journal article·2014-03Open access

Comparison of the Effect of Individual and Combined Zr and Mn Additions on the Fracture Behavior of Al-Cu-Li Alloy AA2198 Rolled Sheet

Dimitrios Tsivoulas, Philip B. Prangnell

Abstract

Abstract The effect of individual and combined addition of dispersoid-forming alloying elements Zr and Mn on the fracture behavior of the Al-Cu-Li alloy 2198 has been investigated by the Kahn tear test. Overall, the standard baseline 2198 alloy containing only Zr exhibited the best performance, while the alloy with the combined presence of Zr and Mn was slightly inferior. The lowest properties were seen for a Zr-free 2198-0.4Mn alloy variant. In the T351 temper fracture initiated at coarse constituent particles that formed large cavities and microvoid sheets linked the initial sites of void growth. In the Mn-containing alloys microvoids clearly nucleated at the coarser Al20Cu2Mn3 dispersoids within the microstructure, while this was not identifiable for the finer coherent Al3Zr dispersoids. However, this difference in the mechanism of cavity linkage had little effect on the overall toughness of the materials, which was more closely related to the effect of Mn and Zr on the level of recrystallization. Extended artificial aging promoted grain boundary decohesion due to the precipitation of high densities of T1 particles on GBs and favored a cleavage fracture mode. Particle decohesive fracture was also promoted by T1 precipitation on the Mn dispersoids.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. T.H. Sanders Jr. and E.A. Starke Jr.: Proceedings of the Fifth International Conference on Al-Li alloys, Birmingham, UK, 1989.
2. J.R. Davis: in ASM Specialty Handbook: Aluminium and Aluminium Alloys, ASM International: Materials Park, OH, 1993.
3. R.J. Rioja: Mater. Sci. Eng. A, 1998, vol. 257, pp. 100–07.10.1016/S0921-5093(98)00827-2 ↗
4. J.W. Martin: Annu. Rev. Mater. Sci., 1988, vol. 18, pp. 101–19.10.1146/annurev.ms.18.080188.000533 ↗
5. A. Cho, Z. Long, B. Lisagor, T. Bales, M. Domack, and J. Wagner: Mater. Sci. Forum, 2006, vols. 519–521, pp. 1585–90.10.4028/www.scientific.net/MSF.519-521.1585 ↗
6. P.S. Chen and W.P. Stanton: NASA Technical Memorandum, Report No., 211547, 2002.
7. A.K. Vasudévan and R.D. Doherty: Acta Metall., 1987, vol. 35, pp. 1193–219.10.1016/0001-6160(87)90001-0 ↗
8. E.J. Lavernia, T.S. Srivatsan, and F.A. Mohamed: J. Mater. Sci., 1990, vol. 25, pp. 1137–58.10.1007/BF00585420 ↗
9. B. Decreus, F. Bley, A. Deschamps, and P. Donnadieu: ICAA-11: 11th International Conference on Aluminium Alloys, Aachen, Germany, 2008.
10. E.A. Starke Jr., K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan, and P. Veyssière: in Encyclopedia of Materials: Science and Technology, Elsevier, Oxford, 2001, pp. 101–06.
11. K.S. Kumar, S.A. Brown, and J.R. Pickens: Acta Mater., 1996, vol. 44, pp. 1899–1915.10.1016/1359-6454(95)00319-3 ↗
12. S.P. Lynch, A.R. Wilson, and R.T. Byrnes: Mater. Sci. Eng. A, 1993, vol. 172, pp. 79–93.10.1016/0921-5093(93)90428-H ↗
13. K.V. Jata and A.K. Vasudévan: Mater. Sci. Eng. A, 1998, vol. 241, pp. 104–13.10.1016/S0921-5093(97)00479-6 ↗
14. J.J. Lewandowski and N.J.H. Holroyd: Mater. Sci. Eng. A, 1990, vol. 123, pp. 219–27.10.1016/0921-5093(90)90287-D ↗
15. J.A. Blind and J.W. Martin: Mater. Sci. Eng., 1983, vol. 57, pp. 49–54.10.1016/0025-5416(83)90026-5 ↗
16. H.X. Li and C.Q. Chen: Mater. Sci. Technol., 1990, vol. 6, pp. 850–6.10.1179/mst.1990.6.9.850 ↗
17. N.U. Deshpande, A.M. Gokhale, D.K. Denzer, and J. Liu: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1191–1201.10.1007/s11661-998-0246-3 ↗
18. A.M. Gokhale, N.U. Deshpande, D.K. Denzer, and J. Liu: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1203–10.10.1007/s11661-998-0247-2 ↗
19. C.Q. Chen and J.F. Knott: Met. Sci., 1981, vol. 15, pp. 357–64.10.1179/030634581790426930 ↗
20. E.A. Starke Jr. and F.S. Lin: Metall. Trans. A, 1982, vol. 13A, pp. 2259–69.10.1007/BF02648396 ↗
21. P. Lequeu, K. Smith, and A. Daniélou: J. Mater. Eng. Perform., 2010, vol. 19, pp. 841–47.10.1007/s11665-009-9554-z ↗
22. D. Tsivoulas, J.D. Robson, C. Sigli, and P.B. Prangnell: Acta Mater., 2012, vol. 60, pp. 5245–59.10.1016/j.actamat.2012.06.012 ↗
23. D. Tsivoulas, P.B. Prangnell, C. Sigli, and B. Bès: Adv. Mater. Res., 2010, vol. 89–91, pp. 568–73.10.4028/www.scientific.net/AMR.89-91.568 ↗
24. K.S. Vecchio and D.B. Williams: Acta Metall., 1987, vol. 35, pp. 2959–70.10.1016/0001-6160(87)90295-1 ↗
25. E. Anselmino, A. Miroux, and S. van der Zwaag: Aluminium, 2004, vol. 80, pp. 680–85.
26. M. Dehmas, P. Archambault, M. Serriere, E. Gautier, and C.-A. Gandin: Aluminium, 2004, vol. 80, pp. 619–23.
27. R.E. Sanders Jr. and E.A. Starke Jr.: Mater. Sci. Eng., 1977, vol. 28, pp. 53–68.10.1016/0025-5416(77)90089-1 ↗
28. D.S. Chung, C.W. Jea, J.H. Yoon, and J.K. Kim: Mater. Sci. Forum, 2007, vol. 539–543, pp. 481–86.10.4028/www.scientific.net/MSF.539-543.481 ↗
29. S. Nam and D. Lee: Met. Mater. Int., 2000, vol. 6, pp. 13–16.10.1007/BF03026339 ↗
30. T.S. Srivatsan, D. Lanning Jr., and K.K. Soni: J. Mater. Sci., 1993, vol. 28, pp. 3205–13.10.1007/BF00354237 ↗
31. M. Nakai and T. Eto: Mater. Sci. Eng. A, 2000, vol. 285, pp. 62–68.10.1016/S0921-5093(00)00667-5 ↗
32. J.A. Walsh, K.V. Jata, and E.A. Starke Jr.: Acta Metall., 1989, vol. 37, pp. 2861–71.10.1016/S0001-6160(89)80001-X ↗
33. J.G. Kaufman and A.H. Knoll: Mater. Res. Standards, 1964, vol. 4, pp. 151–55.
34. ASTM B 871-01: Standard Test Method for Tear Testing of Aluminium Alloy Products.
35. E.A. Starke Jr. and J.T. Staley: Prog. Aerospace Sci., 1996, vol. 32, pp. 131–72.10.1016/0376-0421(95)00004-6 ↗
36. D. Tsivoulas: PhD Thesis, The University of Manchester, 2010.
37. J.-T. Beauchesne, D. Caillard, F. Mompiou, P. Ochin, M. Quiquandon, and D. Gratias: Z. Kristallogr., 2008, vol. 223, pp. 823–26.10.1524/zkri.2008.1090 ↗
38. J. Idrac, G. Mankowski, G. Thompson, P. Skeldon, Y. Kihn, and C. Blanc: Electrochim. Acta, 2007, vol. 52, pp. 7626–33.10.1016/j.electacta.2007.05.056 ↗
39. Z. Jia, G. Hu, B. Forbord, and J.K. Solberg: Mater. Sci. Eng. A, 2007, vol. 444, pp. 284–90.10.1016/j.msea.2006.08.097 ↗
40. L. Eschbach, P.J. Uggowitzer, and M.O. Speidel: Mater. Sci. Eng. A, 1998, vol. 248, pp. 1–8.10.1016/S0921-5093(98)00523-1 ↗
41. A.M. Gokhale, N.U. Deshpande, and D.K. Denzer: ICAA-4: 4th International Conference on Aluminium Alloys, Atlanta, USA, 1994.
42. A. Deschamps, B. Decreus, F. De Geuser, T. Dorin, and M. Weyland: Acta Mater., 2013, vol. 61, pp. 4010–21.10.1016/j.actamat.2013.03.015 ↗
43. T. Dorin, A. Deschamps, F. de Geuser, and M. Weyland: ICAA13: 13th International Conference on Aluminium Alloys, Pittsburgh, USA, 2012.
44. B. Decreus, A. Deschamps, P. Donnadieu, and J.C. Ehrström: Mater. Sci. Eng. A, 2013, in press.
45. D. Dumont, A. Deschamps, and Y. Brechet: Mater. Sci. Eng. A, 2003, vol. 356, pp. 326–36.10.1016/S0921-5093(03)00145-X ↗
46. C.P. Blankenship and E.A. Starke: Acta Metall. Mater., 1994, vol. 42, pp. 845–55.10.1016/0956-7151(94)90279-8 ↗
47. D. Dumont, A. Deschamps, and Y. Brechet: Acta Mater., 2004, vol. 52, pp. 2529–40.10.1016/j.actamat.2004.01.044 ↗
48. B. Bachir Bouiadjra, M. Elmeguenni, M. Benguediab, M. Belhouari, and M. Nait-Abdelaziz: Mater. Des., 2009, vol. 30, pp. 752–57.10.1016/j.matdes.2008.05.021 ↗
49. K.C. Kim and S.W. Nam: Mater. Sci. Eng. A, 1998, vol. 244, pp. 257–62.10.1016/S0921-5093(97)00548-0 ↗
50. W.T. Tack, F.H. Heubaum, and J.R. Pickens: Scripta Metall. Mater., 1990, vol. 24, pp. 1685–90.10.1016/0956-716X(90)90528-O ↗
51. C.P. Blankenship and E.A. Starke: Scripta Metall. Mater., 1992, vol. 26, pp. 1719–22.10.1016/0956-716X(92)90540-U ↗
52. B.P. Huang and Z.Q. Zheng: Scripta Mater., 1998, vol. 38, pp. 357–62.10.1016/S1359-6462(97)00503-4 ↗
53. P.S. Chen and B.N. Bhat: NASA Technical Memorandum, Report No., 211548, 2002.
54. M. Kanno and B.-L. Ou: JIM Mater. Trans., 1991, vol. 32, pp. 445–50.10.2320/matertrans1989.32.445 ↗