journal article·2009-07

Relationship between Defect Size and Fatigue Life Distributions in Al-7 Pct Si-Mg Alloy Castings

Murat Tiryakioğlu

Publisher page

Abstract

A new method for predicting the variability in fatigue life of castings was developed by combining the size distribution for the fatigue-initiating defects and a fatigue life model based on the Paris–Erdogan law for crack propagation. Two datasets for the fatigue-initiating defects in Al-7 pct Si-Mg alloy castings, reported previously in the literature, were used to demonstrate that (1) the size of fatigue-initiating defects follow the Gumbel distribution; (2) the crack propagation model developed previously provides respectable fits to experimental data; and (3) the method developed in the present study expresses the variability in both datasets, almost as well as the lognormal distribution and better than the Weibull distribution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Fatigue and fracture mechanics · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. J.T. Staley, Jr., M. Tiryakioğlu, and J. Campbell: Mater. Sci. Eng. A, 2007, vol. A465, pp. 136–45.10.1016/j.msea.2007.02.009 ↗
2. C. Nyahumwa, N.R. Green, and J. Campbell: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 349–58.10.1007/s11661-001-0266-8 ↗
3. G.R. Wakefield and R.M. Sharp: Mater. Sci. Technol., 1996, vol. 12, pp. 518–22.10.1179/mst.1996.12.6.518 ↗
4. D. Casellas, R. Pérez, and J.M. Prado: Mater. Sci. Eng. A, 2005, vol. A398, pp. 171–79.10.1016/j.msea.2005.03.034 ↗
5. Q.G. Wang, D. Apelian, and D.A. Lados: J. Light Met., 2001, vol. 1, pp. 73–84.10.1016/S1471-5317(00)00008-0 ↗
6. A.De.S. Jayatilaka and K. Trustrum: J. Mater. Sci., 1977, vol. 12, pp. 1426–30.10.1007/BF00540858 ↗
7. J.D. Poloniecki and T.R. Wilshaw: Nat. Phys. Sci., 1971, vol. 229, pp. 226–27.10.1038/physci229226a0 ↗
8. J.Z. Yi, P.D. Lee, T.C. Lindley, and T. Fukui: Mater. Sci. Eng. A, 2006, vol. A432, pp. 59–68.
9. J.Z. Yi, Y.X. Gao, P.D. Lee, H.M. Flower, and T.C. Lindley: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1879–90.10.1007/s11661-003-0153-6 ↗
10. M. Tiryakioğlu: Mater. Sci. Eng. A, 2007, vol. A465, pp. 287–89.10.1016/j.msea.2007.02.008 ↗
11. C. Nyahumwa, N.R. Green, and J. Campbell: J. Mech. Behav. Mater., 1998, vol. 9, pp. 227–35.10.1515/JMBM.1998.9.4.227 ↗
12. M. Tiryakioğlu: Mater. Sci. Eng. A, 2008, vol. A497, pp. 119–25.10.1016/j.msea.2008.06.023 ↗
13. P.J. Laz and B.M. Hillberry: Int. J. Fatigue, 1998, vol. 20, pp. 263–70.10.1016/S0142-1123(97)00136-9 ↗
14. K.M. Gruenberg, B.A. Craig, and B.M. Hillberry: AIAA J., 1999, vol. 37, pp. 1304–10.10.2514/2.601 ↗
15. J.E. Zamber and B.M. Hillberry: AIAA J., 1999, vol. 37, pp. 1311–17.10.2514/2.602 ↗
16. M.A. Przystupa, R.J. Bucci, P.E. Magnusen, and A.J. Hinkle: Int. J. Fatigue, 1997, vol. 19, pp. S285–S288.10.1016/S0142-1123(97)00026-1 ↗
17. H. Mayer, M. Papakyriacou, B. Zettl, and S.E. Stanzl-Tschegg: Int. J. Fatigue, 2003, vol. 25, pp. 245–56.10.1016/S0142-1123(02)00054-3 ↗
18. H. Mayer, M. Papakyriacou, B. Zettl, and S. Vacic: Int. J. Fatigue, 2005, vol. 27, pp. 1076–88.10.1016/j.ijfatigue.2005.02.002 ↗
19. P. White, L. Molent, and S. Barter: Int. J. Fatigue, 2005, vol. 27, pp. 752–67.10.1016/j.ijfatigue.2005.01.006 ↗
20. Y. Murakami and M. Endo: Int. J. Fatigue, 1994, vol. 16, pp. 163–82.10.1016/0142-1123(94)90001-9 ↗
21. B. Epstein: Technometrics, 1960, vol. 2, pp. 27–41.10.2307/1266529 ↗
22. E.J. Gumbel: Statistics of Extremes, Columbia University Press, New York, NY, 1958, pp. 156–98.10.7312/gumb92958-007 ↗
23. B.V. Gnedenko: Ann. Math., 1943, vol. 44, pp. 423–53.10.2307/1968974 ↗
24. M. Tiryakioğlu: Mater. Sci. Eng., 2008, vol. A476, pp. 174–77.10.1016/j.msea.2007.04.088 ↗
25. Y. Murakami, T. Toriyama, and E.M. Coudert: J. Test. Eval., 1994, vol. 22, pp. 318–26.10.1520/JTE11840J ↗
26. S. Beretta and Y. Murakami: Fatigue Fract. Eng. Mater. Struct., 1998, vol. 21, pp. 1049–65.10.1046/j.1460-2695.1998.00104.x ↗
27. Y. Murakami and S. Beretta: Extremes, 1999, vol. 2, pp. 123–47.10.1023/A:1009976418553 ↗
28. P. Juvonen: Ph.D. Dissertation, Helsinki University of Technology, Helsinki, 2004.
29. P. Paris and F. Erdoğan: Trans. ASME: J. Basic Eng., 1963, vol. 85, pp. 528–34.10.1115/1.3656900 ↗
30. M.J. Couper, A.E. Neeson, and J.R. Griffiths: Fatigue Fract. Eng. Mater. Struct., 1990, vol. 13, pp. 213–27.10.1111/j.1460-2695.1990.tb00594.x ↗
31. B. Skallerud, T. Iveland, and G. Härkegård: Eng. Fract. Mech., 1993, vol. 44, 857–74.10.1016/0013-7944(93)90108-5 ↗
32. S.A. Barter, L. Molent, N. Goldsmith, and R. Jones: J. Eng. Failure Anal., 2005, vol. 12, pp. 99–128.10.1016/j.engfailanal.2004.04.002 ↗
33. B.R. Crawford, C. Loader, A.R. Ward, C. Urbani, M.R. Bache, S.H. Spence, D.G. Hay, W.J. Evans, G. Clark, and A.J. Stonham: Fatigue Fract. Eng. Mater. Struct., 2005, vol. 28, pp. 795–808.10.1111/j.1460-2695.2005.00912.x ↗
34. C.J. Davidson, J.R. Griffiths, and A.S. Machin: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 223–30.10.1046/j.8756-758x.2001.00490.x ↗
35. Q.G. Wang, C.J. Davidson, J.R. Griffiths, and P.N. Crepeau: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 887–95.10.1007/BF02735010 ↗
36. Y. Murakami and M. Endo: Int. J. Fatigue, 1994, vol. 16, pp. 163–82.10.1016/0142-1123(94)90001-9 ↗
37. Y. Murakami: JSME Int. J., 1989, vol. 32, pp. 167–80.
38. Q.G. Wang, P. Jones, and M. Osborne: in Advances in Aluminum Casting Technology II, M. Tiryakioğlu and J. Campbell, eds., ASM INTERNATIONAL, Materials Park, OH, 2002, pp. 75–84.
39. S.S. Shapiro and C.W. Brain: in Statistical Distributions in Scientific Work, C. Taillie, G.P. Patil, and B.A. Baldessari, eds., D. Reidel Publishing, Boston, 1981, vol. 5, pp. 1–24.
40. M.A. Stephens: in Goodness of Fit Techniques, R.B. D’Agostino and M.A. Stephens, eds., Marcel Dekker, New York, NY, 1986, pp. 97–193.
41. T.W. Anderson and D.A. Darling: J. Am. Stat. Assoc., 1954, vol. 49, pp. 765–69.10.2307/2281537 ↗
42. M.A. Stephens: J. Am. Stat. Assoc., 1974, vol. 69, pp. 730–37.10.2307/2286009 ↗
43. F.J O’Reilly and M.A. Stephens: J. R. Stat. Soc. Ser. B., 1982, vol. 44, pp. 353–60.10.1111/j.2517-6161.1982.tb01213.x ↗
44. Y.X. Gao, J.Z. Yi, P.D. Lee, and T.C. Lindley: Fatigue Fract. Eng. Mater. Struct., 2004, vol. 27, pp. 559–70.10.1111/j.1460-2695.2004.00780.x ↗
45. J.Z. Yi: Ph.D. Dissertation, Imperial College, University of London, London, 2004.
46. M.W. Ozelton, S.J. Mocarski, and P.G. Porter: Durability and Damage Tolerance of Aluminum Castings, WL-TR-91-4111, Wright-Patterson Air Force Base, OH, 1991, pp. 430–33.
47. J. Campbell: Shape Casting: 3rd Int. Symp., J. Campbell, P.N. Crepeau, and M. Tiryakioğlu, eds., TMS, Warrendale, PA, 2009, pp. 3–10.
48. B. Zhang, D.R. Poirier, and W. Chen: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2659–66.10.1007/s11661-999-0306-3 ↗
49. C.A. Johnson: J. Fract. Mech. Ceram., 1983, vol. 5, pp. 365–86.10.1007/978-1-4613-3488-0_23 ↗
50. Q.G. Wang and P.E. Jones: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 615–21.10.1007/s11663-007-9051-4 ↗