journal article·2002-09

The incorporation of self-propagating, high-temperature synthesis-formed Fe-TiB2 into ferrous melts

C. C. Degnan, P. H. Shipway

Publisher page

Abstract

Steel-matrix particulate composites were processed by direct addition of an Fe-TiB2 master alloy powder to a BS970:080M30 medium-carbon steel. This powder was produced using a self-propagating, high-temperature synthesis (SHS) reaction and consisted of a dispersion of fine TiB2 particles (2 to 5 µm), respectively, in an iron binder. The addition of the Fe-TiB2 powder resulted in the formation a parasitic Fe2B phase and TiC within the steel microstructure. In response to this, an SHS master alloy composed of Fe-(50 pct TiB2+50 pct Ti) was manufactured, which, when added to the steel, prevented the formation of Fe2B and resulted in a composite containing a mixture of TiB2 and TiC particles. The effect of master alloy composition and addition level on the microstructural phases generated is discussed in detail. The response to heat treatment of composite materials manufactured in this way was also investigated. It was found that an isothermal hold at 840 °C leads to a substantial softening of the material processed using the Fe-TiB2 additive, while at 1000 °C, a hardness level equivalent to that of the as-cast material was maintained. The same heat treatment of samples in which the formation of Fe2B was suppressed resulted in no appreciable difference in hardness level or microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. T.Z. Kattamis and T. Suganuma: Mater. Sci. Eng. A, 1990, vol. 128A, pp. 241–52.10.1016/0921-5093(90)90232-R ↗
2. S. Skolianos, T.Z. Kattamis, M. Chen, and B.V. Chambers: Mater. Sci. Eng. A, 1994, vol. 183A, pp. 195–204.10.1016/0921-5093(94)90903-2 ↗
3. C.C. Degnan, P.H. Shipway, and J.V. Wood: Wear, 2001, vol. 251, pp. 1444–451.10.1016/S0043-1648(01)00772-4 ↗
4. C. Cliche and S. Dallaire: Mater. Sci. Eng. A, 1991, vol. 148A, pp. 319–28.10.1016/0921-5093(91)90834-A ↗
5. R.K. Galgali, H.S. Ray, and A.K. Chakrabarti: Mater. Sci. Technol., 1998, vol. 14, pp. 810–15.10.1179/mst.1998.14.8.810 ↗
6. B.S. Terry and O.S. Chinyamakobvu: J. Mater. Sci. Lett., 1991, vol. 10, pp. 628–29.10.1007/BF00723359 ↗
7. B.S. Terry and O.S. Chinyamakobvu: Mater. Sci. Technol., 1991, vol. 7, pp. 842–48.10.1179/mst.1991.7.9.842 ↗
8. R.K. Galgali, H.S. Ray, and A.K. Chakrabarti: Mater. Sci. Technol., 1999, vol. 15, pp. 437–41.10.1179/026708399101505905 ↗
9. C.C. Degnan, J.L.F. Kellie, and J.V. Wood: in Processing, Properties and Applications of Cast MMC’s, TMS Fall Meeting, Cincinnati, OH, 1996, TMS, Warrendale, PA, 1996, pp. 317–25.
10. G.V. Samsonov: Handbook of High-Temperature Materials, No. 2: Properties Index, Plenum Press, New York, NY, 1964, pp. 179–80.
11. R. Telle and G. Petzow: Mater. Sci. Eng. A, 1988, vols. 105A/106A, pp. 97–104.10.1016/0025-5416(88)90485-5 ↗
12. L.S. Sigl and K.A. Schwetz: Powder Metall. Int., 1991, vol. 23, pp. 221–23.
13. Th. Jüngling, L.S. Sigl, R. Oberacker, F. Thümmler, and K.A. Schwetz: Int. J. Refractory Met. Hard Mater., 1994, vol. 12, pp. 71–88.10.1016/0263-4368(93)90018-B ↗
14. K. Tanaka and T. Saito: J. Phase Equilibrium, 1999, vol. 20(3), pp. 207–14.10.1361/105497199770335730 ↗
15. A.D. Panasyuk and A.P. Umansky: J. Less-Common Met., 1986, vol. 117, pp. 335–39.10.1016/0022-5088(86)90057-3 ↗
16. E. Tofaute and R. Büttinghaus: Arch. Eisenhuttenwes., 1938, vol. 12(33), pp. 1–6.