Influence of annealing conditions on the galvanizability and galvannealing properties of TiNb interstitial-free steels, strengthened with phosphorous and manganese
Source abstract
Abstract
A high-strength interstitial-free (HS IF) steel, solution strengthened with P and Mn, was hot-dip galvanized and galvannealed in a laboratory hot-dip simulator. The dew point of the N2-H2 annealing atmosphere during recrystallization was varied, and the effect of the dew-point changes on the galvannealing kinetics was studied. Annealing in a high-dew-point N2-H2 atmosphere improved the wettability by the zinc and the galvannealing reactivity of the Mn-P-added IF steels considerably. Scanning electron microscopy (SEM) analysis and glow discharge optical emission spectroscopy (GDOES) depth profiles of the surface of the steel sheet and the subsurface region revealed clear differences in oxidation mode after recrystallization annealing. Plane-view SEM and transmission electron microscopy (TEM) analyses were done on the inhibition layer of the as-galvanized samples. Differences in the Mn and P contents were found. By analyzing the Mn and P contents in the coatings during galvannealing, a mechanism was proposed to explain the higher galvannealing reactivity which is observed when the dew point during recrystallization annealing is increased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. I. Hertveldt, B.C. De Cooman, and J. Dilewijns: Proc. 39th Mechanical Working and Steel Processing Conf., Indianapolis, IN, Oct. 1997, ISS, Warrendale, PA, 1997, pp. 105–13.
2. I. Hertveldt, B.C. De Cooman, and S. Claessens: Proc. 4th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’98), Chiba, Japan, ISIJ, Tokyo, Japan, 1998, pp. 230–35.
3. C. Wagner: Z. Elektrochemie, 1959, Bd. 63(7), pp. 772–90.
4. J.M. Mataigne, M. Lamberigts, and V. Leroy: in Developments in the Annealing of Sheet Steels, R. Pradhan and I. Gupta, eds., TMS, Warrendale, 1992, pp. 511–28.
5. G. Luckman, R.A. Didio, and W.R. Graham: Metall. Trans. A, 1981, vol. 12A, pp. 253–59.10.1007/BF02655198 ↗
6. W. van Koesveld, M. Lamberigts, A. van der Heiden, and L. Bordignon: Proc. 3th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’95), Chicago, IL, ISS, Warrendale, PA, 1995, pp. 343–55.
7. H.J. Grabke: Mater. Technol., 1986, vol. 57, pp. 178–85.
8. J. Zijp, I. Van Stijn, and M. Roelofsen: Proc. 39th Mechanical Working and Steel Processing Conf., Indianapolis, IN, Oct. 1997, ISS, Warrendale, PA, 1997, pp. 31–35.
9. M. Guttmann, Y. Lepretre, A. Aubry, M.J. Roch, T. Moreau, P. Drillet, J.M. Mataigne, and H. Baudin: Proc. 3th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’95), Chicago, IL, ISS, Warrendale, PA, 1995, pp. 295–307.
10. C. Coffin and S.W. Thompson: Proc. 3th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’95), Chicago, IL, ISS, Warrendale, PA, 1995, pp. 121–31.
11. Y. Hisamatsu: Proc. 1st Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’89), Tokyo, 1989, Y. Hisamatsu, ed., ISIJ, Tokyo, Japan, pp. 3–12.
12. P.D. Mercer: Proc. 1st Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’89), Tokyo, 1989, Y. Hisamatsu, ed., ISIJ, Tokyo, Japan, pp. 204–08.
13. G.J. Harvey and P.D. Mercer: Metall. Trans., 1973, vol. 4, pp. 619–20.10.1007/BF02648719 ↗
14. G. Claus, B.C. De Cooman, J. Dilewijns, and U. Meers: Proc. 3th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech ’95), Chicago, IL, ISS, Warrendale, PA, 1995, pp. 107–13.