebesberger, H. Stüwe, A. Vorhauer, F. Wetscher, and R. Pippan: Acta Mater., 2005, vol. 53, pp. 393–402.10.1016/j.actamat.2004.09.043 ↗
3. R. Lapovok, P.F. Thomson, R. Cottam, and Y. Estrin: J. Mater. Sci., 2005, vol. 40, pp. 1699–1708.10.1007/s10853-005-0672-1 ↗
4. E. Schafler, G. Steiner, E. Korznikova, M. Kerber, and M. Zehetbauer: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 169–73.10.1016/j.msea.2005.08.070 ↗
5. R. Valiev, R. Islamgaliev, and I. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
6. Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–15.10.1038/nature01133 ↗
7. Y. Zhu, X. Liao, S. Srinivasan, and E. Lavernia: J. Appl. Phys., 2005, vol. 98, art. no. 034319, pp. 1–8.10.1063/1.2006974 ↗
8. H. Kissinger: Analyt. Chem., 1957, vol. 29, pp. 1702–06.10.1021/ac60131a045 ↗
9. D. Setman, E. Schafler, E. Korznikova, and M. Zehetbauer: Mater. Sci. Eng. A, 2008, vol. 493, pp. 116–22.10.1016/j.msea.2007.06.093 ↗
10. E. Korznikova, E. Schafler, G. Steiner, and M. Zehetbauer: Proc. 4th Int. Symp. on Ultrafine Grained Materials, 2006 TMS Annual Meeting, TMS, Warrendale, PA, 2006, pp. 97–102.
11. A. Zhilyaev, G. Nurislamova, S. Surinach, M. Baro, and T. Langdon: Mater. Phys. Mech., 2002, vol. 5, pp. 23–30.
12. X. Molodova, G. Gottstein, M. Winning, and R. Hellmig: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 204–13.10.1016/j.msea.2007.01.042 ↗
13. A. Vorhauer and R. Pippan: Scripta Mater., 2004, vol. 51, pp. 921–25.10.1016/j.scriptamat.2004.04.025 ↗
14. G. Ribárik, T. Ungár, and J. Gubicza: J. Appl. Cryst., 2001, vol. 34, pp. 669–76.10.1107/S0021889801011451 ↗
15. H. Mughrabi, T. Ungar, W. Kienle, and M. Wilkens: Phil. Mag A, 1986, vol. 53, pp. 793–813.10.1080/01418618608245293 ↗
16. A. Dubravina, M. Zehetbauer, E. Schafler, and I. Alexandrov: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 817–21.10.1016/j.msea.2004.03.093 ↗
17. T. Ungár, J. Gubicza, G. Ribárik, and A. Borbely: J. Appl. Cryst., 2001, vol. 34, pp. 298–310.10.1107/S0021889801003715 ↗
18. F. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon Press, New York, NY, 2004.
19. H. Wollenberger: in Physical Metallurgy, R. Cahn and P. Haasen, eds., Elsevier, Amsterdam, 1983, pp. 1189–1221.
20. W. Cao, C. Gu, E. Pereloma, and C. Davies: Mater. Sci. Eng. A, 2008, vol. 492, pp. 74–79.10.1016/j.msea.2008.02.048 ↗
21. U. Meyer: Ph.D. Thesis, Technische Universität Braunschweig, Germany, 1989.
22. K. Schönborn and F. Haessner: Thermochimica Acta, 1985, vol. 86, pp. 305–20.10.1016/0040-6031(85)87059-3 ↗
23. J. Ribbe, G. Schmitz, Y. Amouyal, Y. Estrin, and S. Divinski: Mater. Sci. Forum, 2008, vols. 584–586, pp. 380–86.10.4028/www.scientific.net/MSF.584-586.380 ↗
24. Y. Amouyal, S. Divinski, L. Klinger, and E. Rabkin: Acta Mater., 2008, vol. 56, pp. 5500–13.10.1016/j.actamat.2008.07.029 ↗
25. S. Divinski, J. Ribbe, G. Reglitz, Y. Estrin, and G. Wilde: unpublished research, 2009.
26. R. Canon and J. Stark: J. Appl. Phys., 1969, vol. 40, pp. 4366–73.10.1063/1.1657200 ↗
27. K. Sassa, W. Petry, and G. Vogl: Philos. Mag. A, 1983, vol. 48, pp. 41–61.10.1080/01418618308234886 ↗
28. M. Zehetbauer, G. Steiner, E. Schafler, A. Korznikov, and E. Korznikova: Mater. Sci. Forum, 2006, vols. 503–504, pp. 57–64.10.4028/www.scientific.net/MSF.503-504.57 ↗
29. E. Schafler, A. Dubravina, B. Mingler, H. Karnthaler, and M. Zehetbauer: Mater. Sci. Forum, 2006, vols. 503–504, pp. 51–56.10.4028/www.scientific.net/MSF.503-504.51 ↗
30. M. Zehetbauer and D. Trattner: Mater. Sci. Eng., 1987, vol. 89, pp. 93–101.10.1016/0025-5416(87)90253-9 ↗