Cryogenic S–N Fatigue and Fatigue Crack Propagation Behaviors of High Manganese Austenitic Steels
Source abstract
Abstract
In the current study, the S–N fatigue and the fatigue crack propagation (FCP) behaviors of high manganese austenitic steels, including Fe24Mn and Fe22Mn, were studied, and the results were compared with STS304 (Fe-1Si-2Mn-20Cr-10Ni). The S–N fatigue tests were conducted at 298 K and 110 K (25 °C and −163 °C), respectively, and at an R ratio of 0.1 under a uniaxial loading condition. The FCP tests were conducted at 298 K and 110 K (25 °C and −163°C), respectively, and at R ratios of 0.1 and 0.5, respectively, using compact tension specimens. The resistance to S–N fatigue of each specimen increased greatly with decreasing temperature from 298 K to 110 K (25 °C to −163 °C) and showed a strong dependency on the flow stress. The FCP behaviors of the austenitic steels currently studied substantially varied depending on testing temperature, applied ΔK (stress intensity factor range), and R ratio. The enhanced FCP resistance was observed for the Fe24Mn and the Fe22Mn specimens particularly in the near-threshold ΔK regime, while the enhancement was significant over the entire ΔK regimes for the STS304 specimen, with decreasing temperature from 298 K to 110 K (25 °C to −163 °C). The S–N fatigue and the FCP behaviors of high manganese austenitic steels are compared with STS304 and discussed based on the fractographic and the micrographic observations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Fatigue at Low Temperatures, ASTM STP 857, R.I. Stephens, ed., American Society for Testing and Materials, Philadelphia, 1985.
2. P.K. Liaw and W.A. Logsdon: Eng. Fract. Mech., 1985, vol. 22, pp. 585-94.10.1016/0013-7944(85)90122-5 ↗
3. L.W. Tsay, Y.C. Chen and S.L.I. Chan: Int. J. Fatigue, 2001, vol. 23, pp. 103-13.10.1016/S0142-1123(00)00081-5 ↗
4. M.R. Krishnadev and R. Ghosh: Metall. Trans. A, 1979, vol. 10A, pp. 1941-4.10.1007/BF02811740 ↗
5. C.T. Liu and M.L. Duan: Eng. Fract. Mech., 1996, vol. 53, pp. 231-37.10.1016/0013-7944(95)00066-6 ↗
6. J.H. Baek, C.M. Kim, W.S. Kim and Y.T. Kho: J. Kor. Inst. Met. & Mater., 2001, vol. 7, pp. 579-85.10.1007/BF03179257 ↗
7. Z. Mei and J.W. Morris, Jr.: Metall. Trans. A, 1990, vol. 21A, pp. 3137-52.10.1007/BF02647310 ↗
8. R.L. Tobler and R.P. Reed: J. Test. Eval., 1984, vol. 12, No.6, pp. 364-70.10.1520/JTE10741J ↗
9. J.K. Kwon, H.Y. Lee, Y.J. Kim and S.S. Kim: J. Kor. Inst. Met. & Mater., 2011, vol. 49, pp. 774-9.
10. J.W. Morris, Jr., J.W. Chan, and Z. Mei: Fourteenth International Cryogenic Engineering Conference and International Cryogenic Materials Conference, 1992, pp. 1–13.
11. D.Y. Ryoo, S.C. Lee, Y.D. Lee and J.Y. Kang: J. Kor. Inst. Met. & Mater., 2001, vol. 39, pp. 1381-91.
12. R. Ogawa and J.W. Morris, Jr.: Fatigue at Low Temperatures, ASTM STP 857, R.I. Stephens, ed., American Society for Testing and Materials, Philadelphia, 1985, pp. 47–59.
13. Q. Dai, R. Yang and K. Chen: Materials characterization, 1999, vol. 42, pp. 21-6.10.1016/S1044-5803(98)00043-6 ↗
14. L. Baotong and Z. Xiulin: Mater. Sci. Eng., 1991, vol. A148, pp. 179-88.10.1016/0921-5093(91)90820-D ↗
15. R.L. Tobler and Y.W. Cheng: Fatigue at Low Temperatures, ASTM STP 857, 1985, pp. 3–30.
16. K.A. Esaklul, W. Yu, and W.W. Gerberich: Fatigue at Low Temperatures, ASTM STP 857, R.I. Stephens, ed., American Society for Testing and Materials, Philadelphia, 1985, pp. 63–83.10.1520/STP32747S ↗
17. W.Yu, K. Esaklul and W.W.Gerberich: Metall. Trans. A, 1984, vol. 15A, pp. 889-900.10.1007/BF02644563 ↗
18. T. Yokobori, I. Maekawa, Y. Tanabe, Z. Jin, and S.I. Nishida: Fatigue at Low Temperatures, ASTM STP 857, R.I. Stephens, ed., American Society for Testing and Materials, Philadelphia, 1985, pp. 121–39.10.1520/STP32751S ↗
19. ASTM Standard E466: Standard Practice for Conduction Force Controlled Constant Amplitude Axial Fatigue Test of Metallic Materials, vol. 03.01, Annual book of ASTM standards, 2002.
20. ASTM Standard E647: Standard Test Method for Measurement of Fatigue Crack Growth Rates, vol. 03.01, Annual book of ASTM standards, 2002.
21. G.T. Gray, III, A.W. Thompson and J.C. Williams: Metall. Trans. A, 1985, vol. 16A, pp. 753-60.
22. Y.J. Kim, J.K. Kwon, H.J. Lee, W.K. Jang, J.K. Choi and S.S. Kim: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 986-99.10.1007/s11661-010-0577-8 ↗
23. J.J. Lucas and P.P. Konieczny: Metall. Trans. A., 1971, vol. 2, pp. 911-2.10.1007/BF02662756 ↗
24. S.S. Kim, J.K. Kwon, Y.J. Kim, W.K. Jang, S.G. Lee, and J.K. Choi: Met. & Mater. Int., 2013, in press.
25. K. Tanaka and T. Mura: Metall. Trans. A, 1982, vol. 13A, pp. 117-23.10.1007/BF02642422 ↗
26. K.S. Chan: Metall. Trans. A, 2003, vol. 34A, pp. 43-58.10.1007/s11661-003-0207-9 ↗
27. M.F. Carlson and R.O. Ritchie: Scripta Metall., 1977, vol. 12, pp. 1113-8.10.1016/0036-9748(77)90317-9 ↗
28. T. Kunio, M. Shimizu, K. Yamada, M. Enomoto and A. Yoshitake: Fat. Eng. Mat. Struct., 1979, vol. 2, pp. 237-49.10.1111/j.1460-2695.1979.tb01083.x ↗
29. S. Allain, J.-P. Chateau, O. Bouaziz, S. Migot, N. Guelton: Mater. Sci. & Eng., 2004, vol. A387-389, pp. 158-62.10.1016/j.msea.2004.01.059 ↗
30. K. Tanaka and T. Mura: Acta Metall., 1984, vol. 32, No. 10, pp. 1731-40.10.1016/0001-6160(84)90229-3 ↗
31. E.A. Starke and J.C. Williams: in Fracture Mechanics: Perspectives and Directions, ASTM STP 1020, R.P. Wei and R.P. Gangloff, eds., American Society for Testing and Materials, Philadelphia, 1989, pp. 184–205.10.1520/STP18825S ↗
32. H. Ishii and J. Weertman: Metall. Trans. A., 1971, vol 2, pp. 3441-52.10.1007/BF02811626 ↗
33. J.C. Li, X.X. Lu and Q. Jiang: J. Mater. Sci. Lett., 1999, vol. 18, pp. 1669-70.10.1023/A:1006617530533 ↗
34. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345-51.10.1007/BF02641927 ↗
35. L. Lawson, E.Y. Chen and M. Meshii: Int. J. Fatigue, 1999, vol. 21, pp. S15-S34.10.1016/S0142-1123(99)00053-5 ↗
36. D.L. Davidson and J. Lankford: Int. Mater., 1992, vol. 37, pp. 45-75.10.1179/imr.1992.37.1.45 ↗
37. A.K. Vasudeven, K. Sadananda and N. Louat: Mater. Sci. Eng., 1994, vol. A188, pp. 1-22.10.1016/0921-5093(94)90351-4 ↗