journal article·2010-07

Mapping Residual Stress Distributions at the Micron Scale in Amorphous Materials

Bartlomiej Winiarski, Richard M. Langford, Jiawan Tian, Yoshihiko Yokoyama, Peter K. Liaw, Philip J. Withers

Publisher page

Abstract

Residual stresses in crystalline or glassy materials often play a key role in the performance of advanced devices and components. However, stresses in amorphous materials cannot easily be determined at the micron scale by diffraction, or by other conventional laboratory methods. In this article, a technique for mapping residual stress profiles in amorphous materials with high spatial definition is presented. By applying a focused ion beam (FIB)-based semidestructive mechanical relaxation method, the stresses are mapped in a peened and fatigued bulk metallic glass (BMG) (Zr50Cu 40Al10 at. pct). The residual stresses are inferred using finite element analysis (FEA) of the surface relaxations, as measured by digital image correlation (DIC), that occur when a microslot is micromachined by FIB. Further, we have shown that acceptable accuracy can in most cases be achieved using a simple analytical model of the slot. It was found that the fatigue cycling significantly changes the distribution of compressive residual stresses with depth in the plastically deformed surface layer. Our observations point to the scalability of this method to map residual stresses in volumes as small as 1 × 1 × 0.2 μm3 or less. © The Minerals, Metals & Materials Society and ASM International 2009.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Surface Roughness and Optical Measurements · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. A.L. Greer: Nature, 1999, vol. 402, pp. 132–33.10.1038/45946 ↗
2. D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, and W.L. Johnson: Nature, 2008, vol. 451, pp. 1085–89.10.1038/nature06598 ↗
3. W.L. Johnson: MRS Bull., 1999, vol. 24, pp. 42–56.10.1557/S0883769400053252 ↗
4. A. Inoue, I. Yoshii, H. Kimura, K. Okumura, and J. Kurosaki: Mater. Trans., 2003, vol. 44, pp. 2391–95.10.2320/matertrans.44.2391 ↗
5. J. Das, M.B. Tang, K.B. Kim, R. Theissmann, F. Baier, W.H. Wang, and J. Eckert: Phys. Rev. Lett., 2005, vol. 94, pp. 205501–205504.10.1103/PhysRevLett.94.205501 ↗
6. G.Y. Wang, P.K. Liaw, W.H. Peter, B. Yang, Y. Yokoyama, M.L. Benson, B.A. Green, M.J. Kirkham, S.A. White, T.A. Saleh, R.L. McDaniels, R.V. Steward, R.A. Buchanan, C.T. Liu, and C.R. Brooks: Intermetallics, 2004, vol. 12, pp. 885–92.10.1016/j.intermet.2004.02.043 ↗
7. M.F. Ashby and A.L. Greer: Scripta Mater., 2006, vol. 54, pp. 321–26.10.1016/j.scriptamat.2005.09.051 ↗
8. C.C. Aydiner and E. Ustundag: Mech. Mater., 2005, vol. 37, pp. 201–12.10.1016/j.mechmat.2004.03.001 ↗
9. Y. Zhang, W.H. Wang, and A.L. Greer: Nat. Mater., 2006, vol. 5, pp. 857–60.10.1038/nmat1758 ↗
10. R. Raghavan, R. Ayer, H.W. Jin, C.N. Marzinsky, and U. Ramamurty: Scripta Mater., 2008, vol. 59, pp. 167–70.10.1016/j.scriptamat.2008.03.009 ↗
11. L.Y. Chen, Q. Ge, S. Qu, and J.Z. Jiang: Scripta Mater., 2008, vol. 59, pp. 1210–13.10.1016/j.scriptamat.2008.08.021 ↗
12. F.O. Méar, G. Vaughan, A.R. Yavari, and A.L. Greer: Philos. Mag. Lett., 2008, vol. 88, pp. 757–66.10.1080/09500830802235776 ↗
13. P.J. Withers: Rep. Prog. Phys., 2007, vol. 70, pp. 2211–64.10.1088/0034-4885/70/12/R04 ↗
14. R. Gardon: Elasticity and Strength in Glasses, Academic, New York, NY, 1980, pp. 145–216.10.1016/B978-0-12-706705-6.50010-2 ↗
15. C.C. Aydiner, E. Ustundag, and J.C. Hanan: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2709–15.10.1007/s11661-001-1023-8 ↗
16. C.C. Aydiner, E. Ustundag, M.B. Prime, and A. Peker: J. Non-Cryst. Solids, 2003, vol. 316, pp. 82–95.10.1016/S0022-3093(02)01940-3 ↗
17. R.D. Conner, W.L. Johnson, N.E. Paton, and W.D. Nix: J. Appl. Phys., 2003, vol. 94, pp. 904–11.10.1063/1.1582555 ↗
18. A. Turnbull, J.J. Pitts, and J.D. Lord: Mater. Sci. Technol., 2008, vol. 24, pp. 327–34.10.1179/174328407X185776 ↗
19. H.F. Poulsen, J.A. Wert, J. Neuefeind, V. Honkimaki, and M. Daymond: Nat. Mater., 2005, vol. 4, pp. 33–36.10.1038/nmat1266 ↗
20. J. Das, M. Bostrom, N. Mattern, A. Kvick, A.R. Yavari, A.L. Greer, and J. Eckert: Phys. Rev. B, 2007, vol. 76, pp. 092203-1–092203-4.10.1103/PhysRevB.76.092203 ↗
21. P.J. Withers and H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 355–65.10.1179/026708301101509980 ↗
22. P.J. Withers, M. Turski, L. Edwards, P.J. Bouchard, and D.J. Buttle: Int. J. Pressure Vessels Pip., 2008, vol. 85, pp. 118–27.10.1016/j.ijpvp.2007.10.007 ↗
23. O.E. Kongstein, U. Bertocci, and G.R. Stafford: J. Electrochem. Soc., 2005, vol. 152, pp. C116–C123.10.1149/1.1854093 ↗
24. H. Tada, P. Paris, and G. Irwin: The Stress Analysis of Cracks Handbook, PEP, Bury St. Edmunds, UK, 2000, pp. 82–96.10.1115/1.801535 ↗
25. K.J. Kang, N. Yao, M.Y. He, and A.G. Evans: Thin Solid Films, 2003, vol. 443, pp. 71–77.10.1016/S0040-6090(03)00946-5 ↗
26. N. Sabate, D. Vogel, A. Gollhardt, J. Keller, C. Cane, I. Gracia, J.R. Morante, and B. Michel: J. Micromech. Microeng., 2006, vol. 16, pp. 254–59.10.1088/0960-1317/16/2/009 ↗
27. J.W. Tian, L.L. Shaw, Y.D. Wang, Y. Yokoyama, and P.K. Liaw: Intermetallics, 2009, vol. 17 (11), pp. 951–57.10.1016/j.intermet.2009.04.010 ↗
28. J. Quinta De Fonseca, P.M. Mummery, and P.J. Withers: J. Microsc., 2004, vol. 218, pp. 9–21.10.1111/j.1365-2818.2005.01461.x ↗
29. A.N. Guz: Int. Appl. Mech., 2000, vol. 36, pp. 1537–64.10.1023/A:1011374012608 ↗
30. J.M. Pelletier, Y. Yokoyama, and A. Inoue: Mater. Trans., 2007, vol. 47, pp. 1359–62.10.2320/matertrans.MF200626 ↗
31. K.J. Kang, S. Darzens, and G.-S. Choi: J. Eng. Mater. Technol., 2004, vol. 126, pp. 457–64.10.1115/1.1789965 ↗
32. M. Nastasi and J.W. Mayer: Ion Implantation and Synthesis of Materials, Springer-Verlag, Berlin-Heidelberg, 2006, pp. 49–61.10.1007/978-3-540-45298-0_5 ↗
33. J.F. Ziegler, J.P. Biersack, and U. Littmark: The Stopping Range of Ions in Matter, Pergamon Press, New York, NY, 1985, pp. 67–78.
34. S. Lipp, L. Frey, C. Lehrer, B. Frank, E. Demm, and H. Ryssel: J. Vac. Sci. Technol., 1996, vol. 14, pp. 3996–99.10.1116/1.588630 ↗
35. B.W. Kempshall and L.A. Giannuzzi: J. Vac. Sci. Technol., 2002, vol. 20, pp. 286–90.10.1116/1.1445165 ↗
36. T.J. Kang, J.G. Kim, J.S. Lee, J.H. Lee, J.H. Hahn, H.Y. Lee, and Y.H. Kim: J. Micromech. Microeng., 2005, vol. 15, pp. 2469–78.10.1088/0960-1317/15/12/032 ↗
37. W.J. Arora, H.I. Smith, and G. Barbastathis: Microelectron. Eng., 2007, vol. 84, pp. 1454–58.10.1016/j.mee.2007.01.182 ↗
38. S. Massl, J. Keckes, and R. Pippan: Acta Mater., 2007, vol. 55, pp. 4835–44.10.1016/j.actamat.2007.05.002 ↗
39. P.S. Steif, F. Spaepen, and J.W. Hutchinson: Acta Metall., 1982, vol. 30, pp. 447–55.10.1016/0001-6160(82)90225-5 ↗
40. S. Carlsson and P.L. Larsson: Acta Mater., 2001, vol. 49, pp. 2179–91.10.1016/S1359-6454(01)00122-7 ↗
41. X. Chen, J. Yan, and A.M. Karlsson: Mater. Sci. Eng. A., 2006, vol. 416, pp. 139–49.10.1016/j.msea.2005.10.034 ↗
42. W. Cheng and I. Finnie: Residual Stress Measurement and the Slitting Method, Springer, New York, NY, 2007, pp. 123–35.
43. B. Winiarski and P.J. Withers: Unpublished research.